Hirschmann MICE MS20 User manual

MICE MS20/MS30
Release 2.0 02/06 Technical support [email protected]
User Manual
Installation
Industrial ETHERNET Switch MICE
MS20/MS30
.
MICE MS20 MICE MS30

Thenamingofcopyrightedtrademarksinthismanual,evenwhennot specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2006 Hirschmann Automation and Control GmbH
Manualsandsoftwareareprotectedby copyright.Allrightsreserved.Thecopying,reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use.
The performance features described here are binding only if they have been expressly
guaranteed in the contract. This publication has been created by Hirschmann Automation and
Control GmbH according to the best of our knowledge. Hirschmann reserves the right to change
the contents of this manual without prior notice. Hirschmann can give no guarantee in respect
of the correctness or accuracy of the details in this publication.
Hirschmann can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
Printed in Germany (9.2.06)
Hirschmann Automation and Control GmbH
Stuttgarter Straße 45-51
72654 Neckartenzlingen
Tel. [phone] 530-001-02-0206

MS20/MS30
Release 2.0 02/06 3
Content
Safety instructions 4
About this manual 9
Legend 9
1 Device description 10
1.1 Description of the device variants 11
1.1.1 MS20-... /MS30-... combination options 13
1.1.2 Number of ports and media 14
1.1.3 Media modules 16
1.1.4 MB - 2T expansion module 20
1.1.5 SFP module 20
2 Assembly and startup procedure 21
2.1 Device installation 21
2.1.1 Unpacking and checking 21
2.1.2 Assembling the media modules 21
2.1.3 Filling out and attaching the labels 22
2.1.4 Assembling the SFP modules 23
2.1.5 Adjusting the DIP switch settings on the basic module 23
2.1.6 Adjusting the DIP switch settings on the
MICE MM3-2AUI media module (if existent) 24
2.1.7 Terminal block for supply voltage and signal contact 25
2.1.8 Connecting the terminal blocks, startup procedure 26
2.1.9 Assembling the device on the ISO/DIN rail, grounding 26
2.1.10Connecting the data lines 27
2.1.11Assembling the MB - 2T expansion module 29
2.1.12Define the meaning of the display LEDs 29
2.2 Displays 30
2.3 Carrying out basic settings 34
2.4 Disassembling 36
3 Technical data 37
Further support 43

4MS20/MS30
Release 2.0 02/06
Safety instructions
This manual contains instructions which must be observed to ensure your
own personal safety and to avoid damage to devices and machinery.
UCertified usage
Please observe the following: The device may only be employed for the
purposes described in the catalog and technical description, and only in
conjunction with external devices and components recommended or
approved by Hirschmann. The product can only be operated correctly
and safely if it is transported, stored, installed and assembled properly
and correctly. Furthermore, it must be operated and serviced carefully.
USupply voltage
The devices are designed for operation with a safety extra-low
voltage.Thus, they may only be connected to the supply voltage connec-
tions and to the signal contact with PELV circuits or alternatively SELV
circuits with the voltage restrictions in accordance with IEC/EN 60950.
The supply voltage is electrically isolated from the housing.
VUse only undamaged parts!
VRelevant for North America:
The subject unit is to be suppplied by a Class 2 power source comp-
lyingwiththerequirementsoftheNationalElectrical Code,table11(b).
If power is redundant supplied (two individual power sources) the po-
wer sources together should comply with the requirements of the Na-
tional Electrical Code, table 11 (b).
VRelevant for North America:
Use 60/75°C or 75°C copper(CU)wire only.
VRelevant for North America
for devices certified for hazardous locations:
Power, input and output (I/O) wiring must be in accordance with Class
I, Division 2 wiring methods [Article 501-4(b) of the National Electrical
Code, NFPA 70] and in accordance with the authority having
jurisdiction.
UShielding ground
The shielding ground of the connectable twisted pairs lines is connected
to the front panel as a conductor.
VBeware of possible short circuits when connecting a cable section
with conductive shielding braiding.

