Hirschmann CSR 3402 QAM User manual

User’s Manual
DIGITAL CABLE NETWORK TERMINAL
WITH COMMON INTERFACE
CSR 3402 QAM
MENU OK

CONTENTS
2.
3. Remote Control Unit (RCU) ---------------------------------------------------- 4
4. Getting Started --------------------------------------------------------------------- 5
5. Operation and Menu Program ------------------------------------------------- 7
6. Specifications ---------------------------------------------------------------------- 16
Front & Rear View ---------------------------------------------------------------- 3
1. Features ----------------------------------------------------------------------------- 2
1
Trade Mark of the DVB Digital Video Broadcasting Project (1700)
AC power switch is on the rear panel of the receiver.
AC power switch is on the rear panel of the receiver.

1. Features
2
1. MPEG 2 Video(MP@ML)
2. MPEG 1 Audio Layer 1, Layer 2
3. MPEG-2 Digital & Fully DVB Compliant
4. Capable of Interfacing the CAMs of DVB Common Interface Standard
5. Automatic Channel Set-up for CATV network
6. Capable of Auto scanning the frequency for QPSK to QAM Conversion system
7. QAM demodulation
8. On-Screen Display with 256-Color Full Resolution
9. LD Quality Video, CD Quality Audio
10. Plug & Play Installation
11. Parental lock
12. RS232C port for additional information service and updating IRD control software
13. 4-digit 7-segment LEDs on the front panel displays channel information
14. Displays Local Time on the front panel, when it is on stand-by mode
15. Power recovery function
16. 64-Step Volume control
17. Favorite channel function
18. User friendly OSG menu with full function
19. IR remote control
20. Last channel memory function
21. Variable aspect ratio (4:3, 16:9) with Pan vector
22. EPG for on-screen channel information
23. Receiver-to-Receiver function for operating program and data transfer.

MENU OK
VIDEO
AUDIO
ANT IN
TV/VCR
FRONT PANEL
2. Front & Rear View
REAR PANEL
3
AC Power
Cord Cable Input
Loop Through
Note) All cables used for connecting the receiver should be well-shielded type cable.
2 CAM Slots
AC power switch

3. Remote Control Unit (RCU)
0
9
Switches the Receiver ON/OFF
Switches the sound ON/OFF.
Direct choice of TV / Radio channel and other commands by
numeric keys.
When you want to see the main menu or
return to the previous menu.
Return to the current video viewing at any time
Selection of program, highlighted line or parameter value.
Also, you can see TV/Radio channel list while watching TV
or listening to Radio channel.
Channel Up
Channel Down
Volume Up (Page Up )
Volume Down (Page Down)
Switches between TV/Radio mode.
Select the audio language or the sound track you want
among data to be transmitted from the satellite.
To return to current channel, press or EXIT.
4
Shows your favorite channels edited.
(Before the operation, FAV edition should be done
in “Edit TV channel” menu.)
Shows the list of available channels.
(Only available when provided by the broadcaster)
Shows program information provided by the broadcaster
Shows Subtitle menu to select the subtitle language.
Shows a thumb nail representation of the current channel in the
“Edit TV Channel”, “Parental Lock” and “TV Guide”.

VIDEO
AUDIO
ANT IN
TV/VCR
VIDEO
AUDIO
ANT IN
TV/VCR
4. Getting Started
Connect the coaxial cable from the Cable socket into ANT IN socket of the receiver.
(Connector should be adapted finger-tight.)
Please do NOT PLUG the receiver into Mains until you finish making all connections to the unit.
5
Receiver to TV with SCART
Connect the “TV” SCART on the receiver with the SCART of TV.
Receiver to VCR, TV with SCART
Connect the “TV” SCART on the receiver with the SCART of TV.
Connect the “VCR” SCART on the receiver with the SCART of VCR.
RF Connector
RF Connector RF Connector

