Hollyland 0108B User manual

0108B(SYSCOMT1000)
Wireless Intercom System
Shenzhen Hollyland Technology Co.,Ltd

SyscomT1000 Intercom System Introduction
lTelecom level audio quality, effective coverage 300m
lHigh-capacity lithium battery built-in beltpack, support
quick charging
lLarge size colorful LCD display, can be used as TALLY light
lProfessional LEMO headset interface, compact and
durable
lSupport dynamic mic headset, effectively reduce
environmental noise
lCompatible with 3.5mm headset of Android, Apple and
etc

Syscom1000T Intercom System Introduction
ØBeltpack menu with advanced setting function, can be
set to multiple work mode.
ØSupport maximum 10 audio(8 beltpacks+1 main
station+1 analog audio in).
ØBase station with mute key, supporting muting all
beltpacks with one simple press.
ØBase station with a pair of four-wire external analog
audio interface, support 2 base stations cascade
connected.
ØEasy operation, unbox and use.
ØSupport USB upgrade.

Base Station
Beltpack
Interface
Anternna Interface x4
4-wire Audio Input & Output Interface x 2
25 PIN Tally Input Interface
DC IN, AC IN
USB Interface
XLR Interface
8-pin LEMO Headset Interface
3.5mm Audio Interface
Anternna Interface x 2
3.5mm Audio Interface
8-pin LEMO Audio Interface
3.5mm Tally Output Interface
USB Type-C Interface
Power Supply
Voltage Range
10-20V DC & 110-240V AC
4000 mAh Polymer Lithium Battery
Power
Consumption
<6W
<3w
Size
482.6x175x44.4 mm
120x71x25 mm
Frequency Band
1.9GHz
1.9GHz
Modulation Mode
GFSK
GFSK
Transmit Power
Max 24dBm
Max 24dBm
Receiver Sensitivity
-93dBm
-93dBm
SyscomT1000TIntercom System Specification

Switch LEMO Headset
Interface
USB
Upgrade
Base Station
Volume
External
Speaker
LCD
Screen
3.5mm
Headset
Dynamic/
Condenser
Mic Switch
Gooseneck
Mic Interface
Beltpack Mic
MUTE button
Base Station
Mic MUTE
button

Note：
Beltpacks mic KILL light
1. Light on: beltpacks'
MIC muted(beltpacks
can call base station to
request unmuting by
long pressing PAIR
button on the side
panel).
2. Light flicker: belt pack
requesting .communica
tion
3. Light off: all belt packs
mic are open.
Tally Mode
Switch
Test
Interface DC Input
AC Input
Tally
Interface
Analog volume
adjustment
knob
Analog Audio
Interface
Antenna
Interface

ØVolume Control and Power Switch – Turns the power
on/off and controls headset volume.
ØLithium battery life is 10hrs if fully charged. Supporting
Type-C fast charging, 30 min charged, its capacity can
support 3h use.
ØLong press middle button, enter menu, the first option
is pairing(beltpack can pair only in LOST and NULL
status), the second option is tech info.
ØLong press mute/call button to switch MUTE/CALL
status. Double click on the button to switch
CALL/MUTE.
ØBeltpack standardly equipped with Pro LEMO headset,
support 3.5mm headset.
ØBeltpack in MUTE status by default.
ØLCD screen, Stronger color TALLY light for indication.

lBase Station:
Removed XLR headset interface, added pro LEMO headset interface
Added MIC switch, support dynamic gooseneck mic and condenser mic
Added remote MIC Kill button to mute all beltpacks
Added analog audio input and output volume knob
Tally interface changed from 2 DB15 to 1 DB25
Comparison with Syscom1000TE

lBeltpack: Added pro LEMO headset interface
Added big sized color LCD display
Changed to built-in lithium battery power
USB interface changed to Type-C type, support fast charging
lHeadset：Upgraded to dynamic mic, effectively reduce environmental noise
Headset interface changed to 8-pin LEMO interface
lFunction：Pair mode changed to USB cable pair
Beltpack added scene mode selection
Base station added one button MUTE all beltpack funtion
Comparison with Syscom1000TE

¼ Cold Shoe External TALLY Lamp TALLY Cable
(according to switcher model)
D-TAP to XLR DC Cable Antenna Extend
Cable
Syscom1000T Optional Accessories

Connection Between Syscom1000T and ClearCom
702 Wired Intercom System
2-wire/4-wire

ClearCom MS-702, the most popular wired intercom system
2-wire interface normally in 3-pin XLR shape, pin definition:
1--》GND
2--》Power+Mic(Modulation Signal)
3--》Analog Audio(Analog signal)
4. 2-Wire/4-wire
2-wire interface: 4-wire interface
4-wire interface normally in one group of
XLR(Male+Female)
Male ouput(AUDIO IN), Female input(AUDIO OUT)
1--》GND
2--》Analog Audio(Analog signal)
3--》Analog Audio(Analog signal)

Panasonic 410（DB15 x2）Datavideo HS2850 (DB25) SONY MCS-8M (DB15)
FOR-A XT-100(DB25) BMD Switcher
(RJ45 Port, TALLY convertion box needed) ROLAND Switcher(DB25)
Common Switchers

Standby video—GREEN
Tally light Programming
video—RED
Tally light
Video switch
Video selection
8 not selected
videos-- Tally
lights OFF

Common Switcher Rear Panel Interface
8 wired intercom beltpacks
8 SDI Input 2 HDMI Input 2 SDI Output TALLY signal output(connect to Tally
interface of Syscom1000T base station

EFP Box &Outside Broadcast Van

Broadcast Van Rear Panel Interface

Application

A: The beltpacks of
SyscomT1000 have 2 work
modes: Quite Mode and Noisy
Mode. The office is a quite
environment, thus quite mode
should be used. Noisy mode
should be used in concert and
other noisy circumstances.
A: Enter beltpack setting, change
mic type to condensor mic.
A: 1. Enter setting of beltpack,
make sure the mic type is
correctly set, LEMO headset is
dynamic mic
2. The headset mic should face
to your mouth and keep its
distance 3cm. Because dynamic
mic has strong directivity and
weak sensitivity.
2. My voice volume heard by
other is very low when using
my own headset.
3. Why others' voice volume is
low when using standardly
equipped pro headset?
1. Why background noise of
beltpack is a little big in office?
SyscomT1000 FAQ

A: The standardly equipped
gooseneck mic is dynamic mic,
should keep 5cm distance to
mouth, not too far
A: Long press button on the side
panel, switch to CALL status.
A：It takes 3 hours to be fully
charged, battery life is 10hrs. It
can work 3 hours after 30 min
quick charging.
5. Why beltpack can't be
heard by others?
6. How long can battery of
syscom1000T beltpack work?
How long does it takes to
fully charge? How long can it
work after 30 min charging?
4. Why the voice volume of
gooseneck mic of base station
heard by others is very low?
SyscomT1000 FAQ