MS20/MS30
Release 2.0 02/06 5
UHousing
Only technicians authorized by Hirschmann are permitted to open the
housing.
The lower covering panel of the MICE housing is grounded by the DIN
rail and, as an option, by the separate ground screw.
The switch basic module forms an inseparable unity. By removing the
display and connecting parts, you risk the damage of the switch basic
module.
VMake sure that the electrical installation meets local or nationally ap-
plicable safety regulations.
VThe ventilation slits must not be covered to ensure free air circulation.
VThe distance to the ventilation slots of the housing has to be a mini-
mum of 10 cm.
VNever insert pointed objects (thin screwdrivers, wires, etc.) into the in-
side of the subrack! Failure to observe this point may result in injuries
caused by electric shocks.
VThe device has to be mounted in an upright position (see Fig. 13).
VIf installed in a living area or office environment, the device must be
operated exclusively in switch cabinets with fire protection characteri-
stics according to EN 60950.
UEnvironment
The device may only be operated in the listed maximum surrounding air
temperature range at the listed relative air humidity range (non-conden-
sing).
VThe installation location is to be selected so as to ensure compliance
with the climatic limits listed in the Technical Data.
VTo be used in a Pollution Degree listed in the Technical Data.
UQualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and ope-
ration of this product and are appropriately qualified for their job. This
includes, for example, those persons who have been:
Dtrained or directed or authorized to switch on and off, to ground and to
labelpowercircuitsand devices or systems in accordancewithcurrent
safety engineering standards;
Dtrainedor directed inthe care and use ofappropriate safetyequipment
in accordance with the current standards of safety engineering;
Dtrained in providing first aid.

6MS20/MS30
Release 2.0 02/06
UGeneral Safety Instructions
This device is electrically operated. Adhere strictly to the safety require-
ments relating to voltages applied to the device as described in the ope-
rating instructions!
Failure to observe the information given in the warnings could result in
serious injury and/or major damage.
VOnly personnel that have received appropriate training should operate
this device or work in its immediate vicinity. The personnel must be ful-
ly familiar with all of the warnings and maintenance measures in these
operating instructions.
VCorrect transport, storage, and assembly as well as careful operation
and maintenance are essential in ensuring safe and reliable operation
of this device.
VOnly use undamaged parts!
VThese products are only to be used in the manner indicated in this ver-
sion of the manual.
VAny work that may have to be performed on the electrical installation
should be performed by fully qualified technicians only.
Warning!
LED- or LASER components according to IEC 60825-1 (2001):
CLASS 1 LASER PRODUCT.
LIGHT EMITTING DIODE - CLASS 1 LED PRODUCT.
Warning (MM2 - 2FXP4, MM3 - 4FXP4)
LED LIGHT
DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS (e.g. lens, microscope).
Failure to observe this warning within a distance of 100 mm
can endanger your eyes. Light is emitted from the optical connections or
from the ends of the optical fibers that are connected to them. Light Emit-
ting Diode CLASS 2M, Wave length 650 nm, Power <2 mW, according to
IEC/CEI 60825-1:2003-10.
UNational and international safety regulations
VMake sure that the electrical installation meets local or nationally ap-
plicable safety regulations.

MS20/MS30
Release 2.0 02/06 7
UESD guidelines (MM2 - 2FXP4, MM3 - 4FXP4)
The media modules MM2-2FXP4 and MM3-4FXP4 contain components
highly sensitive to electrostatic fields. These components can be easily
destroyed or have their lives shortened by an electrical field or by a
discharge caused by touching the contacts. You can find more informa-
tion about devices vulnerable to electrostatic fields in DIN EN 61340-5-1
(2001-08) and DIN EN 61340-5-2 (2002-01).
UNote on the CE marking
The devices comply with the regulations contained in the following
European directives:
89/336/EEC
Directive of the council for standardizing the regulations of member
states on electromagnetic compatibility (changed by RL 91/263/EEC, 92/
31/EEC and 93/68/EEC).
In accordance with the above-named EU directives, the EU conformity
declaration will be at the disposal of the relevant authorities at the follo-
wing address:
Hirschmann Automation and Control GmbH
Stuttgarter Straße 45-51
D-72654 Neckartenzlingen
Germany
Phone ++49 7127 14 1480
The product can be used in living areas (living area, place of business,
small business) and in industrial areas.
DInterference immunity: EN 61000-6-2:2001
DEmitted interference: EN 55022:1998 + A1 2000 + A2 2003 Class A
Warning!
This is a class A device. This device can cause interference in living
areas, and in this case the operator may be required to take appropriate
measures.
The assembly guidelines provided in these instructions must be strictly
adhered to in order to observe the EMC value limits.

