Heat Storm DIAMANT User manual

INSTRUCTION FOR INSTALLATION
AND USE - GARANTY
You have just acquired this radiant radiator DIAMANT/EMERAUDE
And we thank you for your choice.
is device has been studied, designed and realized with care,
In order to give you full satisfaction.
NO-135003A - ILO DIAMANT/EMERAUDE INSTRUCTION MANUAL ECODESIGN US

Summary
I. Markings & Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
II. General Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Precautions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
III. Installation of radiator DIAMANT/EMERAUDE . . . . . . . . . . . . . . . . . . . . . . . . 6
Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tools required for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation and tting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Reminder of drilling centers . . . . . . . . . . . . . . . . . . . . . . . . 7
Selection of radiator location . . . . . . . . . . . . . . . . . . . 7
Attaching the radiator to the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical connexion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
IV. Technical characteristics of DIAMANT/EMERAUDE . . . . . . . . . . . . . 10
V. Diagnostic Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
VI. Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

I. Markings and indications
DIAMANT/DIAMANT/EMERAUDE 400 x 1200 cm / 16’ x 48’ reference :
THERMAL POWER
Nominal Thermal Power P nom 500 W
Minimal Thermal Power ( indicative) P min 450 W
Maximal Thermal Power (constant) P max 525 W
AUXILIARY ELECTRICAL CONSUMPTION
At nominal thermal power C el 500 W/h
At minimal thermal power C el min 450 W/h
In Sleep mode C el veil 0.5 W/h
DIAMANT/DIAMANT/EMERAUDE 400 x 1800 / 16’ x 72’ reference :
THERMAL POWER
Nominal Thermal Power P nom 750 W
Minimal Thermal Power ( indicative) P min 675 W
Maximal Thermal Power (constant) P max 787.5 W
AUXILIARY ELECTRICAL CONSUMPTION
At nominal thermal power C el 750 W/h
At minimal thermal power C el min 675 W/h
In Sleep mode C el veil 0.5 W/h
DIAMANT/DIAMANT/EMERAUDE 600 x 1200 / 24’ x 48’ all references
THERMAL POWER
Nominal Thermal Power P nom 750 W
Minimal Thermal Power ( indicative) P min 675 W
Maximal Thermal Power (constant) P max 787.5 W
AUXILIARY ELECTRICAL CONSUMPTION
At nominal thermal power C el 750 W/h
At minimal thermal power C el min 675 W/h
In Sleep mode C el veil 0.5 W/h
DIAMANT/DIAMANT/EMERAUDE 600 x 1800 / 24’ x 48’ all references
THERMAL POWER
Nominal Thermal Power P nom 1200 W
Minimal Thermal Power ( indicative) P min 1080 W
Maximal Thermal Power (constant) P max 1260 W
AUXILIARY ELECTRICAL CONSUMPTION
At nominal thermal power C el 1200 W/h
At minimal thermal power C el min 1080 W/h
In Sleep mode C el veil 0.5 W/h
ASSOCIATED EQUIPMENTS
Charge electronic thermal control with information receipt of room temperature and /or exterior temperature Yes
Kind of thermal power control of room temperature ( select one kind)
Electronical control of the room temperature and weekly timer Yes
Other control options ( select one or more options)
Control through contrôle via l pilote (FP) Yes
Room temperature control with open window detection Yes
Activation adaptative control Yes

II. General Instructions
Before installing and using your DIAMANT/EMERAUDE radiator, please
read these instructions carefully and observe the following instructions :
SAFETY INSTRUCTIONS
-The electrical connection must be carried out by a qualied electrician.
The installation must be protected by a 25 or 30 mA differential circuit-
breaker (NFC15-100 electrical safety standard). The power supply outage must be
of omnipolar type (phase and neutral cut-off).
The radiator DIAMANT/EMERAUDE must be connected to the power supply (120V
AC 60Hz) by an electrical circuit protected by an overcurrent circuit breaker10A
placed in an electrical distribution board.
A means of disconnection shall be provided in the xed pipes in accordance
with the installation rules.
If the power cable is damaged, it must be replaced by a qualied electrician
(cable type SJOOW 14/2).
The system complies with current standards (see technical data).
The radiator DIAMANT/EMERAUDE is only suitable for indoor use. It is suitable for
all the rooms of the housing, including bathrooms thanks to a suitable protection
(Double insulation - Class II).

