HDanywhere XTND User manual

QUICK START GUIDE
HDMI CABLE
CAT6 CABLE
INFRARED (IR) CABLE
POWER
1Connect a HDMI source (e.g Satellite/Cable TV, Apple TV,
Xbox etc) to the “HDMI IN” of the XTND transmitter (labelled
TX) using a HDMI cable.
2Connect a Cat6 cable between the “HDBASET” port of the
XTND transmitter (TX) and the “HDBASET” port of the XTND
receiver (labelled RX).
3Connect a display to the “HDMI OUT” of the XTND receiver
(RX) using a HDMI cable
4Power on the XTND Extender by connecting the supplied 24V
power supply to the XTND (TX). XTND will turn on and a
picture will display after several seconds.
5To control your HDMI source from your display location
connect the IR TX to the “IR (OUT)” port on the XTND
transmitter (TX). Ensure that the IR TX is positioned over the
IR window on your source device.
Connect the IR RX to the “IR (IN)” port on the XTND receiver
(RX). Ensure that the IR RX is in-line-of-sight of your source
device remote control. HDMI EXTENDER
FULL MANUAL ON HDANYWHERE.COM/SUPPORT
Distribution:
PureLink GmbH Available from B2B Online Portal

CAT6 RESOLUTION/DISTANCE GUIDE
IN THE BOX
INFRARED (IR) CABLE
HD
INSTALL AT SOURCE LOCATION
0m
0ft 10m 32ft 20m 65ft 30m 98ft 40m
131ft 50m 164ft 60m 197ft 70m 230ft 80m 262ft 90m 295ft 100m 328ft 110m 360ft 120m 393ft 130m 426ft 140m 459ft 150m 492ft
INSTALL AT DISPLAY LOCATION POWER
2x IR RX
1x 24V 1A PSU
1x XTND RECEIVER (RX)
1x XTND TRANSMITTER (TX)
4x MOUNTING WINGS
2x IR TX
FULL MANUAL ON HDANYWHERE.COM/SUPPORT
UHD
Distribution:
PureLink GmbH Available from B2B Online Portal