8MS20/MS30
Release 2.0 02/06
UFCC note:
Appropriate testing has established that this device fulfills the require-
ments of a class A digital device in line with part 15 of the FCC
regulations.
These requirements are designed to provide sufficient protection against
interference where the device is being used in a business environment.
The device creates and uses high frequencies and can radiate same,
and if it is not installed and used in accordance with this operating
manual, it can cause radio transmission interference. The use of this
device in a living area can also cause interference, and in this case the
user is obliged to cover the costs of removing the interference.
URecycling note:
After usage, this product must be disposed of properly as electronic
waste in accordance with the current disposal regulations of your county
/ state / country.

MS20/MS30
Release 2.0 02/06 9
About this manual
The following manuals are included as PDF files on the enclosed CD ROM:
DUser manual “Installation”
DUser manual “Basic configuration”
DUser manual “Redundancy configuration”
DReference manual “Web-based Interface” and
DReference manual “Command Line Interface”
If you use Network Management Software HiVision you have further
opportunities to:
Dhave an event logbook.
Dconfigure the “System Location” and “System Name”.
Dconfigure the network address range and SNMP parameters.
Dsave the configuration on the Switch.
Dsimultaneous configuration of several Switches.
Dconfigure the relevant ports to be displayed red if there is no link state.
Legend
The commendations used in this manual have the following meanings:
DListing
VWork step
USubheading

10 MS20/MS30
Release 2.0 02/06
1 Device description
The MS20/MS30 devices consist of a switch with media modules that can be
plugged into it. They allow you to construct switched industrial ETHERNET
networks that conform to the IEEE 802. and 802.3u standards using copper
wires or optical fibers in a bus or ring topology. You can connect terminal de-
vices and other infrastructure components via twisted pair cables, multi-
mode LWL and single-mode LWL. The twisted pair ports support autocross-
ing, autonegotiation and autopolarity.
The MS20/MS30 devices provide you with a range of switch variants. You
cansetupyourswitchtomeetyour individualrequirementswithregardtothe
transmission media type, the number of 10/100 Mbit ports you want (8, 16 or
24), the number of 1000 Mbit ports (up to 2), the temperature range, voltage
range, certificates and software variant.
The MS20/MS30 devices are modular network components. They are de-
signed for the special requirements of industrial automation. They meet the
relevant industry standards, provide very high operational reliability, even un-
der extreme conditions, and also long-term reliability and flexibility. The de-
vices operate without fans and have a redundant voltage supply. The
switches are very quickly mounted by snapping them onto a hat rail, which
also automatically contacts the function ground.
The HIPER-Ring redundancy concept enables you to quickly carry out a re-
configuration, and also a simple configuration with only one additional con-
nection. The diagnosis display and the display of the operating parameters
and the large label areas provide a quick overview.
It can be easily managed via a Web browser, via Telnet, with a management
software product (such as F) or locally on the switch (V.24 interface).
Basic module
Media module or
slot for media module, No. 1234 1 2345
MS20 MS30

MS20/MS30
Release 2.0 02/06 11
Depending on the software you choose, the MS20/MS30 devices provide
you with a large range of functions:
DRedundancy functions
(Rapid Spanning Tree, Redundant Ring Structure, HIPER-Ring,
Redundant Coupling, Link Aggregation, Redundant Power Supply)
DProtection from unauthorized access
DSynchronized system time in the network
DNetwork load control
DFunction diagnosis
DDiagnostics (hardware self-testing)
DReset
DPriority
DVLAN
DTopology recognition
DWeb-based interface
DCommand Line Interface - CLI
DSNMP
D802.1x port authentication
DReal Time Clock (Professional software variant)
The addition, to the MS20/MS30 MICE range, of the RS20/RS30 Open Rail
range of switches, the MACH range of backbone switches, the BAT wireless
transmission system, the EAGLE security system, and products for the LION
control room, provides continuous communication across all levels of the
company.
1.1 Description of the device variants
The industrial ETHERNET series MICE (Modular Industrial Communication
Equipment)consistsofa basicswitchmoduleandthemediamodules.These
devices can be managed. A basic module contains all the functions of this
industrial Gerät, with the exception of the interfaces to the LAN that is
connected. Pluggable media modules provide these interfaces. They differ
with regard to the number of interfaces and the media type for connecting
segments. An expansion module enables you to add 2 slots for media
modules to the basic module.
For the sake of simplicity, the basic switch module with various plugged in
media modules will be referred to as MICE in this document.
DThe MS20-... device variants aremodularswitches withup to8, 16or 24 *
10/100 Mbit Ethernet ports. You can choose the media for the ports via
the media modules.

