HIK VISION DS-7600NI-E1/A User manual

Quick Start Guide of All-in-One Network Video Recorder
0
All-in-One Network Video Recorder
Quick Start Guide
UD.6L0202B2085A01

Quick Start Guide of All-in-One Network Video Recorder
1
TABLE OF CONTENTS
NVR Pre-Installation.......................................................................................................................................6
NVR Installation ..............................................................................................................................................6
Sitting on the Horizontal Plane ..................................................................................................................6
Fixing in the Vertical Plane........................................................................................................................8
Front View ...................................................................................................................................................... 11
Rear View……………………………………………………………………………………………………...12
HDD Storage Calculation Chart...................................................................................................................13
Menu Operation.............................................................................................................................................14
Menu Structure.........................................................................................................................................14
Startup and Shutdown..............................................................................................................................14
Setting the Admin Password ....................................................................................................................15
Login and Logout.....................................................................................................................................16
User Login .......................................................................................................................................16
User Logout .....................................................................................................................................16
Live View.................................................................................................................................................17
Adding IP Cameras ..................................................................................................................................17
Recording.................................................................................................................................................19
Instant Recording.............................................................................................................................19
All-day Recording............................................................................................................................19
Playback...................................................................................................................................................19
Backup.....................................................................................................................................................21
Advertising...............................................................................................................................................22
Accessing by Web Browser............................................................................................................................23
Logging in................................................................................................................................................23
Live View.................................................................................................................................................24
Recording.................................................................................................................................................25
Playback...................................................................................................................................................26

All-in-One Network Video Recorder Quick Start Guide
2
Quick Start Guide
COPYRIGHT ©2015 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user
manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated,
Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
This Manual is applicable to All-in-One NVR (Network Video Recorder).
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.

All-in-One Network Video Recorder Quick Start Guide
3
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

All-in-One Network Video Recorder Quick Start Guide
4
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
end-user.
●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
and region. Please refer to technical specifications for detailed information.
●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for
detailed information.
●Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
hazard.
●Please make sure that the plug is firmly connected to the power socket.
●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

All-in-One Network Video Recorder Quick Start Guide
5
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Unit is designed for indoor use only.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Use the device in conjunction with an UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.

All-in-One Network Video Recorder Quick Start Guide
6
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.
This manual is applicable to the model: DS-7600NI-E1/A.
NVR Pre-Installation
The NVR is highly advanced surveillance equipment that should be installed with care. Please take into
consideration the following precautionary steps before installation of the NVR.
1. Keep all liquids away from the NVR.
2. Install the NVR in a well-ventilated and dust-free area.
3. Ensure environmental conditions meet factory specifications.
4. Use brackets for rack mounting.
5. Ensure there is ample room for audio and video cables.
6. When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
7. Ensure the NVR is grounded.
8. Environmental temperature should be within the range of 0 ºC to +50 ºC (32ºF to 122ºF).
9. Environmental humidity should be within the range of 10% to 90%.
NVR Installation
Purpose:
The product is a Network Video Recorder (NVR) as well as a LCD displayer. It can sit on the table or fixed in the
wall. Follow the steps to install the product.
Sitting on the Horizontal Plane
Steps:
1. Insert the bracket to the slot of the pedestal as the direction below. And make the four buckles tightly into the
slot.
2. Insert the combination of bracket and pedestal into the slot of the displayer. Until the circle hole in bracket is
totally matched with the circle bulge of displayer.

All-in-One Network Video Recorder Quick Start Guide
7
3. Lay the device on a horizontal plane.
4. You can adjust the visual angle by holding the pedestal and move the displayer forwards and backwards.
As shown below, the adjustable angle is [-20, 5].

All-in-One Network Video Recorder Quick Start Guide
8
Fixing in the Vertical Plane
Before you start:
Prepare the needed tools: Drill, M5 expansion screw, M4 screw and screwdriver.
Steps:
1. Separate the bracket into two parts by holding the both parts of the bracket and moving the part 1 downwards.
As shown below.
The Part 1 is wide at top and narrow at bottom.

All-in-One Network Video Recorder Quick Start Guide
9
2. Put the part 1 in the wall and use a drill to bore four holes of 8 mm in the wall, according to the four screw
holes in the part1.
3. Insert four M5 expansion screws into the four screw holes in part 1.
4. Fix the part 1 in the wall by using the screwdriver to tight the screws.
5. Inserting four M4 screws into the screw holes of part 2.

All-in-One Network Video Recorder Quick Start Guide
10
6. Connect the part 2 and the displayer by using a screwdriver to tight the screws.
7. Hold the combination of part 2 and displayer and move the combination from top to down to combine it with
part 1 again.

All-in-One Network Video Recorder Quick Start Guide
11
Front View
No.
Icon
Description
1
Press it to switch input source.
In main menu interface, press it to select and enter a sub-menu.
In sub-menu interface, press it to exit the sub-menu.
2
In main menu interface, press it to positioning the cursor to the next item
In sub-menu interface, press it to increase the value of a certain item.
3
In main menu interface, press it to positioning the cursor to the upper item
In sub-menu interface, press it to decrease the value of a certain item.
4
Press it to enter main menu.
In main menu interface, press it exit main menu
In sub-menu interface, press it to positioning the cursor to the next item.
5
Turn on/off the LCD displayer.
6
Universal Serial Bus (USB) interface for external USB device.
7
LCD power indicator and IR (Infrared Radiation) receiver.

