HIK VISION DS-KH6320-LE1/White User manual

Network Indoor Staon
Conguraon Guide

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product.
Pictures, charts, images and all other informaon hereinaer are for
descripon and explanaon only. The informaon contained in the Manual
is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision
website ( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals
trained in supporng the Product.
Trademarks
and other Hikvision's trademarks and logos are the
properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their
respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL
AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”.
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS
AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
Network Indoor Staon Conguraon Guide
i

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,
FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION
OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN
THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and
processed. To protect data, the development of Hikvision devices
incorporates privacy by design principles. For example, for device with facial
recognion features, biometrics data is stored in your device with
encrypon method; for ngerprint device, only ngerprint template will be
saved, which is impossible to reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and transfer
data in accordance with the applicable data protecon laws and regulaons,
including without limitaon, conducng security controls to safeguard
personal data, such as, implemenng reasonable administrave and
physical security controls, conduct periodic reviews and assessments of the
eecveness of your security controls.
Network Indoor Staon Conguraon Guide
ii

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided, will or
could result in death or serious injury.
Cauon Indicates a potenally hazardous situaon which, if not
avoided, could result in equipment damage, data loss,
performance degradaon, or unexpected results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
Network Indoor Staon Conguraon Guide
iii

Safety Instrucon
Warning
●All the electronic operaon should be strictly compliance with the electrical safety
regulaons, re prevenon regulaons and other related regulaons in your local
region.
●Please use the power adapter, which is provided by normal company. The power
consumpon cannot be less than the required value.
●Do not connect several devices to one power adapter as adapter overload may
cause over-heat or re hazard.
●Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
●When the product is installed on wall or ceiling, the device shall be rmly xed.
●If smoke, odors or noise rise from the device, turn o the power at once and
unplug the power cable, and then please contact the service center.
●If the product does not work properly, please contact your dealer or the nearest
service center. Never aempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cauon
●Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons
surface or places subject to shock (ignorance can cause equipment damage).
●Do not place the device in extremely hot (refer to the specicaon of the device
for the detailed operang temperature), cold, dusty or damp locaons, and do not
expose it to high electromagnec radiaon.
●The device cover for indoor use shall be kept from rain and moisture.
●Exposing the equipment to direct sun light, low venlaon or heat source such as
heater or radiator is forbidden (ignorance can cause re danger).
●Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfuncon however), and aecng the
endurance of sensor at the same me.
Network Indoor Staon Conguraon Guide
iv

●Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the ngers may erode the
surface coang of the device cover.
●Please use a so and dry cloth when clean inside and outside surfaces of the
device cover, do not use alkaline detergents.
●Please keep all wrappers aer unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportaon without the original wrapper may result in damage on the device
and lead to addional costs.
●Improper use or replacement of the baery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used baeries
according to the instrucons provided by the baery manufacturer.
●Input voltage should meet both the SELV and the Limited Power Source according
to 60950-1 standard.
●The power supply must conform to LPS. The recommended adaptor models and
manufacturers are shown as below. Use the aached adapter, and do not change
the adaptor randomly.
Model Manufacturer Standard
ADS-24S-12 1224GPCN SHENZHEN HONOR
ELECTRONIC CO.,LTD
CEE
G0549-240-050 SHENZHEN GOSPELL DIGITAL
TECHNOLOGY CO.,LTD
CEE
TS-A018-120015Ec SHENZHEN TRANSIN
TECHNOLOGIES CO., LTD
CEE
Network Indoor Staon Conguraon Guide
v

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC compliance: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful
interference in a residenal installaon. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not
occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to
the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operaon.
Network Indoor Staon Conguraon Guide
vi

EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Direcve
2014/30/EU, RE Direcve 2014/53/EU,the RoHS Direcve 2011/
65/EU
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collecon points. For more informaon
see: www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentaon for specic
baery informaon. The baery is marked with this symbol,
which may include leering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the baery to your
supplier or to a designated collecon point. For more informaon
see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operaon is subject to the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may
cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radioexempts de licence. L'exploitaon est autorisée aux deux
condions suivantes :
Network Indoor Staon Conguraon Guide
vii

