Hollyland MARS 400S PRO User manual

MARS 400S PRO
User Manual
V1.0.0

1
Thank you for purchasing Hollyland Mars 400S PRO Wireless HD Video Transmission
system. Please kindly read this manual carefully before using it. Hope you have a
pleasant experience.
400ft Transmission Range between TX and RX(LOS)
300ft Transmission Range between TX and APP(LOS)
Integrated Cold Shoe for Quick Installation
Lowest Transmission Latency 0.08s
SDI Input & HDMI Input at TX
SDI Output & HDMI Output at RX
Supports DC Power Supply, USB Type-C Power Supply and Battery Power Supply
1 Transmitter Supports 2 Receivers(1 Transmitter Supports 1 Receiver and 2 APPs
Monitoring, or 1 Transmitter Supports up to 4 APPs Monitoring Without Receiver)
Supports Smart Channel Selection
Supports APP Firmware Upgrade
Direct Data Stream from RX for Live Streaming
FOREWORD
KEY FEATURES

2
Transmitter x1
①
Receiver x1
②
Antenna x5
③
x1
④
User Guide
⑤
DC Adapter
x1
⑤
① ② ③
④
PACKING LIST
1 TX WITH 1 RX PACKING

3
x1
①Receiver
x3
②Antenna
x1
③
x1
④User Guide
DC Adapter
①②③④
PACKING LIST
SINGLE RECEIVER PACKING

4
MONITOR
PAD
PHONE
TYPICAL SETUP
1 TX-1 RX SETUP

5
MONITOR
MONITOR
TYPICAL SETUP
1 TX-2 RX SETUP

6
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
A
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
B
PRODUCT INTERFACES

7
①Antenna Interface
②Fan Air Outlet
③
④OLED Display Screen
SDI Input
A
⑤UP
⑥OK
⑦DOWN
⑧Cold Shoe
⑨USB Type-C Interface
⑩Power Switch
⑪HDMI Input
⑫DC Input
①Antenna Interface
②Fan Air Outlet
③
④OLED Display Screen
SDI Output
B
⑤UP
⑥OK
⑦DOWN
⑧Cold Shoe
⑨USB Type-C Interface
⑩Power Switch
⑪HDMI Output
⑫DC Input
PRODUCT INTERFACES
TRANSMITTER RECEIVER

8
①
②
④
⑤
③
INSTALLATION

9
Install the antennas as demonstrated.
①
Secure the cold shoe with 1/4 screw hole at the bottom of the transmitter and mount
it to the camera.
②
Connect the HDMI input or SDI input of the transmitter with camera's by HDMI or SDI
cable.
③
④
Turn on the devices.
⑤
Connect to a power supply(compatible with NP-970 battery or the same series of the
batteries).
INSTALLATION

A
E101010
CH2
1080P60
8.1v
B
① ②
③
④
⑤
⑥
⑦
⑨⑧
③
④
⑤
⑥
⑦
① ②
①Device Number
②WIFI Signal Strength
③
④USB Flash Detection Indicator
Scene Mode
⑤Device ID
⑥Channel Display
⑦Video Format
⑧Fan Status
⑨Battery Voltage Display
①Device Number
②WIFI Signal Strength
③
④USB Flash Detection Indicator
Scene Mode
⑤Device ID
⑥Chanel Display
⑦Video Format
⑧
10
OLED DISPLAY
A B
TRANSMITTER RECEIVER
8.1v
⑨⑧
⑨
Fan Status
Battery Voltage Display

11
E101010
CH2
1080P60
E101010
CH2
1080P60
１.This device supports several power methods, and the device will be charged by the
method which has a higher voltage.
* The picture on the left shows the symbol of Type-C power supply, the picture on the
right shows the symbol of DC power supply.
OLED DISPLAY
CAUTION

12
Long press the “OK” button for 3 seconds to enter the root menu interface. Click “UP”
and “DOWN” button to switch menu options, click “OK” to confirm.
Press the button “ UP/DOWN” on the transmitter or the receiver to change the current
channel. Press “OK” to confirm the channel number, then the channel of the receiver and
the transmitter will be synchronously and automatically changed.
1.Confirm there is video format display on both transmitter and receiver. Use the Type-
C to Lan Connector to connect the laptop and RX.
2.Go to the network settings onthe laptop and set it to DHCP mode.
3.Go to your live stream software, such as VLC Player, OBS Studio, Vmix, etc., and
open the network video source via the RTSP URL: rtsp://192.168.218.25:5554.
ENTER MENU
CHANNEL CHANGE
PULL STREAM FROM RECEIVER
QUICK GUIDE
PC

QUICK GUIDE
1.“HollyView” APP Download
2.Connecting Method:
Enter the WiFi connection interface of mobile phone and find out the WiFi named as
"HLD + DEVICE ID", and input the WiFi password to connect (Factory Defult Password
is: 12345678). After successful connection, you can have the APP monitoring.
APP DOWNLOAD AND CONNECTION
13

<11W
206g
(L*W*H): 110*72*33.5mm
(The Battery Plate Exclude)
Maximum 21dBm
/
5GHz
HDMI Input(Type A Female)
SDI Input
2* Antenna Interfaces (RP-SMA Male)
DC Input
USB Type-C
DC Power Input:6-16V
USB Type-C Power Supply:5V/2A
Battery Power Supply:6-16V DC
HDMI:
480p60
576p50
720p50/59.94/60
1080i50/59.94/60
1080p23.98/24/25/29.9/30
1080p50/59.94/60
SDI:
1080p60/59.94/50(Level A)
1080p60/59.94/50(Level B)
1080i60/59.94/50
1080p30/29.97/25/24/23.98
1080PsF25
720p60/59.94/50
1080PsF24/23.98
OFDM
14
20MHz
0.08s
<7W
206g
/
-80dBm
5GHz
HDMI:
480p60
576p50
720p50/60
1080i50/60
1080p24/25/30
1080p50/60
SDI:
1080p60/50(Level A)
1080i60/50
1080p30/25/24
720p60/50
1080i50(1080PsF25/24/23.98input)
1080i60(1080PsF30/29.97input)
OFDM
20MHz
0.08s
PRODUCT PARAMETERS
Transmitter Receiver
Supply Interfaces
Power Consumption
Weight
Dimension
Input / Output
Video Format
Frequency
Modulation Mode
Transmission Power
Receiver Sensitive
Transmission Latency
Bandwidth
HDMI Output(Type A Female)
SDI Output
2* Antenna Interfaces (RP-SMA Male)
DC Input
USB Type-C
DC Power Input:6-16V
USB Type-C Power Supply:5V/2A
Battery Power Supply:6-16V DC
(L*W*H): 110*72*33.5mm
(The Battery Plate Exclude)
Interfaces

15
FAE
If encounter any problems in using the product or need any help,please follow these
ways to get more technical support:
[email protected]

[e-mail]