High Sec Labs Mini-Matrix SX42PH-4 User manual

SX42PH-4 SX42PHU-4 SX82PH-4 SX82PHU-4 | QUICK INSTALLATION GUIDE
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only. HDC19961 Rev.1.0
Objectives
•This guide includes instructions for installing and basic operation of HSL’s DP/HDMI Mini-Matrix SX42PH-4, SX42PHU-4, SX82PH-4, SX82PHU-
4 devices.
•For further assistance please refer to HSL website: http://www.highseclabs.com
•The following diagram references the SX42PHU-4 device but it is applicable to devices covered in this manual.
Quick Installation Guide
4/8 Ports High Security DP/HDMI
Mini-Matrix KVM Switches
Installation Precautions:
Do not connect this product to computing devices that:
•Are TEMPEST computers
•Include telecommunication equipment
•Include frame grabber video cards
•Include special audio processing cards.
WARNING: Peripherals' Warning - For security reasons, this product
does not support wireless keyboards. It is recommended not to
connect a microphone or headset to the audio output port.
NOTE: In order to comply with the product’s Common Criteria
evaluation and to prevent unauthorized administrative access to
the product, the default administrator username and password
must be changed prior to first product use.
SX42PHU-4 Model is shown
Rear Panel Index:
1. PC fUSB input
2. PC Keyboard/Mouse input
3. Analog audio input
4. DP/HDMI input
5. Console Mouse USB
6. Mouse LED
7. Console Keyboard USB
8. Left Display DP/HDMI Out
9. Console Keyboard LED
10. Left Display EDID LED
11. Audio out
12. fUSB LED
13. fUSB out
14. Right Display EDID LED
15. RDC in –remote AFP connection
16. Right Display DP/HDMI Out
17. DC in
Introduction
Thank you for purchasing this HSL Secure Mini-Matrix KVM Switch. This Mini-Matrix Switch is designed for use in secure defense and intelligence
environments across wide security gaps.
Unlike a regular secure KVM switch that enables the user to view and interact with only one of the connected computers at a time, this secure
mini-matrix enables viewing two of the connected computers and interact with them easily and intuitively.

SX42PH-4 SX42PHU-4 SX82PH-4 SX82PHU-4 | QUICK INSTALLATION GUIDE
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only. HDC19961 Rev.1.0
Important Notes:
1. Anti-Tampering System: This HSL high
security product is equipped with an always-on
active anti-tampering system. If mechanical
intrusion is detected, the product is
permanently disabled and abnormal LED
behavior is activated, with all LEDs blinking
continuously.
2. Power ON Self-Test Procedure: As the
product powers-up, it performs a self-test
procedure. In case of self- test failure for any
reason, including jammed buttons, the product
is inoperable and self-test failure is indicated by
abnormal LED behavior.
In the above-mentioned cases, please call
Technical Support and avoid using the product.
For further information please refer to the
product administrator and setup guides.
Installation:
•Verify that all peripherals and
computers are turned OFF prior to
connecting them to the product.
•Connect the computers and peripherals
to the HSL Mini-Matrix as shown in the
above diagram.
•It is possible to connect an HSL AFP
(remote control) to the RDC port of
these devices. Please refer to the AFP
datasheet on how to connect it.
•Power ON the monitors and the PCs:
Make sure that the monitors are turned
ON prior to powering ON the Mini-
Matrix
•Power ON the system: Power ON the
KVM by plugging it to the AC wall outlet.
By default, after product power-up, the
active channel will be computer #1
•NOTE : HSL devices covered by this
manual include a special DP/HDMI
connector, enabling the user to use the
product with both video formats as
input and output.
NOTE : In models supporting fUSB, it is
possible to connect additional USB devices
and use them on the host PCs. By default,
authentication devices such as CAC readers,
smart card readers, and biometric readers
are enabled. It is possible to enable other
USB devices. Please refer to HSL’s
administrator manual on how to enable
additional USB devices.
Using the HSL Mini-Matrix:
Control of the HSL Mini-Matrix is done,
primarily, using the illuminated push buttons
on the product front panel.
•Display association: Users can control
which of the connected PCs is projected
on either the left or right display, using
the right and left channel select buttons
accordingly.
•The HID devices: (mouse and
keyboard), audio, and fUSB (when
applicable) are controlled by the central
control keys. The user has complete
flexibility regarding which computers to
project and to control including viewing
the same PC on both displays.
By default the HID devices will follow
the display association.
•Cursor Navigation: The second mode of
operation is by using CNS (cursor
navigation switching) in which users can
move their HID devices between the left
and right display, using mouse
movement. This function is enabled by
default and requires the user to press
and hold the CTRL key, while dragging
the mouse between the left and right
display (changing control between the
left and right projected PC).
EDID Acquisition
When using the HSL Mini-Matrix, it is
assumed that both connected displays are
the same or use the same native resolution.
EDID is acquired from the left display only
and duplicated to all channels.
If the two displays are not the same, place
the display with the lower native resolution
on the left display console port.
Mini-Matrix Front Panel/Rear
Panel LED Indications:
The HSL Mini-Matrix has several indications on
its front and rear panels:
EDID LED (rear panel):
•Off –no EDID
•Flicker –EDID read in progress
•On –EDID received
Note: EDID is only read in the first few seconds
of device boot. The secure switch does not
support hot plug or swap of display while
working. in every swap of display it is
recommended to restart the KVM.
fUSB LED:
•Off –no device detected
•Flicker –device rejected
•On- device approved
HID LED:
•Off –no device detected
•Flicker –device rejected
•On- device approved
Front Panel LEDs Index:
1. Active Channel LED indicator
2. Left/Right Keyboard/Mouse control
LEDs
3. Left/Right fUSB freeze LED indicators
4. Left/Right audio freeze LED indicators
5. Keyboard LEDs for Num/CAPS/SCRL
locks

