Argos Bolitzo 930/8583 User manual

Bolitzo
Bench
Issue 1 -17/04/20
Spare Parts
www.argos-support.co.uk
[email protected]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
930/8583
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
• From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste.Take to your local
authority waste disposal
centre.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tightend properly.
●This product is compliant BS12520
•This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assemble the item as close
to its final position (in the same
room) as possible.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.

Pt. No
Pt. No
Pt. No
Parts
2
Seat Bench leg
Bench rail
2x4
1x2
3x4

3
Rubber Mallet (Not Provided)
Bag 1
Fittings (Shown to scale)
Cap x 8
A
Tools required
Ruler/tape
measure

4
1
2
Cap x 8
A
1
3
3
2x
2x
Repeat
x2
Repeat
x2
2
3
3
2
2
1
3
2

A
Cap x 8
5
3
4
Assembly complete.
A
A
A
A
2
3
3
2
2x
Repeat
x2
Turn
Product