SAFETY PRECAUTIONS
!
!
WARNING
Wiring:
Wiring work shall be carried out by electrical experts.
Otherwise, there is a anger of electric shock, fire an /or amage of pro uct.
I ple ent wiring after checking that the power supply is off.
Otherwise, there is a anger of electric shock an /or fire.
Operating:
Be sure not to touch the surface or the ter inal of option board while energizing.
Otherwise, there is a anger of electric shock an /or fire.
Be sure not to re ove the Canopen option printed board while operating.
Otherwise, there is a anger of electric shock an /or fire.
Maintenance, Inspection and Part Replace ent:
Wait at least 5 inutes after turning off the input power supply before perfor ing aintenance and
inspection.
(Make sure the “POW” LED display on the inverter is off and DC voltage between P-N ter inals is less
than 45V)
Otherwise, there is a anger of electric shock.
Make sure that only qualified persons will perfor aintenance, inspection, and part replace ent
(Before starting the work, re ove etallic objects fro your person (wristwatch, bracelet, etc.).
Be sure to use tools protected with insulation.)
Otherwise, there is a anger of electric shock an /or injury.
Note:
Never odify the unit.
Otherwise, there is a anger of electric shock an /or injury.
CAUTION
Installation:
Be sure not to let the foreign atter enter such as wire clippings, spatter fro welding, etal shaving,
dust etc.
Otherwise, there is a anger of fire.
Be sure to fix inverter to option printed board with an attached fixed screw.
Otherwise, there is a anger of connecting error.
Be sure to fasten the screws connecting signal wire in side of option printed board. Check for any
loosening of screw.
Otherwise, there is a anger of connecting error.
Wiring:
Be sure to fasten the screws not to loose.
Otherwise, there is a anger of connecting error.
Operation:
Check rotary direction, abnor al otor noise and vibrations during operating.
Otherwise, there is a anger of injury to personnel an /or machine breakage