All-in-One Network Video Recorder Quick Start Guide
12
Rear View
No.
Name
Description
1
AOUT-VGA
Audio output interface for NVR VGA signal.
2
VGA OUT
Video output interface for NVR VGA signal.
3
LAN
Network interface.
4
Universal Serial Bus (USB) interface for external USB device.
5
AIN-VGA
Audio input interface for NVR VGA signal.
6
MIC interface for audio output.
7
VGA IN
Video input for VGA input.
8
HDMI IN
Video input for HDMI input.
9
12V
12V Power supply.
10
Loudspeaker
Loudspeaker for audio output.

All-in-One Network Video Recorder Quick Start Guide
13
HDD Storage Calculation Chart
The following chart shows an estimation of storage space used based on recording at one channel for an hour at a
fixed bit rate.
Bit Rate
Storage Used
96K
42M
128K
56M
160K
70M
192K
84M
224K
98M
256K
112M
320K
140M
384K
168M
448K
196M
512K
225M
640K
281M
768K
337M
896K
393M
1024K
450M
1280K
562M
1536K
675M
1792K
787M
2048K
900M
4096K
1.8G
8192K
3.6G
16384K
7.2G
Please note that supplied values for storage space used is just for reference. The storage values in the chart are
estimated by formulas and may have some deviation from actual value.

All-in-One Network Video Recorder Quick Start Guide
14
Menu Operation
Menu Structure
Menu
Export Manual HDD Camera Maintenance Shutdown Record Configuration
Playback
Normal Record General Schedule Camera General System Info Logout
Event Advanced Parameters OSD Network Log
Information Shutdown
Advanced Image Import/
Export Reboot
Holiday PTZ Upgrade
Motion
Live View
Default
Privacy
Mask
Exceptions
Net Detect
Video
Tampering
User
Video Loss
HDD
Detect
Alarm
VCA
Normal
Event
Tag
Smart
Sub-
periods
External
File
VCA
Search
People
Counting
Heat Map Alarm
Advertising
Files Import
Advertising
Preview
Advanced
Configuration
Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your NVR:
Step:
Plug the power supply into the electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply
(UPS) be used in conjunction with the device.
After the device starting up, the wizard will guide you through the initial settings, including modifying password,
date and time settings, network settings, HDD initializing, and recording.
To shut down the NVR:
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Select the Shutdown button.
3. Click the Yes button.

All-in-One Network Video Recorder Quick Start Guide
15
4. Turn off the power switch on the rear panel when the attention pops up.
Setting the Admin Password
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No operation is allowed
before activation. You can also activate the device via Web Browser, SADP or Client Software.
Steps:
1. Input the same password in the text field of Create New Password and Confirm New Password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
2. Click OK to save the password and activate the device.
For the old version device, if you update it to the new version, the following dialog box will pop up once the
device starts up. You can click YES and follow the wizard to set a strong password.

All-in-One Network Video Recorder Quick Start Guide
16
Login and Logout
User Login
Purpose:
If NVR has logged out, you must login the device before operating the menu and other functions.
Steps:
1. Select the User Name in the dropdown list.
2. Input Password.
3. Click OK to log in.
The device gets locked for 60 seconds if the admin user performs 7 failed password attempts (5 attempts for the
guest/operator).
User Logout
Purpose:
After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter
user name and password tog in again.
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Click Logout.
After you have logged out the system, menu operation on the screen is invalid. It is required to input a user name
and password to unlock the system.

All-in-One Network Video Recorder Quick Start Guide
17
Live View
Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the upper-right corner of the screen for each channel, showing the status
of the record and alarm in the channel, so that you can find problems as soon as possible.
Alarm (video loss, tampering, motion detection or sensor alarm)
Record (manual record, continuous record, motion detection or alarm triggered record)
Alarm & Record
Event/Exception (event and exception information, appears at the lower-left corner of the screen.)
Adding IP Cameras
You should add and configure the online IP cameras to enable the live view and recording function.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the User Manual for activating the inactive IP camera.
You can select one of the following three options to add the IP camera.
IP camera in the same network segment with NVR will be added automatically.
Steps:
1. Right-click the mouse when you in the live view mode to show the right-click menu.
2. Select Add IP Camera in the pop-up menu to enter the IP Camera Management interface.

All-in-One Network Video Recorder Quick Start Guide
18
3. The online cameras with same network segment will be displayed in the camera list. Click the button to
add the camera.
The added camera is marked in white while the camera has not been added is marked in yellow.
Explanation of the icons
Icon
Explanation
Icon
Explanation
Edit basic parameters of the camera
Add the detected IP camera.
The camera is connected.
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Delete the IP camera
Advanced settings of the camera.
Upgrade the connected IP camera.
Security
Show the security status of the camera
to be active/inactive or the password
strength (strong/medium/weak/risk)
4. To add other IP cameras:
1) Click the Custom Adding button to pop up the Add IP Camera (Custom) interface.
2) You can edit the IP address, Protocol, Management Port, User Name and Admin Password of the IP

All-in-One Network Video Recorder Quick Start Guide
19
camera to be added.
3) Click Add to add the camera.
4) (For the encoders with multiple channels only) check the checkbox of Channel No. in the pop-up window,
as shown in the following figure, and click OK to finish adding.
Recording
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record.
And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.
Instant Recording
On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the
window when you click on it.
Click the icon to enable the record, and the icon turns to . And click icon to disable the record,
then the icon turns to .
All-day Recording
Steps:
1. On the live view window, right lick the window and move the cursor to the Start Recording option, and
select Continuous Record or Motion Detection Record on your demand.
2. And click the Yes button in the popup Attention message box to confirm the settings.
Then all the channels will start to record in the selected mode.
Playback
Play back the record files of a specific channel in the live view menu. Channel switch is supported.
Option 1:
Choose a channel under live view using the mouse and click the button in the shortcut operation menu.
Only record files recorded during the past five minutes on this channel will be played back.