12 MS20/MS30
Release 2.0 02/06
DTheMS30-... devicevariants are modular switches with up to 8, 16 or 24 *
10/100 Mbit Ethernet ports and up to 2 additional Gigabit ports (1000 Mbit
Ethernet). You can choose the media for the ports via the media modules.
The devices also provide you with the following options for selecting the
variant you desire:
DTemperature range:
DStandard (0 °C to +60 °C)
DExtended (-40 °C to +70 °C) without conformal coating
DExtended (-40 °C to +70 °C) with conformal coating
DVoltage range:
D18 to 32 VDC (flatter basic module design)
D18 to 60 VDC (deeper basic module design)
DCertifications:
DCE, UL
DCE, UL, German Lloyd (GL), IEC 61850 Declaration (Sub Station),
IEEE 1613 (Sub Station), EN 50121-4 Railway (along track)
DCE, UL, German Lloyd (GL), IEC 61850 Declaration (Sub Station),
IEEE 1613 (Sub Station), EN 50121-4 Railway (along track), EN
50155 Declaration (Railway) and ATEX 100a (Hazardous Location)
DSoftware version: Enhanced or Professional
The devices comply with the specifications of the standards:
ISO/IEC 8802-3u 100BASE-TX/-1000BASE-T,
ISO/IEC 8802-3 100BASE-FX and
ISO/IEC 8802-3 1000BASE-SX/LX.
The basic module of the MICE contains all the function units, such as: switch
function, management function, redundancy function, display control,
voltage connection, management connection, adjustable controls, slots for
media modules.
Family Designed for
MS20 Larger numbers of ports,
number of 100 Mbit ports desired, temperature range, voltage range, certifi-
cates and software variant can be selected
MS30 Larger numbers of ports and larger bandwidth requirement,
number of 100/1000 Mbit ports desired, temperature range, voltage range,
certificates and software variant can be selected

MS20/MS30
Release 2.0 02/06 13
1.1.1 MS20-... /MS30-... combination options
The product designation of your MS20/MS30 device is made from combining
the desired product characteristics in accordance with the following table.
The short designation is in column 3.
UExample: MS30-0802SAAE
Position Attribute Ident. Feature
1 to 4 Produkt MS20 Modular Switch without gigabit ports
MS30 Modular Switch with gigabit ports
5 - (hyphen) -
6 to 7 Number of 10/100 Mbit ports 08 8 * 10/100 Mbit Ethernet
16 16 * 10/100 Mbit Ethernet
24 24 * 10/100 Mbit Ethernet
8 and 9 Number of 1000 Mbit ports 00 0 * 1000 Mbit Ethernet
02 2 * 1000 Mbit Ethernet
14 Temperature range S Standard 0 °C to +60 °C
T Extended -40 °C to +70 °C
E Extended -40 °C to +70 °C, conformal
coating
15 Voltage range A 18 VDC to 32 VDC
C 18 VDC to 60 VDC
16 Specifications A CE, UL
H CE, UL, GL, railway (along track),
sub station
B CE, UL, GL, railway (along track), sub
station, hazardous location (ATEX),
railway (train)
17 Software version E Enhanced
P Professional
Table 1: Combination options of the MS20/MS30 device versions
MS30- 08 02 S A A E
MS30-: Modular switch with gigabit ports
08: 8 x 100 Mbit Ethernet ports
02: 2 x 1000 Mbit Ethernet ports
S: Temperature range standard (0°C to 60°C)
A: Voltage range 18 VDC to 32 VDC
A: Specifications CE and UL
E: Software version enhanced