To watch payable program channels, a CI CA Module and a smart card of specific
service provider are necessary. You may ask for these to the shop which you had
purchased the receiver.
In case you subscribed to more than one service provider, you should insert proper
CI CA Module with matching smart card to get access to each bouquet. This
receiver shall accept two CI CA Modules with two smart cards at the same time.
If any CI CA Module with smart card is not inserted in the receiver, only free
(FTA; free-to-air) programs are available.
Here’s how to get access to the pay channels after your subscription to the provider
and your purchase of the CI CA Module.
Smart Card and CI CA Module
CI CA Module (Common Interface Conditional Access Module)
Smart Card
This side into the slot of the receiver
6

5. Operation and Menu Program
Press on the remote control unit (RCU ).
(or press /I on the front panel of the receiver)
Press to display Main Menu on the screen.
The initial code is set as [0000] and you can change it (see “Change PIN code” in page 10).
Above menu for inputting the PIN code is displayed only when the Installation & Edit Lock is set as [ON].
Main Menu
Installation
Select menu using channel up/down keys or numeric keys.
Please note that is always a confirmation of your selection.
To return to the previous menu, press MENU.
7
Installation Lock
Enter PIN code
[ ? ? ? ? ]
Installation
5. A/V Output Setting
1. Channel Setup
2. QPSK-QAM Setting
3. Language Setting
4. Local Time Setting
Channel Setup
Main Menu
6. Installation
5. Edit
1. TV Channels
2. Radio Channels
3. Parental Control
4. Timer
7. Common Interface
Main Menu
6. Installation
5. Edit
1. TV Channels
2. Radio Channels
3. Parental Control
4. Timer
7. Common Interface
6. Reset(Factory Default)
Channel Setup
Symbol Rate
Modulation 64
Search Type CATV Search
Start Search(Press OK)
0/22kHz Control Off
0.000
Frequency 0.0
Recommended search for first installation,
no further entries necessary
To return to the previous Menu, press MENU
There are 3 kinds of search type.
1) CATV search
2) Manual search
3) QPSK-to-QAM search
You can select the search type by pressing ,key on
the Search Type bar.
CATV Search
By selecting this search type, the receiver will search
the TV and Radio channels digitally transmitted
from the cable network automatically .
Then, press OK button on the “Start Search” bar, the search will be started. Refer the Channel Search menu on the
page No. 8.

8
Channel Setup
Symbol Rate
Modulation 64
Search Type QPSK-to-QAM Search
Start Search(Press OK)
0/22kHz Control Off
0.000
Frequency 0.0
Free parameter configuration,
long search time possible.
To return to the previous Menu, press MENU
Channel Setup
Symbol Rate
Modulation 64
Search Type Manual Search
Start Search(Press OK)
Off
0.000
Frequency 0.0
Search for Single Cable Network
Symbol Rate, QAM Modulation and Cable Network
center frequency have to be entered
To return to the previous Menu, press MENU
Signal Quality 55%
QPSK-to-QAM Setting
Stop Frequency
Symbol Rate1 6.900
Off
858.0
Start Frequency 114.0
To return to the previous Menu, press MENU
Symbol Rate2 6.875
Symbol Rate3 6.111
Symbol Rate4 0.000
Symbol Rate5 0.000
Modulation 16 32 64 128 256
Channel Search
TV Channels Radio Channels
Channel Searching Status
0% 50% 100%
154. CARSAT
155. Beta BC
156. BD1
157. TAQUILLA 6
158. TAQUILLA 7
159. TAQUILLA 8
160. ESTILO
153. ARTE 41. MUSICALS
42. REQQAE
43. COUNTRY
44. NEW CNTRY
45. LATIN
46. KL. SYMPHON
47. KLASSIK
48. OPER
Index Frequency Symbol Rate Modulation
1 410 6.900 64
Manual Search
By selecting this search type, you can search the
channels by inputting the parameter for Frequency,
Symbol Rate and Modulation type.
After inputting the parameters, press OK button on the
“Start Search” bar, the search will be started. Refer the
Channel Search menu
* In order to use this Search Type, you need the exact
information of the channels.
QPSK-to-QAM Search
To search the channels by this type, first you should input the parameters on the QPSK-to-QAM Setting menu.
Then, select QPSK-to-QAM search on the “Search Type” bar with ,keys.
After selecting the search type, and press the
OK button. Then, the Channel Search will be
started.

