HIK VISION DS7324HUHI-K4 User manual

Digital Video Recorder
Quick Start Guide

Digital Video Recorder Quick Start Guide
1
Quick Start Guide
COPYRIGHT © 2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user
manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise
stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied,
regarding to the Manual.
About this Manual
This Manual is applicable to Turbo HD Digital Video Recorder (DVR).
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in
the company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT
WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR
OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW.
HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Digital Video Recorder Quick Start Guide
2
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the EMC
Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to
your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Digital Video Recorder Quick Start Guide
3
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety regulations of the
nation and region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100~240 VAC, 12 VDC or 48 VDC according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause over-heating or a
fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable,
and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping
it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
Symbol
Description
Provides additional information to emphasize or supplement important points of
the main text.
Indicates a potentially hazardous situation, which if not avoided, could result in
equipment damage, data loss, performance degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will result in death
or serious injury.

Digital Video Recorder Quick Start Guide
4
Chapter 1 Rear Panel Interfaces Description
The rear panel interfaces vary with different models. Refer to Table 1-1 for the common interfaces description
of rear panels.
Table 1-1 Common Interfaces Description of Rear Panels
Chapter 2 Installation and Connections
2.1 DVR Installation
During installation of the DVR:
Use brackets for rack mounting.
Ensure ample room for audio and video cables.
When routing cables, ensure that the bend radius of the cables are no less than five times than its
diameter.
Connect the alarm cable.
Allow at least 2 cm (≈0.75-inch) of space between racks mounted devices.
Ensure the DVR is grounded.
Environmental temperature should be within the range of -10 to +55º C, +14 to +131º F.
Environmental humidity should be within the range of 10% to 90%.
Item
Description
Item
Description
VIDEO IN
BNC interface for Turbo HD and analog
video input
VIDEO OUT
BNC connector for video output
AUDIO IN
RCA connector
AUDIO OUT
RCA connector
LINE IN
Connector for two-way audio input
USB
Interface
Universal Serial Bus (USB) port
for additional devices
VGA
DB15 connector for VGA output.
Displays local video output and menu.
HDMI
HDMI video output connector
RS-485
Interface
Connector for RS-485 devices
RS-232
Interface
Connector for RS-232 devices
LAN
Connector for network
eSATA
Storage and expansion interface
for record or backup
ALARM
IN/OUT
Connector for alarm input/output
GND
Ground
Power
Switch
Switch for turning on/off the device
Power
Supply
100 to 240 VAC, 48 VDC, or 12
VDC for different models

Digital Video Recorder Quick Start Guide
5
2.2 HDD Installation
Before you start
Before installing a hard disk drive (HDD), please make sure the power is disconnected from the device. A factory
recommended HDD should be used for the installation.
Tools Required: Cross screwdriver.
2.2.1 Bracket Installation
Bracket installation is applicable when you need to remove the cover of the device and install the HDD to the
internal bracket.
Step 1 Remove the cover from
device by unfastening the
screws on the back and
pushing the cover
backwards.
Step 2 Fix the HDD on the bracket
with screws.
To install the HDD on the bracket
of lower layer, uninstall the
bracket of upper layer first.
Step 3 Connect the data cable and
power cable.
1) Connect one end of data cable to
the device motherboard.
2) Connect the other end of data
cable to HDD.
3) Connect power cable to HDD.
Step 4 (Optional) Repeat the steps above to install other HDDs.
Step 5 Reinstall the device cover and fasten screws.
2.2.2 Front Panel Plug-Pull Installation
Front panel plug-pull installation is applicable when you need to open the device front panel with key and install
the HDD.
Step 1 Fix mounting ears to HDD
with screws.
Step 2 Unlock the front panel with
the attached key, and press
the buttons on both sides of
the front panel to open it.
Step 3 Insert the HDD until it is
fixed firmly.

