Hisense HAF350A User manual

UPRIGHT REFRIGERATOR USER MANUAL
MODEL: HAF350A

2
IMPORTANT: before you install your refrigerator PLEASE CHECK FOR ANY DAMAGE
OR MARKS. If you find that the refrigerator is damaged or marked you must report this
within 7 days if you wish to claim for the damaged marks under the manufactures warranty.
This does not affect your statutory rights.
Operating Instructions
Dear customer,
To enable you to use your new REFRIGERATOR effectively and safely, please read this
instruction book carefully before you use the appliance, which contains important information for
installation, safe use and maintenance of this appliance. Please keep the book for future reference
and remember to pass it on to the new owner. The following symbols will be found in the book to
guide you through the instructions:
Guide to use the instruction book
Warnings Operating instructions
Tips and notes

3
INDEX
PageNo.
Important Safety Instructions............................................................................... 4
Installation Instructions......................................................................................... 5
Description of theAppliance ................................................................................. 5
Using YourAppliance............................................................................................. 7
Thermostat Control................................................................................................ 8
Change the Reversible Door.................................................................................. 8
Hints and Tips....................................................................................................... 11
Trouble Shooting .................................................................................................. 12
Correct Positioning .............................................................................................. 13

4
Important Safety Instructions
These warnings are provided in the interest of your safety. Ensure that you understand them
all before installing or using this appliance. Your safety is of paramount importance. If you
are still unsure about the meaning of these warnings, contact the supplier for assistance.
Intended use
The refrigerator is designed for domestic use only, in detail for storage of edible foods at low
temperature. If the refrigerator is used for other purposes such as commercial applications or
used incorrectly, the manufacturer accepts no liability for any damage that may occur.
Prior to initial start-up
Check the appliance for transport damage. Under no circumstances should a damaged
appliance be plugged in. In the event of serious damage, contact your supplier.
Refrigerant
This is contained within the refrigerant circuit of the appliance. Ensure that none of the
components of the refrigerant circuit becomes damaged during transportation and
installation.
If the refrigerant circuit should be damaged:
•Avoid opening near flames and sources of ignition.
•Thoroughly ventilate the room in which the appliance is situated.
Other warnings include:
•WARNING —Ensure refrigerator is located in well ventilated area.
•WARNING —Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
•WARNING —Do not damage the refrigerant circuit.
•WARNING —Do not use electrical appliances inside the food storage compartments.
•WARNING —The appliance is not intended for use by young children without
supervision.
•WARNING —When disposing of the appliance do so only at an authorized waste
disposal centre. Do not expose to flame.
•WARNING —If the supply cord is damaged, it must be replaced by the manufacturer or
their service agent or a similarly qualified person.

5
Safety of children
Keep packaging materials away from children to avoid the risk of suffocation!
Disposal
When you dispose of freezers, please remove any doors. Children can suffocate if they get
trapped inside. Avoid safety hazards by carefully disposing of this appliance.
Daily operation
Do not store any container with flammable materials such as spray cans in the refrigerator.
Do not operate any electrical appliance in the refrigerator (e.g. electric ice cream makers, mixers
etc.).
Before cleaning the appliance, always switch off the appliance and unplug it.
In case of malfunction
If a malfunction occurs, please look first in the “Trouble Shooting” section for help. If the
information given there does not help, ask your supplier for help. Under no circumstances should
you attempt to repair the appliance yourself, as repairs carried out by inexperienced persons may
cause injuries or serious malfunctions.
Installation Instructions
Installation Requirements
The appliance should be placed in a dry and well-ventilated room. As the performance and energy
consumption of the refrigerator can be affected by the ambient temperature, the following
instructions should be ensured:
-Do not expose the appliance to direct sunlight,
-Do not install the appliance close to radiators, cookers or other sources of heat,
Your appliance will be heavy when loaded with foods and must therefore be placed on a strong
firm floor and ensure the power socket is accessible.
Ventilation Requirements
Ensure that the air can circulate freely around the cabinet. There should be 100mm, and a gap of
25mm on either side of the appliance.
Ensure that the appliance does not stand on the electrical supply cable. Whenever possible the
back of the appliance should be close to a wall but remember to leave the suitable distance
required for ventilation.
Leveling
The appliance should be level in order to eliminate rocking. To make the appliance level, it
should be upright and both adjusters should be firmly contacted with the floor. You can also
adjust the level by screwing out the appropriate level adjuster at the front (use your fingers or a
suitable spanner), but much care should be taken when moving this appliance as it may be heavy.
Description of theAppliance

6
View of the appliance
1
2
3
4
5
6
7
8
9
10
1.Controlpanel 2.Lamp(inside) 3.Airoutlet 4.Shelf 5.Crispercover
6. Crisper drawer 7. Door rack cover 8. Egg rack(inside) 9. Door rack 10. Door lower rack
Note:
Due to the updated modifications of our products, your refrigerator may differ slightly from this Instruction
Manual, but the functions and using methods remain the same.

