HighPoint HS8004F User manual

1
HS8004F
Heat Sink
Quick Installation Guide
V1.00

2
Kit Contents
!
1x HS8004F
HS8004F
Hardware
Front
View
Back view

3
Hardware
Requirements
•
The HS8004F is an optional cooling accessory for the SSD7104
controller (SSD7104– Sold Separately)
H
S8004F Setup
1.
On the rear of the SSD7104, remove the six screws that secure the
unit’s heat sink to the PCB. After removing the screws, carefully
remove the heat sink from the SSD7104.
2.
Carefully remove the blue plastic film covering the large thermal
pad from the back of the HS8004F.

4
3.
Align the HS8004F with the SSD7104 controller, and refasten the
6 screws that were removed in step 1
4.
Carefully insert the HS8004F fan power cord into the fan power
port of the SSD7104.
Successful installation:

5
HighPoint
Controller
SSD7104
4x M.2 Port to PCIe 3.0x16 NVMe
RAID Controller
R
esources
Product reference page
:
https://highpoint
-tech.com/USA_new/cs-cable_ac.htm
Support SSD7000 Series RAID Controllers
:
SSD710
4:
https://highpoint
-tech.com/USA_new/series-ssd7104-overview.htm
NVMe
FAQ & Troubleshooting Information:
https://highpoint
-tech.com/USA_new/support-faq-nvme.htm

6
Customer Support
If you encounter any problems while utilizing the
HS8004F， or have
any questions about this or any other HighPoint Technologies, Inc.
product, feel free to contact our
Customer Support Department.
Web Support:
https://highpoint-tech.com/websupport/
HighPoint Technologies, Inc. websites:
https://highpoint
-tech.com
© Copyright 2020 Highpoint Technologies, Inc. All rights reserved.