Digital Video Recorder Quick Start Guide
6
Step 4 (Optional) Repeat the steps above to install other HDDs.
Step 5 Close the front panel and lock it with key.
2.2.3 Fix-on-Bottom Installation
Fix-on-bottom installation is applicable when you need to install and fix the HDD on the device bottom.
Step 1 Remove the cover from device
by unfastening the screws on
panels.
Step 2 Connect the data cable and
power cable.
1) Connect one end of data cable to
the device motherboard.
2) Connect the other end of data
cable to HDD.
3) Connect one end of power cable
to HDD.
4) Connect the other end of power
cable to the device motherboard.
Step 3 Set the device up,
match HDD screw
threads with the
reserved holes on the
device bottom, and fix
HDD with screws.
Step 4 (Optional) Repeat the steps above to install other HDDs.
Step 5 Reinstall the device cover and fasten screws.
2.3 RS-485 and Controller Connection
To connect PTZ to the DVR:
Step 1 Disconnect pluggable block from the
RS-485 terminal block.
Step 2 Press and hold the orange part of the
pluggable block, insert signal cables
into slots, and release the orange
part. Ensure signal cables are in tight.
Step 3 Connect A+ on PTZ to D+ on terminal
block and B- on controller to D- on
terminal block. Fasten stop screws.
Step 4 Connect pluggable block back into
terminal block.
Typical Connection:
Figure 2-1 Controller Connection A
Make sure both the controller and DVR are grounded.

Digital Video Recorder Quick Start Guide
7
Chapter 3 Menu Operation
3.1 Startup
Proper startup is crucial to expanding the life of the DVR.
Step 1 Check the power supply is plugged into an electrical outlet.
It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with
the device. The Power button on the front panel should be red, indicating the device is receiving the
power.
Step 2 Press the POWER button on the front panel.
The Power LED should turn blue. The unit will begin to start.
3.2 Activating Your Device
Purpose
For the first-time access, you need to activate the device by setting an admin password. No operation is allowed
before activation. You can also activate the device via Web Browser, SADP or client software.
Step 1 Enter the same password in the text fields of
Create New Password and Confirm New
Password.
Step 2 In the IP Camera Activation text field, enter the
password to activate the IP camera (s)
connected to the device.
Step 3 Click OK to save the password and activate the
device.
STRONG PASSWORD RECOMMENDED–We highly
recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at
least three of the following categories: upper case letters,
lower case letters, numbers, and special characters.) in
order to increase the security of your product. And we
recommend you reset your password regularly, especially
in the high security system, resetting the password
monthly or weekly can better protect your product.
Figure 3-1 Set Admin Password
Clear-text password is supported. Click and
you can see the clear text of the password.
Click the icon again and the content of the
password restores invisible (the same below).

Digital Video Recorder Quick Start Guide
8
3.3 Using the Unlock Pattern for Login
Purpose
For the Admin user, you can configure the unlock pattern for device login.
After the device is activated, you can configure the device unlock pattern.
Step 1 Use the mouse to draw a pattern among the 9
dots on the screen. Release the mouse when the
pattern is done.
Connect at least 4 dots to draw the pattern.
Each dot can be connected for once only.
Step 2 Draw the same pattern again to confirm it. When
the two patterns match, the pattern is configured
successfully.
Step 3 You can use the configured unlock pattern for
future login.
Figure 3-2 Draw the Pattern
3.4 User Login
Purpose
If DVR has logged out, you must log in to the device before operating the menu and other functions.
Step 1 Select the User Name in the drop-down list.
Step 2 Enter the Password.
Step 3 Click OK to log in.
For the admin, if you have entered the wrong password for 7
times, the account will be locked for 60 seconds. For the
operator, if you have entered the wrong password for 5
times, the account will be locked for 60 seconds.
Figure 3-3 Login