1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est suscepble d'en compromere le
fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmier by Industry Canada. To reduce potenal radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur
radio peut fonconner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émeeur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à l'intenon des autres
ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
Cet équipement doit être installé et ulisé à une distance minimale de 20
cm entre le radiateur et votre corps.
Network Indoor Staon Conguraon Guide
viii

Contents
1 About this Manual ...................................................................................... 1
2 Local Operaon .......................................................................................... 2
2.1 Acvate Indoor Staon ..................................................................................... 2
2.2 Quick Operaon ................................................................................................ 2
2.3 Basic Sengs .................................................................................................... 5
2.3.1 Set Indoor Staon Network Parameters ................................................... 5
2.3.2 Set Linked Device IP .................................................................................. 6
2.3.3 Set Indoor Staon No. .............................................................................. 7
2.3.4 Add Camera .............................................................................................. 8
2.3.5 Zone and Alarm Sengs ........................................................................... 8
2.4 Password Sengs ........................................................................................... 11
2.5 Synchronize Time ............................................................................................ 12
2.6 Sound Sengs ................................................................................................. 13
2.7 Restore Indoor Staon .................................................................................... 14
2.8 System Sengs ............................................................................................... 15
2.9 View Open Source Soware License ............................................................... 16
3 Remote Operaon via the Client Soware ............................................... 17
3.1 Acvate Device Remotely ............................................................................... 17
3.2 Device Management ....................................................................................... 17
3.2.1 Add Video Intercom Devices .................................................................. 18
3.2.2 Modify Network Informaon ................................................................. 20
3.3 System Conguraon ...................................................................................... 21
Network Indoor Staon Conguraon Guide
ix

3.4 Remote Conguraon ..................................................................................... 21
3.4.1 System .................................................................................................... 21
3.4.2 Video Intercom ....................................................................................... 26
3.4.3 Network .................................................................................................. 31
3.5 Person Management ....................................................................................... 34
3.5.1 Organizaon Management ..................................................................... 35
3.5.2 Person Management .............................................................................. 36
A. Communicaon Matrix and Device Command ....................................... 40
Network Indoor Staon Conguraon Guide
x

1 About this Manual
Get the manual and related soware from or the ocial website (hp://
www.hikvision.com).
Product Model
Network Indoor Staon DS-KH6320-LE1/DS-KH6320-LSE1/DS-
KH6220-LE1
Network Indoor Staon Conguraon Guide
1

2 Local Operaon
2.1 Acvate Indoor Staon
You can only congure and operate the indoor staon aer creang a password for
the device acvaon.
Steps
1. Power on the device. It will enter the acvaon page automacally.
Figure 2-1 Acvaon Page
2. Create a password and conrm it.
3. Tap OK to acvate the indoor staon.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special characters)
in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
2.2 Quick Operaon
Aer device acvaon, the wizard page will pop up.
Network Indoor Staon Conguraon Guide
2

Steps
1. Choose Language and tap Next.
2. Set network parameters and tap Next
-Edit IP Address, Subnet Mask and Gateway.
-Enable DHCP, the device will get network parameters automacally.
Figure 2-3 Network Parameters
3. Select the device type.
-Select Indoor Staon, and set the oor and room No. Tap Next, and set the
linked main door staon.
Note
If the main door staon and the indoor staon are in the same LAN, the main
door staon will be displayed in the list. Tap the device or enter the serial No. to
link.
Network Indoor Staon Conguraon Guide
3

Figure 2-4 Indoor Staon Sengs
-Select Indoor Extension, and set the No. Tap Next, and set the linked indoor
staon.
Note
If the indoor extension and the indoor staon are in the same LAN, the indoor
staon will be displayed in the list. Tap the device or enter the serial No. to link.
Figure 2-5 Indoor Extension Sengs
4. Link related devices and tap Next.
Network Indoor Staon Conguraon Guide
4