9
Language Setting
English
English
Main Audio Language
2nd Audio Language English
Menu Language
To return to the previous Menu, press MENU
Subtitle Language English
Language Setting
You can select the desired language for the OSG (On-
Screen Graphics) display using the , keys when
the “Menu Language” option is selected. Similarly
you can selected a different audio channel when the
“Audio Language” option is selected. This option
allows you to select a different language to listen to if
supported.
Subtitle
None
Ita
Eng
Subtitle
Select “Subtitle language” at “Select Language Setting” menu.
While watching your wanted channel, the subtitle shall be displayed only when
the selected subtitling language is provided by the broadcaster.
To check if subtitle language is available, press “ ” key on the remote control
unit, then all the available subtitle languages will be shown on the screen.
Local Time Setting
* If GMT is provided by the broadcaster, you may get the time using the GMT provided by broadcaster (or)
you may get your own time. (Please be aware that the GMT information provided by the broadcaster may
not be correct sometimes.)
A) If GMT is provided, select “Yes” for GMT usage, the area of the selected place(time zone) and
summer time On/Off. You can adjust the time from +59 to -59 minutes by using the Time offset.
B) If GMT is not provided or you want to set the time yourself, select “No” for GMT usage, the area
of the selected place(time zone) and set your local time using volume up/down keys ( , ).
Local Time Setting
[ +00 ]
Time offset
[ Off ]
GMT usage [ Yes ]
Selected time zone
[ London ]
Summer time
Local Time = 01 : 27
Local Time Setting
Minute [ 27 ]
Hour [ 01 ]
GMT usage [ No ]
Selected time zone
[ London ]
Time adjustment
Local Time = 01 : 27

10
Please select your TV format.
4:3 for normal screen TV
16:9 for wide screen TV
You can select OSG viewing time of the information
about the current channel & program among
2/3/4/5/6/8/10secs by using volume up/down keys.
A/V Output Setting
Sub.backg. Select ‘On’ for Subtitle background on TV
(Subtitle background).
A/V Output Setting
Aspect [ 4:3 ]
Banner [ 3sec ]
Sub.backg. [ On ]
Parental Control
[ 0000 ]
Preprogrammed PIN (Personal Identification Number) code is set as [0000].
If you want to change it, please follow the procedure shown above.
If Receiver Lock is set as [On], you have to input the correct code to operate
the Receiver.
Change PIN Code
Receiver Lock
Change PIN Code
[ ? ? ? ? ]
Verify PIN code
Current PIN code
[ ? ? ? ? ]
New PIN code
[ ? ? ? ? ]
Parental Control
Enter PIN code
[ ? ? ? ? ]
[ On ]
5. Installation & Edit Lock
[ Off ]
1. Change PIN Code
2. TV Channel Lock
3. Radio Channel Lock
4. Receiver Lock
Parental Control
You can not enter directly into Installation menu and Edit menu when
Installation & Edit Lock is set as [On].
Installation &
Edit Lock

8. REE
TV Channel Lock
Press to lock / unlock the selected channel.
Locked channels will be skipped when scrolling
through channels.
Note) The color of the highlighted bar turns to
Grey when it is on a locked channel.
You can see the current channel display on
this menu. If you want to view the current
TV channel, press “VIEW”keyonthe
remote control.
TV Channel Lock
TV Channels
To return to the previous Menu, press MENU
SMATV
Channel Unlocked
33. PARIS PREMIERE
34. VOYAGE
36. LC I
37. Canal J
38. DF1 Info-Kanal
39. Star Kino
35. CONTACT TV
40. CNN
11
TV Channels
Radio Channels
TV Channels
Radio Channels
You can select the channel you would like to watch either
by pressing the numeric keys for the channel number or by
moving the highlighted bar to the channel of your choice
using the , keys. Press the OK key to select the
channel.
* Press the ,keys to move one page up or down.
+ : to High channel, - : to Low channel
You can select the channel you would like to watch either
by pressing the numeric keys for the channel number or by
moving the highlighted bar to the channel of your choice
using the , keys. Press the OK key to select the
channel.
* Press the ,keys to move one page up or down.
+ : to High channel, - : to Low channel
Timer
Turn on [ Off ]
[ - - : - - ]
[ - - : - - ]
[ Off ]
Turn off [ Off ]
Sleep time (Minute)
Local Time = - - : - -
Timer
You can reserve the Turn On, Turn Off time of the receiver
and sleep time on this menu
11. Paris Premere
12. Voyage
13. Contact TV
14 .LC I
15. Canal J
16. DF 1 Info-Kanal
17. Star Kino
18. CNN
11. Hit Liste
12. Blues
13. Classic Rock
14. Soft Rock
15. Generation Lock
16. Love songs
17. Dance
18. REE