SX42PH-4 SX42PHU-4 SX82PH-4 SX82PHU-4 | QUICK INSTALLATION GUIDE
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only. HDC19961 Rev.1.0
Safety and Regulatory Statements
Safety Symbols
This One or more of the following symbols may be included in your
product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the user
to the presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off switch
is in the ON position.
Power Off: This symbol indicates the principal on/off switch
is in the OFF position.
Protective Grounding Terminal: This symbol indicates a
terminal which must be connected to earth ground prior to
making any other connections to the equipment.
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible damage to
equipment, please observe the following precautions.
•Instructions: Do not disable the power grounding plug. The
grounding plug is an important safety feature.
•Plug the power cord into a grounded (earthed) outlet that is
easily accessible at all times.
•Disconnect the power from the product by unplugging the
power cord from either the electrical outlet or the product. The
AC inlet is the main disconnect for removing power to this
product. For products that have more than one AC inlet, to
remove power completely, all AC line cords must be
disconnected.
•This product has no serviceable parts inside the product
enclosure. Do not open or remove product cover.
CAUTION: Some HSL products contain a lithium battery. This battery is not a
field replaceable item, and replacement should not be attempted by a user.
If errors occur when using the product and the battery is suspected, contact
HSL Technical Support.
WARNING: For Service Personnel Only - There is a risk of explosion if the
battery is replaced with an incorrect type. Dispose of used batteries
according to the manufacturer’s instructions.
This product is for use with other products that are Listed or
Certified by a Nationally Recognized Testing Laboratory (NRTL).
NIAP Protection Profile
This product is certified to the NIAP Protection Profile PSD version
4.0 certification for peripheral sharing switch devices.
Security Vulnerability
If you are aware of a potential security vulnerability while installing
this product, contact Technical Support immediately by:
•Web form: www.highseclabs.com/support/case/
•Email: [e-mail]
•Tel: [phone]
CAUTION: Anti-tamper Caution - This product is equipped with an
always-on, active anti-tampering system. Any attempt to open the product
enclosure will activate the anti-tamper triggers, rendering the unit
inoperable and voiding its warranty.
WARNING: Unit Enclosure Warning - If the unit’s enclosure appears
disrupted or if all LEDs flash continuously, remove the product from service
immediately and contact Technical Support.
Change Management
For change management tracking, perform a quarterly log check to
verify that the RFD was not improperly used to override the current
device policy by an unauthorized person.