7
Refrigerator Chamber
The refrigerator compartment is for storing food that does not need to be frozen. Temperatures in the
refrigerator compartment differ in each section, to accommodate different types of food, as shown in the
diagram below:
①Suitable for storing cake, cooked-foods, canned foods, meat, dairy products, etc.
②Suitable for storing fruits, vegetables, salads, etc.
③Suitable for storing eggs.
④Suitable for storing small bottles, etc.
⑤Suitable for storing butter, cheese, etc.
1
2
3
4
5
Shelf of refrigerator chamber
There are four adjustable shelves in the refrigerator chamber, which can be removed for cleaning.
Crisper cover
This is for controlling the temperature in the crisper drawer to prevent vegetables losing moisture.
The controlling knob on the cover can be used to regulate the humidity in the drawer. By closing
the controls, that will decrease the humidity.
Using YourAppliance
This appliance is designed for domestic use only, specifically for the storage of edible foods.
Before use
Remove all securing tapes. Wash the inside of the appliance with lukewarm water added with a
little bicarbonate of soda (5ml to 0.5 liter of water). Do not use soap or detergent as the smell
may linger. After cleaning, dry the appliance thoroughly.

8
To start the appliance
Operating instructions
1. Allow the appliance to stand for 2 hours after installation.
2. Plug in the appliance and turn on the power.
3. Turn the thermostat control to the required setting. A midway setting is usually suitable for
normal operation.
4. Leave the appliance switched on for approximately 4 hours to reach the correct temperature
before placing food inside.
Thermostat Control
The thermostat control panel controls the temperature inside the refrigerator compartment or
REFRIGERATOR compartment, and is located on the top cover plate.
Super cool
6 C
Power Up Down Super cool
zINDICATOR LIGHT OF POWER
When the refrigerator gets connection to power, it starts to work and the indicator light of power
is on. When the refrigerator loses connection to power, the indicator light is off.
zTHERMOSTAT OF THE REFRIGERATOR
If you press the ▲or ▼button, you can select the temperature ranging from +1oC to +10oC. If
you press and hold the ▲or ▼button for longer than 1 second, the temperature will increase or
decrease rapidly. When you adjust temperature, the temperature display will flash. If you don't
touch any button for about 5 seconds, the selected temperature will be set up and flash stops.
Then the temperature display shows the current actual temperature inside the refrigerator.
zSUPER COOL
By simply pressing the super cool button, the refrigerator will operate in the super cool mode.
The indicator light of super cool will be on. In super cool mode, the temperature inside the
refrigerator will drop rapidly until the temperature reaches your setting. Then the refrigerator will
automatically quit the super cool mode. The indicator light of super cool will be off. Before that
you can also manually quit the super cool mode by pressing the super cool button again.
zALARM
If the door is left open for 2 minutes, the alarm will sound to remind you closing the door. If the
door is still open, the alarm will sound 3 times per 30 seconds and last for 10 minutes. Then the
alarm will automatically stop.
CHANGE THE REVERSIBLE DOOR
The refrigerator is supplied with the door hinges on the right side. If you wish to change the
opening direction, follow the instructions below:

9
Warning!
Before changing door position, remove power plug from terminal.
Tip:
Food in the fridge should always be covered or packaged, to prevent drying and tainting.
The following are suited for packaging:
zPolyethylene airtight bags and wraps
zPlastic containers with lids
zSpecial plastic covers with elastic
zAluminium foil
1. Remove the top cover
panel by removing 3
screws at the back of the
top panel, and 2 screws
from the top of the cover
panel.
2. Remove the 3 screws on
the left hand side, situated
on top of the fridge, that
hold the control panel in
place. Then do the same
for the 3 screws on the
right hand side.
3. Loosen the 3 screws that
hold the top hinge plate in
place.
Pull out the pin, and lift
the lower door off the
lower hinge.

10
4. Remove the screws from
the lower hinge and refit
them on the opposite side.
(The unit may need to be
tilted to the side for this)
Take note to position the
screws and the pin on the
outer holes of the hinge.
Remove the metal piece
on the bottom of the door
to the opposite side.
5. Position the hinge plate
on the top of the unit, on
the opposite side, not
tightening the screws
completely.
6. Fit the door to the lower
hinge and place the pin in
the upper hole of the door.
7. Lift the facia panel and
position the pin into the
hole of the facia panel and
the hinge plate.
8. Tighten the pin nut above
the hinge plate.
9. Tighten the remaining
screws of the hinge
plate.Make sure the door
is aligned properly, then
tighten the hinge plate on
the opposite side.
10. Replace the top cover
panel, and tighten 3
screws on the back and
two screws on the top.

