Hobie Mirage Drive Owner's manual

Please read through the instruction manual before using this product.
Hobie
Mirage Drive
Instruction Supplement
®
®

2
Mirage Drive Cranks
1
2
1
Insert cranks into
drums
2
Tighten crank bolt
using a 9/16” or
15mm wrench
until the bolt is
flush with the
drum.
Assembly
Identifying your Mirage well
Leave nubs if
Mirage well
features alignment
grooves.
Remove nubs if
Mirage well does not
feature alignment
grooves.
Cut nubs flush to the
edge of the shoulder on
the Mirage Drive spine.

3
Before cut
Top
View
Shoulder
After cut

Hobie Cat Company
Oceanside, California, USA
1-800-HOBIE-49
hobiecat.com
Hobie Cat Australasia
Huskisson, New South Wales, Australia
1-800-4-HOBIE
hobiecat.com.au
Hobie Cat Europe
Toulon, France
[phone]
hobie-cat.net
Hobie Kayak Europe
Stellendam, The Netherlands
[phone]
hobie-kayak.com
Hobie Cat Brazil
Bahia
Brazil
[phone]
hobiecat.com.br
REV 130919