Figure 2-6 Related Device
1) Set the linked device's parameters.
Note
If the device is inacve, the system will pop up the dialog to acvate the device.
2) Tap to pop up the Network Sengs page.
3) Edit the network parameters of the door staon manually or enable DHCP to
get the network parameters automacally.
4) Tap OK to save the sengs.
5. Tap Finish to save the sengs.
2.3 Basic Sengs
Basic sengs is required before starng using the indoor staon. It is necessary to
set the indoor staon network, room No., linked devices, device me display, and so
on.
2.3.1 Set Indoor Staon Network Parameters
Network connecon is mandatory for the use of the indoor staon. Set the network
parameters aer acvang the indoor staon. Only when the IP address of the
indoor staon is in the same network segment as other devices, it can work properly
in the same system.
Network Indoor Staon Conguraon Guide
5

Steps
Note
The default IP address of the indoor staon is 192.0.0.64.
Two ways are available for you to set IP address: DHCP, and set IP address manually.
1. Tap Sengs → → to enter the network sengs page.
Note
Enter acvate password as the admin password.
Figure 2-7 Network Sengs
2. Enable DHCP, then the indoor staon can search and get an IP address
automacally.
Note
Skip the following steps if you have enabled DHCP.
3. Set the Local IP, Subnet Mask and Gateway manually.
2.3.2 Set Linked Device IP
Linked network parameters refers to the network parameters of devices (like door
staon, doorphone, main staon, center, etc.), to which the indoor staon is linked.
Linked devices for the indoor staon refers to door staon, center, main staon, and
doorphone.
Network Indoor Staon Conguraon Guide
6

Steps
Note
Here take door staon network sengs as example.
1. Tap Sengs → → to enter the device management page.
Note
Default admin password is the acvaon password.
Figure 2-8 Device Management
2. Tap Main Door Staon to pop up the device informaon dialog.
1) Tap to switch the device type.
2) Edit the IP address of the main door staon.
2.3.3 Set Indoor Staon No.
Indoor staon No. and the indoor extension No. are numbers, which can be dialed
by other devices to call the indoor staon and the indoor extension in an intercom
system. The indoor staon No., is composed of the oor No. and the room No.
The indoor extension No. should be a numeric from 1 to 5.
Up to 5 indoor extensions can be set for 1 indoor staon.
Steps
1. Tap Sengs → → to enter the indoor staon No. sengs page.
Network Indoor Staon Conguraon Guide
7

Note
Default admin password is the acvaon password.
Figure 2-9 Set Indoor Staon No.
2. Congure the indoor staon and indoor extension informaons.
-Select Indoor Staon as Indoor Staon Type. Edit the Room No. and Floor No.
-Select Indoor Extension as Indoor Staon Type. Edit the Room Name and
extensionNo.
2.3.4 Add Camera
Steps
1. Tap Sengs → → to enter the device management page.
Note
Default admin password is the acvaon password.
2. Tap + → Camera to pop up the dialog box.
3. Enter the device name and IP address.
4. Enter the port No. and channel No.
5. Enter the user name and password of the camera.
6. Tap OK to add the camera.
2.3.5 Zone and Alarm Sengs
Network Indoor Staon Conguraon Guide
8

Zone Sengs
You can set the zone type, alarm type and delay me and other parameters of 8
zones.
Before You Start
Tap Sengs → → Preference to enable Alarm funcon.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm funcon rst.
1. Tap Sengs → Zone Sengs to enter the zone sengs page.
Figure 2-10 Zone Sengs
2. Press a zone to pop up the zone eding dialogue box.
3. Set the zone type, alarm type, status of arming status, entering delay, and exing
delay.
4. Tap OK to save the sengs.
Note
●7 zone types are selectable: Panic Buon, Door Magnec, Smoke Detector,
Acve Infrared, Passive Infrared, Gas Detector, and Doorbell.
●3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it's triggered.
Network Indoor Staon Conguraon Guide
9