hernest H200045 User manual

USER MANUAL
1
Caution
Please consu lt the professionals before installation or repairing. The company takes no liabilities for any damage or
injuries that occur during the installation of the pipes, floor, wall and tub.
Thank you for shopping with Hernest, please read this user manual thoroughly for your full under-
standing, installing, and application of the product. Please have this user manual well-reserved
for future reference.
Before Installation
Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.
Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving
the factory.
Shut off the main water supply before the installation.
Do flush the water supply lines to remove any dirt and debris before installation(IMPORTANT).
Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to
the left and the cold water pipe to the right.
Check for leaks and make sure every joint is safely sealed after the installation,
Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it
into use.
SKU:H200045
Deck Mount Bathroom Mixer Tap

2
Specifications
The distance between the mounting parts can be adjusted according to the actual situation.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
25cm tub spout
BATH and SHOWER switch
Hand-held shower head
Hot and cold water switch
Hand-held shower holder bracket
Hot and cold water inlet pipe
Connecting pipe
1. 5m Shower hose
Gravity ball(251g)
Brass bracket
The hole is 3.5cm The hole is 3.5cm The hole is 3.5cm
1
3
2
4
5
98
7
6

Installation Instruction
Place the tub faucet set in the corresponding hole on the bathtub. Fix the faucet body to the pipe. And place the
base cover over the base.
Screw the pipe to the corresponding base
Install the flexible hose and ensure the flexible hoses are hand tightened in place. The flexible hoses are to be
fitted into the correct inlets for hot water and cold water. (DO NOT USE SPANNER TO TIGHTEN THE HOSES AS THE
O-RING CAN BE DAMAGED)
Connect another side of the flexible hose to the water supply pipe. Make sure they are to be fitted into the correct
outlets for hot water and cold water
Connect the shower hose and hand shower.
Finish.
②
③
①
3
TIPS
Red as hot water pipe, Blue as the cold water pipe
Clean the hot and cold water inlet pipes to prevent debris from entering the inside, damaging the valve body and
affecting the use.
10.1”
3.5”
1.3” 2.1” 2.1”
4.3”
3.6”
1.4”
Gravity ball
COLD HOT

4
For more detail information, please check out www.hernest.com
It will be our pleasure to have your visit.
www.hernest.com
After-Sale Service
If you have any issues with the product, please feel free to contact us online or by phone for customer service.
Phone No.: [phone]
Service E-mail: [email protected]