Edit
You cannot enter this menu if the Installation & Edit Lock is [ON].
The initial code is set as [0000] and you can change it (see “Change
PIN code” in page 10).
Edit
4. Edit Satellite
1. Edit TV Channel
2. Edit Radio Channel
3. Edit Transponder
Edit TV Channel
You can move to the channel that you want to edit by
using the , keys.
Also you can move to the highlighted bar directly by
inputting the channel number.
Press the OK key to select the channel you want to edit,
and then you can move the channel to the position you
want or delete it. If you want to view the current TV
channel, press “VIEW” key on the remote control.
Edit TV Channel
TV Channels
[ Status ]
¾½ OK FAV VIEW
Delete Cancel Select Favorite CH View
To return to the previous Menu, press MENU
SAMTV
11. Paris Premere
12. Voyage
13. Contact TV
14 .LC I
15. Canal J
16. DF 1 Info-Kanal
17. Star Kino
18. CNN
12
You can create a group of up to 96 channels in the “Edit TV Channel”or“
Edit Radio Channel”menu.
To include a channel in the FAV list, select a channel and press the blue key on the remote control.
To select a favorite channel from the FAV list, press the FAV key.
To view a thumb nail representation of the currently selected channel, press the VIEW key on the remote
control.
FAV Channels
Edit Radio Channel Edit Radio Channel
Radio Channels
[ Status ]
¾½ OK FAV
Delete Cancel Select Favorite
To return to the previous Menu, press MENU
SMATV
11. Hit Liste
12. Blues
13. Classic Rock
14. Soft Rock
15. Generation Lock
16. Love songs
17. Dance
18. REE
Use the same procedure for the Radio
Channels as used for editing the TV Channels
as above.

Edit CH name & PID
To edit a channel name(add, change) and PID
(Packet Identifier), you should use this menu.
On the channel name bar, you can add or change the
channel name by pressing the OK key. If you press OK
key, the Graphic Keyboard will be displayed. After add
or change the channel name, press OK key on the
SAVE button on the Graphic Keyboard. Also, you can
change the PID number on this menu.
Edit CH name & PID
To return to the previous Menu, press MENU
ASTRA
Erase Cable Network
To delete a Cable Network, press the ¾key when the
highlighted bar is located at the cable network you
want to delete.
Erase Cable Network
NetworkList
¾
Delete
To return to the previous Menu, press MENU
13
Network to be deleted
Channel List
Frequency 114.0
SR//Modulation 0.000/64
Channel Name ????????
Video PID 0
Audio PID 0
PCR PID Auto
. . No Channel . .
1. 114.0 MHz
2. 122.0 MHz
3. 130.0 MHz
4. 138.0 MHz
5. 146.0 MHz
6. 154.0 MHz
7. 162.0 MHz
8. 170.0 MHz
SMATV
SMATV
“Common Interface” menu provides information and
additional menu about the CI CA Module inserted in the
receiver. This information may vary depending on the
information by the service provider. Please see the
documentation delivered together with your CI CA
Module.
Maximum two CI CA Modules are acceptable with this
receiver.
Common Interface
To return to the previous Menu, press MENU
Slot 1 : Module not installed
Slot 2 : Module not installed
Common Interface

