Hay PALISSADE FIXATION BRACKET User manual

–INSTRUCTION MANUAL –
FOR SEATING
PALISSADE
FIXATION BRACKET
DESIGN BY HAY

–PARTS –


B Allen key x1

C Thicker O-ring x4 
D Thinner O-ring x4
(only for Palissade Park
Dining Bench)

A Fixation bracket x4
–PARTS –

1. Screw a self-tapping
screw into the existing
glider.
4. Insert the fixation bracket into
the leg. Make sure the screw is
untightened.
5. Tighten the screw with the
Allen key. Make sure the fixation
bracket is fully pushed down,
leaving no gap between the leg
and the fixation bracket.
2. Take hold of the screw
and pull the glider out.
3. Mount the O-ring.
Use

D for
Palissade Park Dining Bench
and

C for all other
Palissade models.
–INSTRUCTION –

C

D

A

B

6.
Repeat the process for all four legs and then secure it
to the floor/ground with suitable screws.

–CARE & MAINTENANCE –
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on Palissade Collection by scanning the
QR code
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
25/03/2022