Hollyland Solidcom C1 Pro User manual

Hollyland Solidcom C1 Pro
Quick Guide
V1.0.0

Introduction
1
Thank you for purchasing Hollyland Solidcom C1 Pro full-duplex wireless noise cancelling intercom system.
The Solidcom C1 Pro, adopting the advanced DECT technology, is Hollyland's rst wireless self-contained
intercom system with Environmental Noise Cancellation (ENC). The system operates in the 1.9GHz band,
providing a reliable LOS range of up to 1,100ft (350m).
This Quick Guide will help you through the installation and use of the equipment.

2
Solidcom C1 Pro - 2S 2-person Noise Cancelling Headset Intercom
① Master Headset (With Red Nameplate) x1
② Remote Headset (With Blue Nameplate) x1
③ Charging Case x1
④ Batte x4
⑤ Microphone Cushion x2
⑥ Over-ear Leather Cushion x2
⑦ On-ear Foam Cushion x2
⑧ USB-A to USB-C Cable x1
⑨ Storage Case x1
⑩ x1 Quick Guide
Warranty Card x1

Note: The quantity of the items depends on the product conguration
(WithRedNameplate)
(WithBlueNameplate)
⑪
Packing List
⑪⑩⑨
⑦
⑧
⑥⑤
③ ④②①

3
Solidcom C1 Pro - 3S 3-person Noise Cancelling Headset Intercom
① x1 Master Headset (With Red Nameplate)
② x2Remote Headset (With Blue Nameplate)
③ x1 Charging Case
④ x6Batte
⑤ Microphone Cushion
x3
⑥ Over-ear Leather Cushion x3
⑦ On-ear Foam Cushion x3
⑧ USB-A to USB-C Cable x1
⑨ Storage Case x1

Note: The quantity of the items depends on the product conguration
⑪
(WithRedNameplate)
(WithBlueNameplate)
⑩ x1 Quick Guide
 Warranty Card x1
⑪
Packing List
⑩⑨
⑦
⑧
⑥⑤
③ ④②①

Packing List
4
Solidcom C1 Pro - 4S 4-person Noise Cancelling Headset Intercom

① Master Headset (With Red Nameplate) x1
② Remote Headset (With Blue Nameplate) x3
③ Charging Case x1
④ DC Adapter x1
⑤ Batte x8
⑥ Microphone Cushion x4
⑦ Over-ear Leather Cushion x4
⑧ On-ear Foam Cushion x4
⑨ USB-A to USB-C Cable x1
⑩ Storage Case x1

Note: The quantity of the items depends on the product conguration
 x1 Quick Guide
 Warranty Card x1
(WithRedNameplate)
(WithBlueNameplate)
⑪
⑫
⑪ ⑫⑩⑨
⑦ ⑧⑥⑤
③ ④②①

5
Solidcom C1 Pro - 6S 6-person Noise Cancelling Headset Intercom
① Master Headset (With Red Nameplate) x1
② Remote Headset (With Blue Nameplate) x5
③ Charging Case x1
④ DC Adapter x1
⑤ Batte x12
⑥ Microphone Cushion x6
⑦ Over-ear Leather Cushion x6
⑧ On-ear Foam Cushion x6
⑨ USB-A to USB-C Cable x1
⑩ Storage Case x1

Note: The quantity of the items depends on the product conguration
 x1 Quick Guide
 Warranty Card x1
⑪
⑫
Packing List
(WithRedNameplate)
(WithBlueNameplate)
⑪ ⑫⑩⑨
⑦ ⑧⑥⑤
③ ④②①

6
Solidcom C1 Pro - 8S 8-person Noise Cancelling Headset Intercom
① Master Headset (With Red Nameplate) x1
② Remote Headset (With Blue Nameplate) x7
③ Charging Case x1
④ DC Adapter x1
⑤ Batte x16
⑥ Microphone Cushion x8
⑦ Over-ear Leather Cushion x8
⑧ On-ear Foam Cushion x8
⑨ USB-A to USB-C Cable x1
⑩ Storage Case x1

Note: The quantity of the items depends on the product conguration
⑪ ⑫
Packing List
 x1 Quick Guide
 Warranty Card x1
⑪
⑫
(WithRedNameplate)
(WithBlueNameplate)
⑩⑨
⑦ ⑧⑥⑤
③ ④②①