11
Door handle reversal (optional)
zRemove the handle screws that hold the door handle on the door from the left holes as
illustrated, and transfer them to the covered holes on the right side, then tighten the screws.
Then remove the screws that hold the handle cover on the door panel from the left side to the
right side, tighten the screws.
Hints and Tips
Food storage
Avoid buying frozen food if you cannot store it.
Storage in original food containers is advisable. Place already frozen foods into the refrigerator as
soon as possible, and be sure to:
zNot store too many items in the drawers.
zAllow air to circulate around each item.
zNot store uncovered food.
Ensure the foods placed in the refrigerator are dated and labeled, and used in date order.
Energy saving advice
Do not place the appliance close to heat sources such as cookers, dishwashers or radiators. Make
sure the appliance is placed in a cool well-ventilated room so that the air can circulate very well.
Avoid unnecessary frosting in the cabinet by packing all foodstuffs into sealed packages. Avoid
keeping the door open for a long time, as warm air will enter the cabinet and the cold air inside
will leak out of the cabinet. Ensure that there is no obstruction preventing the door from closing
properly.
In the event of a power failure
If there is a power failure while the appliance is in operation, do not open the door. If the
temperature inside your REFRIGERATOR should rise, causing food to defrost, do not refreeze
the food.
The following guidelines will assist you:
zIce cream: Once thawed should be discarded.
zFruit and vegetables: If soft should be cooked as soon as possible.
zBread and cakes: Can be refrozen without danger.
zShellfish: Should be refrigerated and used up quickly.
zCooked dishes: i.e. casseroles, should be refrigerated and used up.
zLarge pieces of meat: Can be refrozen if there are ice crystals remaining within them.
zSmall joints: Should be cooked and then refrozen as cooked dishes.
zChicken: Should be cooked and refrozen as a fresh dish.

12
Trouble Shooting
Noises during Operation
The following noises are normal characteristics of the appliance when it works:
zWhenever the compressor switches on or off, a click can be heard.
zAs soon as the compressor is in operation, you can hear it humming.
zWhen refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
zEven after the compressor has been switched off, residue noise can be heard for a short time.
Repairs to the REFRIGERATOR may only be conducted by qualified service engineers.
Improper repairs can lead to significant hazards for users. If your appliance needs repairing,
please contact your specialist dealer.
PROBLEM SOLUTION
The refrigerator does not
operate
Check that it is properly plugged in, that the fuse has not
blown or that the circuit-breaker has not tripped.
The REFRIGERATOR is
too warm
Check the thermostat and make sure that the door stays
open as little as possible. Also check that the door closes
properly.
The motor runs
continuously
Make sure that the REFRIGERATOR is well ventilated,
leaving gaps as mentioned in the “Installation” chapter.
Also check that your appliance is not exposed to a direct
source of heat.
You may also have placed too much food inside or the door
may not close properly.

13
Correct Positioning
Good ventilation
Power supply
Power Cord
Protection from Moisture
Sufficient ventilation is required to ensure your refrigerator
operates at optimum high efficiency and with lowest possible
power consumption, therefore you are required to place your
appliance in a position with adequate clearance. We recommend
you place your refrigerator at 100mm away from the wall to the
back of your appliance, 200mm from the side clearance and
300mm from the top of your appliance. A clearance space of 160
degrees is required for the appliance door.
This appliance operates via a single phase power supply and
must be plugged into its own dedicated 220-240 Volts, 50Hz, AC
electric outlet. Ensure that the electric outlet is properly earthed to
ground, if unsure please consult a qualified electrician.
Keep the cord away from the compressor. The surface heat from
this area may cause the cord to melt and provoke electricity leakage.
Do not use an extension cord or adaptor plug. To remove the power
cord always grip the plug firmly and pull straight out of the
receptacle to prevent damaging the cord. Keep the plug and cord
accessible.
Avoid placing the refrigerator in a place where heavy moisture or
high humidity is present, keep the appliance in a dry place away
from frosty or unprotected areas like for example a verandah or
garage. Do not spray directly or submerse the appliance in water.
± 10 %

14
Placing
Protection from Heat
The fridge should be far away from any heat source or direct
sunshine.
Important Safety Instructions
Relocating
When placed or moved, the refrigerator can not be set horizantally
or declined to more than 45 or never upside down.
The refrigerator should be placed on a solid flat floor. Minor level
adjustments can be made by turning the leveling feet to suit. The
front of the appliance should be set slightly higher than to the rear
so the door can tilt back. If appliance rocks on one corner to the
opposite rear corner it means the floor is uneven, packing is required
please use thin pieces of solid material such as thin board, vinyl floor tiles
or laminate and pack under the ridge to the rear of the appliance.
It is important that you do not store any volatile or combustible
materials in any freezer or refrigerator such as gas, petrol,
alcohol, lacquer or any pressurized aerosol containers that
indicates a flammable substance or flammable symbol. If you do
so, you may cause an explosion.