14 MS20/MS30
Release 2.0 02/06
1.1.2 Number of ports and media
UDevice versions with 10/100 Mbit ports
MS20-0800..., MS20-1600..., MS20-2400...
Depending on the variant, the MS20 basic modules provide you with the
following number of slots for media modules and the following maximum
number of connectable network segments:
1) Expandable to 24 ports with MB2-T expansion module
Fig. 1: Overview interfaces, display elements and controls of the MS20 -...
Basic module Number of slots for
10/100 Mbit media
modules
Maximum number of connectable 10/100 Mbit
network segments when connecting 4 port media
modules
MS20-0800... 2 8
MS20-1600... 4 16 1)
MS20-2400... 6 24
Switch
basic module
MS20-…
4 slots for media modules
MM2-… or MM3-… with 2-4 ports each
Key for
display
status
LEDs
device status,
display status
Terminal block,
V.24 port,
USB port,
DIP switch
MS20-1600...
MS20-0800...
MS20-2400...
Grounding screw

MS20/MS30
Release 2.0 02/06 15
Fig. 2: Interfaces of the MS20-... and MS30-... on the bottom of the device
UDevice versions with 1000 Mbit and 10/100 Mbit ports
MS30-0802..., MS30-1602..., MS30-2402...
Depending on the model, the MS30 basic modules offer you the
following number of slots for media modules and the following maximum
amount of connectable network segments:
1) Expandable to 24 ports with MB2-T expansion module
Basic module Number of
slots for
10/100Mbit
media
modules
Number of
slots for
1000 Mbit
media
modules
Maximum number of
connectable 10/100
Mbitnetworksegments
whenconnecting4port
media modules
Maximum amount of
connectable 1000 Mbit
network segments
MS30-0802... 2 1 8 2
MS30-1602... 4 1 16 1) 2
MS30-2402... 6 1 24 2
MICE MS20/30
switch basic module
with 18 to 60 VDC
voltage range
V.24 port
USB port
terminal block
(power 1)
DIP switch
terminal block
(power 2)
V.24 port
USB port
DIP switch
terminal block (power 1)
terminal block (power 2)
MICE MS20/30
switch basic module
with 18 to 32 VDC
voltage range

16 MS20/MS30
Release 2.0 02/06
Fig. 3: Overview interfaces, display elements and controls of the MS30
The figure “Interfaces of the MS20-... and MS30-... on the bottom of the de-
vice” on page 15 illustrates the interfaces on the bottom of the MS30 device.
1.1.3 Media modules
The MICE media modules form the interface of the device to the LAN.
They can be attached in the
DBasic module MS20-...
DBasic module MS30-...
They differ with regard to the number of interfaces and media type. The
various interfaces of the MICE media modules offer you the following inter-
face-specific functions:
DSpecific functions of the TP/TX interface
DLink Control
DAuto Polarity Exchange
DAutonegotiation
DAutocrossing (it does not matter whether you connect devices using a
cross-over or straight cable)
DSpecific functions of the F/O interface
DLink control
DTransceiver- (AUI-) specific functions
Slot for
SFP module
MM4-TX/SFP
Switch
basic module
MS30-…
4 slots for media modules
MM2-… or MM3-… with 2-4 ports each
Key for
display
status
LEDs
device status,
display status
Terminal block,
V.24 port,
USB port,
DIP switch
MS30-1600...
MS30-0800...
MS30-2400...
Grounding screw

MS20/MS30
Release 2.0 02/06 17
DCollision detection
DCollision Test (SQE)
DJabber-Control
DDTEPower monitor
UMICE 2000 media modules
Fig. 4: Port assignment
MICE 2000
media modules
Module type AUI port TP ports
10/100
F/O port
multi-
mode
10 MBit/
s
F/O port
multi-
mode
POF
100
MBit/s
F/O port
multi-
mode
100
MBit/s
F/O port
single-
mode
1300
nm,
100
MBit/s
F/O port
single-
mode
1550
nm,
100
MBit/s
MM2-4TX1(-EEC)–4,RJ45–––––
MM2 - 2FLM4 – – 2, ST – – – –
MM2 - 2FXP4 – – – 2, ST – – –
MM2-4FXM3 ––––4,MTRJ––
MM2 - 2FXM3 / 2TX1 – 2, RJ45 – – 2, MTRJ – –
MM2-2FXM2 ––––2,DSC––
MM2-2FXS2 –––––2,DSC–
Table 2: Media connectors each MICE 2000 media module (number and kind)
Port 1
Port 3
Port 2
Port 4