Operation Guide
1. Ensure that all the headsets are turned ON.
2. The indicator light stops ashing and stays on when the master
headset is successfully connected with the remote headsets.
3. Red nameplate: Master headset Blue nameplate: Remote headset
① ① Install the batte.
Step 1: Slide the batte
compament cover lock.
Step 2: Open the cover. Step 3: Place the batte into the
compament and close the cover.
② Turn on the master headset and remote headsets.
Master Headset Staup
③ Turn on the microphone.
④ The Solidcom C1 Pro system is now ready for use.
Direction for muting the microphone
Move the microphone boom upwards clockwise. Move the microphone boom upwards counterclockwise.
Nameplate
Power Toggle
80°
85° 85°
110°
80°
85° 85°
110°
7

8
Pairing
The master headset is paired with the remote headsets at the facto. They are ready for use right out of box.
Manual pairing is only required when a new headset is added to the system. During the pairing process,
all the headsets must be turned ON and connected.
Pairing steps:
1.P ress and hold the A button on both the master headset and remote headsets for 5 seconds. Pairing is
completed when the indicator light on each microphone boom stops ashing and stays ON.
2 .O ne master headset can be paired with up to 7 remote headsets..
Solidcom C1 Pro is highly versatile and can be applied in a variety of usage scenarios.
For more information about how to operate this system, please visit
https://hollyland-techhelp.zendesk.com/hc/en-us/categories/360005064994-Download.

Parameters
Transmission Range 1,100ft (350m) LOS
Frequency Band 1.9 GHz (DECT) (varies by count and region)
Modulation ModeGFSK
TX Power
RX Sensitivity <-90dBm
Batte Capacity 700mAh（2.66Wh）
Operation Time
Remote headset: >10 hours (when ENC is turned ON)
Master headset: >5 hours (when ENC is turned ON and the master
headset is connected with 5 remote headsets)
Master headset: >4 hours (when ENC is turned ON and the master
headset is connected with 7 remote headsets)
Charging Time About 2.5 hours
Frequency Response
ENC OFF: 150Hz–7kHz (±6dB)
ENC ON: 150Hz–7kHz (±10dB in the frequency range of
2kHz–5kHz and ±6dB in the other frequency ranges)
Signal-to-Noise Ratio 73±2dB@94dBSPL，1KHZ
Distoion ＜ 1% @94dBSPL，150HZ~7KHZ
Microphone Type Electret
Input SPL >115dBSPL
Output SPL 98±3dBSPL (@94dBSPL, 1kHz)
ENC
>15dB with two microphones (relative to environmental noise in all directions)
Net Weight About 170g (6oz) with batteries included
Temperature Range 0℃ to 45℃ (working condition)
–20℃ to 60℃ (storage condition)
Note: The frequency band and TX power va by count and region.
9
19.18dBm(FP) ,17.94dBm(PP)

10
Safety Precautions
Do not place the product near or inside heating devices (including but not limited to microwave ovens,
induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to
prevent the batte from overheating and exploding.
Do not use non-original charging cases, cables, and batteries with the product.
The use of non-original spare pas may cause electric shock, re, explosion, or other dangers.
Suppo
If you encounter any problems in using the product or need any help, please contact Hollyland Suppo
Team via the following ways:
Statement
All copyrights belong to Shenzhen Hollyland Technology Co., Ltd.
Trademark Statement
Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no organization or individual
may copy or reproduce pa or all of any written or illustrative content and disseminate it in any form.
Note:
Due to product version upgrades or other reasons, this Quick Guide will be updated from time to time.
Unless otherwise agreed, this document is provided as a guide for use only. All representations,
information, and recommendations in this document do not constitute warranties of any kind,
express, or implied.

Any changes or modications not expressly approved by the pay responsible for compliance could
void the user's authority to operate the device. This device complies with Pa 15 of the FCC Rules.
Operations are subject to the following two conditions:
(1) This device may not cause harmful inteerence.
(2) This device must accept any inteerence received, including inteerence that may cause undesired
operations.
The device has been tested and complies with FCC SAR limits.
FCC Requirement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant
to Pa 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
inteerence in a residential installation. This device generates, uses, and can radiate radio frequency
energy, and if it is not installed and used in accordance with the instructions, it may cause harmful
inteerence to radio communications. However, there is no guarantee that inteerence will not occur
in a paicular installation. If this device does cause harmful inteerence to radio or television reception,
which can be determined by turning the device o and on, the user is encouraged to t to correct the
inteerence by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the distance between the device and the receiver.
–Connect the device to an outlet on a circuit dierent from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Note:
11
Safety Precautions