hernest H200124 User manual

USER MANUAL
1
Caution
Please consult the professionals before installation or repairing. The company takes no liabilities for any damage or
injuries that occur during the installation of the pipes, floor, wall and tub.
Thank you for shopping with Hernest, please read this user manual thoroughly for your full under-
standing, installing, and application of the product. Please have this user manual well-reserved
for future reference.
Before Installation
Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.
Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving
the factory.
Shut off the main water supply before the installation.
Do flush the water supply lines to remove any dirt and debris before installation(IMPORTANT).
Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to
the left and the cold water pipe to the right.
Check for leaks and make sure every joint is safely sealed after the installation,
Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it
into use.
SKU:H200124
Modern Kitchen Sink Touch Activation Faucet

Touch activation: Touch the faucet to turn on or off the water flow.
Safety protection: Automatically turn off the water flow when restricted time(180s) is exceeded.
Separate design: Control unit is separated from the faucet body for handy installing and caring.
Power saving: Powered by 4 AA alkaline batteries and can last for over a year.
2
Technical Info
Control time: <0.5s
Power source: AA battery x4
Water flow restricted time: 180
Standby power consuming: <0.1mA
Waterproof level: IPX5
Water temperature: 0~75 C
Resistant intensity: 16 bar
Minimum water pressure: 0.7 bar
Technical Parameter
Touch the faucet and let go within 300ms to activate the control unit. Touch the faucet once to let the water flow, and
touch it again to stop.
Control Method
Tools You Need

3
Parts List
Installation Instruction
1Place and fix the faucet. 2Tighten it with screwdriver until it's fixed.
Sink
Handle
Signal cable
Outlet gasket
HR028 box
Inlet gasket
Quick adapter
Power line
Battery box
"AA" batteries
Battery box holder
Nut gasket
Lock nut
Outlet nut
Pull-down hose
Hose weight
Inlet hose
Angle valve

5Flush the supply hoses. 6Connect the control box to the faucet.
3Connect the hot and the cold inlet hoses
with the faucet and angle valves. 4Tighten the connections with wrench till
they are fixed.
7Connect the quick connect adapter to
the controller. 8Insert hose into the bottom of the connect adapter.
4

9Connect the signal cable. 10 Install the hose weight.
11 Place batteries in the battery adapter,
and fix the battery box in place.
CAUTION: The battery box should be lean against
the wall or placed on the ground.
12 Connect the power line. 13 Turn on the angle valve and the handle
to test the functionality.
5

6
For more detail information, please check out www.hernest.com
It will be our pleasure to have your visit.
After-Sale Service
If you have any issues with the product, please feel free to contact us online or by phone for customer service.
Phone Number: [phone]
Service E-mail: [email protected]
www.hernest.com