Sunjoy A601002201 User manual

1/ 4
Country of Origin: China Production Number: XXXXXXXXXX
ASSEMBLY INSTRUCTION
Item No.: A601002201
WE HAVE YOU IN MIND, LET US SERVE YOU!
Questions? Issues?
CONTACT US
www.sunjoyonline.com
1-(866)-578-6569
[email protected]

2/ 4
Country of Origin: China Production Number: XXXXXXXXXX
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
Part Part Number Description QTY
A P005100236 Handle(pre-assembled on B) 2
B P003100081 Lid(pre-assembled on C) 1
C P003200011 Basin 1
D P005100237 Drain Plug(pre-assembled on C ) 1
E P007100007 Bottle Opener 1
F P007200010 Bucket 1
G1 P005400390 Leg1 2
G2 P005400391 Leg2 2
H P002300067 Baseboard 1
I P003300047 Caster 2
J P003300048 Caster with brake 2
Part Part Number Description QTY Image
AA H030040007 Bolt(pre-assembled on B) M4*25mm
2
BB H010110048 Bolt(pre-assembled on C) M6*12mm
2
CC H010060001 Bolt M6*12 mm
12
DD H050010023 Washer M6 mm
12
EE H090030002 Wrench M6 mm
1
FF H090010002 Wrench 17mm
1
Warning！
•When they are in the area of the Cooler construction
•Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
•Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read
all instructions before assembly and use.
•Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them
secure!
Im
p
ortant Safet
y
Instructions
Parts List
Hardware Pack

3/ 4
Country of Origin: China Production Number: XXXXXXXXXX
2：Insert the Casters (I & J) to the support legs (G1&G2)
by wrench (FF).
1：Connect the Baseboard (H) with the legs (G1&G2)
using Bolts (CC) and Washers (DD). Do not completely
tighten the bolts.
3：Attach the assembled legs (G1&G2) and the Basin
(C) using Bolts (CC) and Washers (DD). Fully tighten all
the bolts.
4：Remove the Handle (A) and Bolt (AA) from the lid (B) as Fig4.1
Attach the Handles (A) to the Lid (B) using Bolt (AA) as Fig4.2.
Assembly Step

4/ 4
Country of Origin: China Production Number: XXXXXXXXXX
•Before using, clean the cooler with a soft dry towel.
•Drain the water in the cooler and dry the cooler with a soft towel.
•We recommend the use of furniture covers (not included) to protect your cooler while not in use.
•Our iron components for garden accessories and furniture are finished using a powder coating process that protects it from rusting.
However, due to the nature of iron, surface oxidation (rusting) will occur if these protective coatings are scratched. This is a natural
process and is not a defect. To minimize this condition, use care when assembling & handling the product to prevent scratching the paint.
Should any scratching or damage occur, immediately touch-up with rust inhibiting paint, which is readily available at a local hardware
store. Surface rust can also be easily removed with a very light application of cooking oil. If rusting occurs and if no measure is taken to
inhibit this, the rust may start dripping onto a deck or patio and cause damaging stains that may be difficult to remove. This can be
prevented if measures are taken to keep the product from rusting.
•To prolong the life of your cooler, it is recommended that you drain out all liquid and thoroughly dry your cooler after every use. Not
complying with this care requirement can cause premature rusting and water deposits (metal interior) or molds and mildew (for plastic
interior).
This limited warranty is extended to the original purchaser and applies to defects in material and workmanship of your item provided the item
is maintained with care and used only for personal, residential purposes. The manufacturer Sunjoy Group warrants this item is free of defects
in material and workmanship for a period of ONE year. If any defect is found, please call our Sunjoy Group customer service department at
1-866-578-6569 or email at [email protected] for help. The manufacturer Sunjoy Group will not cover transportation or
delivery costs or compensate the individual or any outside party for assembling or disassembling the product.
5：Remove the Bolts (BB) from the Basin (C) as Fig5.1
Attach the Bottle Opener (E to the basin (C) using Bolts (BB).
Insert the Bucket (F) into the clips located on the basin (C).
Cleaning and Maintenance
Product Com
p
onents Maintenance: FOR IRON COMPONENTS
LIMITED WARRANTY
Assembly Step