For a bathroom installation, observe the zone of use in compliance with the
protection index IP44: zones 2 and more
The heater should not be placed directly below a power outlet.
Thoroughly test the radiator before installation and ensure that no hot spots
develop.
Only use the radiator DIAMANT/EMERAUDE for the recommended applications
and with the DIAMANT/EMERAUDE accessories offered (bars, regulation) for an
effective guarantee.
Do not attempt to disassemble the unit (loss of warranty).
IPPROTECTION
ACCESSORIES
MATERIAL
Plug supplied by safety transformer
Plug protected by 30mA RCD
Class II and RCD 30mA or Low voltage
Plug protected by 30mA RCD
No Plug
Low voltage (12 to 30V)
Bath Volume Shower with receiver Volume Shower without receiver Volume

This device is not intended for use by persons (including children) with
reduced physical, sensory or mental capacities, or persons without
experience or knowledge, unless they have been By a person responsible for
their safety, supervision or prior instructions relating to the use of the appliance
and that the risks incurred have been apprehended. The radiator DIAMANT/
EMERAUDE is a certied device for its performance and safety.
Caution : As with any heating appliance, some parts may become very hot and
cause burns in case of prolonged contact. Particular attention must be paid
to the presence of children and vulnerable persons.
PRECAUTIONS FOR USE
DIAMANT/EMERAUDE is a glass design device, so it is sensitive to shocks, handle
it with care.
The radiator DIAMANT/EMERAUDE must not be used if the glass panels are
damaged or the radiator has impact marks.
DIAMANT/EMERAUDE is a radiant radiator: do not install any obstacle within 20ft
of its emitting surface.
The emitting surface must face the workpiece and the objects to be heated.
Do not cover the heating facade to ensure radiation efciency and avoid accidental
overheating.
Cut off the radiator DIAMANT/EMERAUDE with the switch and wait for it to cool
down to clean it with a soft, damp cloth. Do not let a child unattended take care of
it.
A long contact with the glass can burnt
The radiant surface can reach 80°C (176°F). respect a minimal distance between
DIAMANT/EMERAUDE and the surrender part.
DIAMANT/EMERAUDE, is hot when in use. to avoid burning, do not leave your skin
touch the hot surface. Combustible material like furnitures, paper, covers, curtains,
clothes shall have a minimum of 50cm (20ft) distance.

III. Installation of radiator DIAMANT/
EMERAUDE
COMPOSITION
The DIAMANT/EMERAUDE extra-ne design radiator consists of:
 •Fromatemperedglassdecorativesurface,
 •Fromanaluminumheatinglm(patented),
 •AmountingsystemforaninstallationHorizontal
or vertical wall,
 •INOPTION;Anelectricalboxandaradioreceiverfor
proper operation of the thermostat
(See package insert).
Towel bars can be added
To your radiator DIAMANT/EMERAUDE before xing it to the wall
To turn it into a real towel dryer: ideal for your bathroom
(accessories supplied separately).
TOOLS REQUIRED FOR INSTALLATION
Minimum tools required
For installation
Accessories not included:
4 screws and 4 dowels suitable
for your wall

INSTALLATION AND FITTING
To facilitate installation of your DIAMANT/EMERAUDE radiator, a template is provided.
It is represented on the back of the packaging (actual dimensions).
• Reminder of drilling centers
HORIZONTAL SPACING
In mm HORIZONTAL
SPACING
X
VERTICAL
SPACING
Y
DIAMANT/EMERAUDE
400x1200 966 / 38,03’ 290/ 11.42’
DIAMANT/EMERAUDE
400x1800 1566 /61.65’ 2 9 0 /11.42 ’
VERTICAL SPACING
In mm HORIZONTAL
SPACING
X
VERTICAL
SPACING
Y
DIAMANT/EMERAUDE
400x1200 2 9 0 /11.42 ’ 966 / 38,03’
DIAMANT/EMERAUDE
400x1800 290/11.42’ 1566 /61.65’
• Selection of radiator location
Position the template on your wall to choose the ideal location of your radiator and rely
on the indicated marks. Remember to keep a minimum distance around the product
(at least 200 mm or 7.87’ recommended from an obstacle or a wall angle).
Adjust the position using a level once the location is validated.
Locate the drilling points according to the size of the radiator.
Drill the wall.

• Attaching the radiator to the wall
Fix the 2 wall brackets with 4 dowels and 4 screws
adapted to the material of your wall.
Glue the 4 foam pads underneath each Hole as shown
in the illustration opposite.
Position the radiator on the wall brackets By sliding it
correctly into the holes.
Lock the radiator the lateral
safety screw provided.
(Left or right of choice).