14
TV Guide
If more than one audio channel is provided by the
broadcaster on a specific channel, you can activate the
audio mode display by pressing the key.
L Audio R
1
L R
L Audio R
ALT Audio
TV Guide
1. Nordic TNT The Lone Star 19:15 20:59
2. Nordic Cartoon Godzila 20:30 21:00
Now
3. Kanal 5 Oprah Wintrey 20:15 21:10
4. Sky News (Cable Money 20:30 21:00
5. Discovery Weapons Of War 20:00 21:00
6. Animal Planet Animal doctor 20:30 21:00
7. Fox Kids The Puzzle Place 20:30 21:00
8. RAI1 Linea verde - In 20:19 20:55
TV/Radio , i
Radio Next more Info
Current Time = 20 : 55
While watching or listening to any channel and you want to know more information regarding the program
shown, press the GUIDE key on the remote control to display the “TV Guide” or the “Radio Guide”. This
information may be provided by the broadcaster. You can move to another channel by pressing the , keys.
Please refer to the function of the keys.
1) (TV/Radio) key : Switches the “TV Guide”andthe“
Radio Guide” by pressing this key.
2) ,(NowNext) key : Switches the guides of “Now” and “Next”
3) I (Info) key : Shows detailed information of the selected channel.
TV Guide
MENU OK
Back Select
RAI1
natura : Linea verde - In diretta della natura
Un programma di Sandro Vannucci a cura di
Gian Stefano Spoto produttore esecutivo
Gianpiero Ricci
20:19 20:55

Reset (Factory Default)
If you want to reset all the data edited, press OK twice.
Reset (Factory Default)
*CAUTION : All the information of satellite and
transponder to be edited by the user
will be initialized by this process.
To return to the previous Menu, press MENU
* If you want Factory Reset, press OK.
15

6. Specifications
16
1. Tuner & Channel
Input Connector 1 x IEC female
Loop through Connector 1 x IEC male
Frequency Range 47MHz To 862MHz
Waveform QAM : 16, 32, 64, 128, 256
Symbol rate 1 ~ 7MS/s
Input signal level 47dB uV ~ 75dB uV for each channel
Input imperdance 75 ohms nominal
Loop through out imperdance 75 ohms nominal
Loop through gain 0 dB typ.
Center frequency 36.15MHz nominal
Bandwidth 8MHz typ.
2. MPEG Transport Stream A/V Decoding
Transport Stream MPEG-2 ISO/IEC 13818
Transport Stream Specification
Profile & Level MPEG-2 MP@ML
Input T/S Data Rate 90Mbit/S Max.
Aspect Ratio 4:3, 16:9 with Pan vector
Video Resolution 720 x 576(PAL), 720 x 480(NTSC)
Audio Decoding MPEG-1 Audio Layer 1,2, Musicam
Audio Mode Stereo, Dual Channel, Joint Stereo, Mono
Sampling Rate 32, 44.1 and 48KHz
3. Memory
Flash Memory up to 2Mbytes
Program DRAM 8 Mbytes
EEPROM 2 Kbytes
4. A/V & Data In/Out
SCART TV x 1, VCR x 1
RGB Video Out TV Scart
CVBS Video Out 2 x Scart socket(TV, VCR) ,RCA x1
Analog Audio Out 2 x Scart socket(TV, VCR) ,RCA x 2(L,R)
Resolution 16bit DAC
Output Level 2Vrms Max.
Volume & Mute Control
Data Interface RS232C, BAUD Rate 115200 Max., 9Pin D-SUB

17
5. PCMCIA
Number of Slot 2
Type I, II DVB Common Interface Standard
6. Power Supply
AC Power Switch Push lock type(toggle)
Input Voltage AC90 – 240V, 50/60Hz
Type Linear PWM
Power Consumption 40W Max.(Below 7W Max. For Standby Mode)
Protection Separate Internal Fuse and Chassis
Grounding
The Input shall have lighting or Electric Shock
Protection.
7. Physical Specification
Size(W x H x D) 320mm x 60mm x 240mm
Weight about 2.0 Kg
8. Environment
Operating Temperature +5 C +50 C
Storage Temperature 40 C +65 C