Digital Video Recorder Quick Start Guide
9
3.5 User Logout, Shutdown and Reboot
Purpose
You can log out of the system, shut down, or reboot the device on your demands.
Step 1 Go to Menu > Shutdown.
Step 2 Click Logout,Shutdown, or Reboot.
After you have logged out of the system, menu operation
on the screen is invalid. It is required to enter a user
name and password to unlock the system.
Figure 3-4 Logout
3.6 Configuring Signal Input
Purpose
For some models, you can configure the analog and IP signal input types and 5 MP long distance transmission.
For other models, the analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP signal input can be recognized
and connected automatically.
Step 1 Go to Menu > Camera > Signal Input Status.
Figure 3-5 Signal Input Status
The Signal Input Status interface differs with different models.
Step 2 Check the checkbox to select different
signal input types: HD/CVBS and IP.
Step 3 Click to enter the 5 MP Long Distance
Transmission Settings interface.
Step 4 Check the channel(s) to enable 5 MP long
distance transmission.
Step 5 Click Apply to save the settings and OK to
return to the Signal Input Status interface.
Step 6 Click Apply on the Signal Input Status
interface.
Figure 3-6 5 MP Long Distance Transmission Settings

Digital Video Recorder Quick Start Guide
10
3.7 Adding IP Cameras
Purpose
Before you can get live video or record the video files, you should add the network cameras to the connection
list of the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the User Manual for activating the inactive IP camera.
Step 1 Go to Menu > Camera > IP Camera.
Step 2 Select the IP camera from the list and
click to add the camera (with the
same admin password of the DVR’s).
Step 3 (Optional) Check Enable H.265 (For
Initial Access) for the connected IP
camera supporting H.265. Then the IP
camera will be encoded with H.265.
Figure 3-7 Add IP Camera
3.8 Connecting PoC Cameras
Purpose
Some models support PoC (Power over Coaxitron) cameras connection. DVR will detect the connected PoC
cameras automatically, manage the power consumption via the coaxial communication, and provide power to
the cameras via coaxitron.
Before you start
Connect the PoC camera to the DVR.
Step 1 Go to Menu > Camera > PoC Information.
Figure 3-8 PoC Information
Step 2 Check the status of connected PoC camera.
If the power consumption of
the DVR is lower than that of
AF camera, when AF or AT
camera is connected, there is
no video and “Insufficient
If the power consumption of the
DVR is higher than that of the AF
camera and lower than that of
the AT camera, when AF camera
is connected, it is powered on
If the power consumption of
the DVR is higher than that of
the AT camera, when AF or AT
camera is connected, it is
powered on normally.

Digital Video Recorder Quick Start Guide
11
Power for PoC”is overlaid on
the live view image.
normally; when AT camera is
connected, it is powered on and
then powered off, and there is no
video and “Insufficient Power for
PoC”is overlaid on the live view
image.
Figure 3-9 Note on Live View Image
Step 3 Check the connected AF or AT camera number and the connectable camera number.
Only Hikvision PoC camera is supported.
The maximum connectable AT/AF camera number varies with different models.
Do not unplug or plug the PoC camera if it is powered by the external power supply.
3.9 Network Settings
3.9.1 Configuring General Settings
Purpose
Network settings must be properly configured before you operate DVR over network.
Step 1 Go to Menu > Configuration >
Network > General.
Step 2 Configure the general parameters of
network.
Step 3 Click Apply to save the settings.
Figure 3-10 Network Settings
3.9.2 Configuring Hik-Connect
Purpose
Hik-Connect provides the mobile phone application and the service platform page (www.hik-connect.com) to
access and manage your connected DVR, which enables you to get a convenient remote access to the
surveillance system.
The Hik-Connect can be enabled via operation on SADP software, GUI and Web browser. We introduce the
operation steps on GUI in this section.
Step 1 Go to Menu > Configuration > Network >
Platform Access.
Figure 3-11 Hik-Connect Settings