• Electrical connection
Connect electrically.
L = Phase (brown)
N = Neutral (blue)
The electrical connexion must be
made with a IPX4 box ,
class II, in compliance with regulation.
Protect the supply line with a circuit breaker differential of
25 or 30 mA.
Clean with a soft, damp cloth before heating.
Switch on using the switch located on the side of the
radiator..
PILOT WIRE = FP (black)
Do not plug in if you are not connected to an automated system that manages the Pilot
wire.
Please go page 24 for more detailled information.

IV. Technical characteristics of radiator
DIAMANT/EMERAUDE
Voltage: ~120V/AC (60Hz)
Maximal Intensity per radiator: 5A
Protection Class: II
Potection Index: IP44
Indicated power per room: 54W/m²
Conformity: UL499 & UL2021
DIAMANT/DIAMANT/EMERAUDE RANGE TO DISCOVER
www.ilo-international.com
Power - Area to heat WIDTH LENGTH WEIGHT
500W - 10M² 400mm 120 0 mm 10.6Kg
750W - 15M² 400mm 1800mm 18 Kg
750W - 15M² 600mm 120 0mm 15.6Kg
1100W - 20M² 600mm 1800mm 23Kg
AT TENTION:
Electric Chocs danger.
Do not open, no reparation possible

V. Help with diagnosis
NATURE OF THE PROBLEM CONTROL ACTION
THE RADIATOR DOESN’T HEAT
1. Ensure that the green light is
lighting (power) and the red light
is lighting too
Turn the function button
(The switch on the side
of device) to position I or II
2. The status light
Function is on (green), the
Heater is switched off, the
Red light is not lit
on the side of your radiator
Check the value of setpoint
Room temperature does not
require heat your room
The device is in eco mode
3. The power light (green)
Still does not light up
Ensure that circuit breakers
are activated
THE RADIATOR HEAT PERMANANTLY
Make sure that the temperature
on your thermostat has not been
modied Reset the temperature
Check that the thermostat
is not located near
of an unheated room
Relocated the thermostat
THE DEVICE DOES NOT
FOLLOW THE ORDERS OF THE
PROGRAMMING
Check that the receiver
or thermostat are in operation
Ensure proper use
Of programming.
Push the button on position I
or II
Check batteries
Verify proper operation
of programming
IN ALL OTHER CASES, CONTACT A QUALIFIED PERSON OR OUR SERVICE CENTER (
+1 435.752.6611 )

VI. Guarantee
•5yearsfortheheatingelementoftheradiatorDIAMANT/EMERAUDEand2years
for the
Programmable electronic thermostat.
•Thewarrantyperiodstartsfromthedateofpurchaseonthe
Invoice or receipt.
•Thiswarrantyappliesinadditiontoallstandardlaws.
GUARANTEE CONDITIONS
Any request for guarantee is subject to compliance with the following terms and
conditions:
•Thiswarrantyisvalidonlyfordomesticuseindryspace.
•Thewarrantycoversdefectsarisingduringthemanufactureoftheequipment.
It does not extend to damage caused by third parties (eg transport or assembly).
•Nowarrantyisofferedfordamageresultingfromuseabuse,misuse,accidentsor
natural disasters, damages resulting from other unusual circumstances in connection
with the residential applications.
•Damageresultingfromimpropermaintenanceandcleaning,overload,ordueto
moisture are also excluded from coverage provided by the guaranteed presence.
•The warranty does notapplyiftheproductsarenot installedaccordingtothe
manufacturer’s recommendations.
•Warrantyisvoidifproductsareinstalleddespitedefectsvisible.
• ILO reserves the right to inspect damage on site after agreed to a reasonable
inspection date in order to verify the conformity of the warranty terms and conditions.
•Thiswarrantysupersedesallotherwarranties.Theguaranteeshallbesubjectto
the version of the guarantee in force at the purchase time.
•Ifadefectcoveredbythiswarrantyisfound,themanufacturerwillrepairorreplace
the product free of charge.
•Thereplacedproductwillbenetfromsameguaranteeforthefollowingyears.
NB: Our commitment is limited to the supply of new equipment. Other cost related
are not covered.

GUARANTEE CERTIFICATE
In case of damage during the warranty period or later, please
Contact the manufacturer below:
 •email:[e-mail]
 •HOTLINE:+1435.752.6611
In the case of a return service, please attach this document lled with the
invoice.
N ame: Email :
Street : Product :
ZIP code: Date of purchase :
City : Installater :
Country : Date of installation :
Tel. :
Please attach a copy of the purchase invoice.
HEATSTORM / ENERGYWISE SOLUTIONS 700 W. 1700 S. SUITE 111
LOGAN, UT 84321