Hay revolver Leon Ransmeier User manual

 INSTRUCTION MANUAL 
DESIGN BY LEON RANSMEIER
REVOLVER TAB LE

 PARTS 

A Top ring x1

E Allen key x1
Large

B Leg x4

C Bottom ring x1

D Tabletop x1

G Allen key x1
Small

F Screw x4

H Screw x4

I Screw x8

1.
Mount the Legs

B onto the Top Ring

A .

2.
Insert the screws

F and screw them loosely using the Allen key Large

E
to connect the Top ring

A to the legs

F .
3.
Insert the screws

H and screw them loosely using the Allen key Small

G
to connect the Bottom ring

C to the legs

B .

4.
Fully tighten the screws

F using the Allen key Large

E to fix the Top ring

A
to the legs

B .
5.
Fully tighten the screws (

H ) using the Allen key Small (

G ) to secure the Bottom
ring (

C ) to the legs (

B ).

6.
Mount the Tabletop

D onto the Top ring

A .
7.
Place all the screws

I in the holes from underneath to connect the Tabletop

D to
the Top ring

A . Tighten the screws using the Allen key Small

G .

8.
If necessary, adjust the gliders to make the table level.
9.
Done!

 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Revolver Table by scanning the QR code
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
14102021