Digital Video Recorder Quick Start Guide
12
Step 2 Check the Enable checkbox to activate the function.
Then the Service Terms interface pops up.
1) Create the verification code and enter the code in
the Verification Code text field.
2) Check the checkbox of The Hik-Connect service will
require internet access. Please read Service Terms
and Privacy Statement before enabling the
service.
3) Scan the QR code on the interface to read the
Service Terms and the Privacy Statement.
4) Click OK to save the settings and return to the
Hik-Connect interface.
Figure 3-12 Service Terms
Hik-Connect is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms interface pops up and you should check the
checkbox before enabling it.
Step 3 (Optional) Check Custom and enter the Server
Address.
Step 4 (Optional) Check Enable Stream Encryption.
After this feature is enabled, the verification
code is required for remote access and live view.
You can use the scanning tool of your phone to quickly get
the code of the device by scanning the QR code.
Figure 3-13 Hik-Connect Settings
Step 5 Click Apply to save the settings.
Step 6 After configuration, you can access and manage the DVR by your mobile phone or by the website
(www.hik-connect.com).
For the iOS users, please scan the QR code below
to download the Hik-Connect application for the
subsequent operations.
Figure 3-14 QR Code for iOS Users
For the Android users, please scan the QR code
below to download the Hik-Connect application
for the subsequent operations. You must install
googleplay on your Android mobile phone to skip
to the address successfully.
Figure 3-15 QR Code for Android Users

Digital Video Recorder Quick Start Guide
13
Please refer to the help file on the official website (www.hik-connect.com) and the Hik-Connect Mobile Client
User Manual for adding the device to Hik-Connect and more operation instructions.
3.10 Live View
Icons are provided on screen in Live View mode to indicate camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the upper-right corner of the screen for each channel, showing the
status of the record and alarm in the channel for quick reference.
Alarm (video loss, tampering, motion detection, VCA or sensor alarm)
Record (manual record, continuous record, motion detection, VCA or alarm triggered record)
Alarm and Record
Event/Exception (event and exception information, appears at the lower-left corner of the screen.)
3.11 Recording Settings
Before you start
Make sure that the disk has already been installed. If not, please install a disk and initialize it. You may refer to
the user manual for detailed information.
Purpose
Two kinds of record types are introduced in the following section, including Instant Record and All-Day Record.
And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.
Step 1 Click Start Recording from the
right-click menu.
Step 2 Select Continuous Record or
Motion Detection Record on your
demand.
Step 3 Click Yes in the pop-up box to
confirm the settings.
Figure 3-16 Start Recording from Right-Click Menu

Digital Video Recorder Quick Start Guide
14
3.12 Playback
Purpose
The recorded video files and pictures on the hard disk can be played back in the following modes: instant
playback, all-day playback for the specified channel, and playback by normal/event/smart/tag/system
logs/sub-periods/external file search/picture.
Step 1 Go to Menu > Playback.
Step 2 Check the channel(s) in the channel list for
playback.
Step 3 Double click a date on the calendar.
Step 4 (Optional) Use the toolbar in the bottom
part of Playback interface to control the
playing progress.
Step 5 (Optional) Select the channel(s) to execute
simultaneous playback of multiple
channels.
Figure 3-17 Playback

Digital Video Recorder Quick Start Guide
15
Chapter 4 Accessing by Web Browser
You shall acknowledge that the use of the product with Internet access might be under network security risks.
For avoidance of any network attacks and information leakage, please strengthen your own protection. If the
product does not work properly, please contact with your dealer or the nearest service center.
Purpose
You can get access to the device via web browser. You may use one of the following listed web browsers:
Internet Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Ex plorer 10.0,
Apple Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024*768 and above.
Step 1 Open web browser, enter the IP address of the
device and then press Enter.
Step 2 Log in to the device.
If the device has not been activated, you need
to activate the device first by setting the
password for the admin user account.
If the device is already activated, enter the
user name and password in the login
interface, and click Login.
Step 3 Install the plug-in before viewing the live video and
managing the camera. Please follow the installation
prompts to install the plug-in.
You may have to close the web browser to finish the
installation of the plug-in.
After login, you can perform the operation and
configuration of the device, including the live view,
playback, log search, configuration, etc.
Figure 4-1 Activate the Device
Figure 4-2 Login
03050501080116
UD08726B