18 MS20/MS30
Release 2.0 02/06
UMICE 3000 media modules
Fig. 5: Port assignment
MICE 3000
media modules
Module type AUI port TP ports
10/100
F/O port
multi-
mode
10
MBit/s
F/O port
multi-
mode
POF
100
MBit/s
F/O port
multi-
mode
100
MBit/s
F/O port
single-
mode
1300
nm,
100
MBit/s
F/O port
single-
mode
1550
nm,
100
MBit/s
MM3-2AUI 2,Sub-D––––––
MM3-4TX5 –4,M12–––––
MM3-4TX1-RT – 4, RJ45 – – – – –
MM3-2FLM4/2TX1-RT – 2, RJ45 2, ST – – – –
MM3-4FLM4 – – 4, ST – – – –
MM3-4FXP4 – – – 4, ST – – –
MM3-1FXM2/3TX1 – 3, RJ45 – – 1, DSC – –
MM3-2FXM2/2TX1(-EEC) – 2, RJ45 – – 2, DSC – –
MM3-2FXM2/2TX1-RT – 2, RJ45 – – 2, DSC – –
MM3-2FXM4/2TX1 – 2, RJ45 – – 2, ST – –
MM3-4FXM2 ––––4,DSC––
MM3-4FXM4 ––––4,ST––
MM3-1FXS2/3TX1(-EEC) – 3, RJ45 – – – 1, DSC –
MM3-2FXS2/2TX1 – 2, RJ45 – – – 2, DSC –
MM3-2FXS2/2TX1-RT – 2, RJ45 – – – 2, DSC –
MM3-4FXS2 –––––4,DSC–
MM3-1FXL2/3TX1 – 3, RJ45 – – – – 1, DSC
Table 3: Media connectors each MICE 3000 media module (number and kind)
Port 1
Port 3
Port 2
Port 4

MS20/MS30
Release 2.0 02/06 19
UMICE 4000 media modules
The 2-port media module MM4 - 2TX/SFP has two TP interfaces and two
sockets for Hirschmann SFP modules.
The 4-port media module MM4 - 4TX/SFP can also be used in the MS20/
MS30. It has four TP interfaces and four sockets for Hirschmann SFP mo-
dules. The MS30 gigabit slot (slot on the left side of the switch basic mo-
dule) provides two ports.
Every slot allows you to replace a TP interface by a F/O interface using a
SFPmodule.Insertingthe SFP module deactivates thecorrespondingTP
interface.
Note: Only use SFP modules from Hirschmann.
Fig. 6: Port assignment
MICE 4000 media modules
Module type TP ports 10/100/1000 SFP ports alternativ to TP ports
MM4 - 2TX/SFP 2, RJ45 2
MM4 - 4TX/SFP 4, RJ45 4
Table 4: Media connectors each MICE 4000 media module (number and kind)
Port 2*
Port 4*
Port 1
Port 2
Port 3
Port 4
Port 1*
Port 3*
Port 1 to 4: SPF ports, alternativ to
port 1* to 4* (TP ports)

20 MS20/MS30
Release 2.0 02/06
1.1.4 MB - 2T expansion module
The MB-2T expansion module allows you to add 2 slots to the MICE
MS20-1600 / MS30-1602 basic modules for installing media modules.
Fig. 7: MB - 2T expansion module
1.1.5 SFP module
SFP modules are optical transceivers. SFP stands for Small Form-factor
Pluggable and is often named mini-GBIC (GigaBit Interface Converter).
They are plugged onto the special ports of the MICE 4000 media modules
MM4-2TX/SFP (or MM4-4TX/SFP) to provide a F/O port. Inserting the SFP
module deactivates the corresponding TP interface.
Module type Transmission Expansion Connector
M-SFP-SX/LC 850 nm multimode 0,55 km LC
M-SFP-LX/LC 1330 nm multimode
1330 nm singlemode 0,55 km 20 km LC LC
M-SFP-LH/LC Long haul 8-72 km LC
M-SFP-LH+/LC Long haul + 60-120 km LC
Table 5: SFP modules