Holman 48401 User manual

Holman
Rancho Cordova, CA 95742
800-343-7486
InstallationSuppor[email protected]
20230801R2 DATE: __________________
Installation Guide
48401

Instructions –48401
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 1
PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO
ASSEMBLING, INSTALLING, AND USING THIS PRODUCT.
Warning
Always check for wires, fuel tanks and lines, brake lines and other important
vehicle functionality items prior to drilling and installing all products.
Tools Needed
7/16” Wrench and Socket
Table of Contents
Before You Begin ............................................................................................................................1
Parts List..........................................................................................................................................1
Hardware.........................................................................................................................................2
Installation .......................................................................................................................................2
Vehicle Installation Notes ................................................................................................................3
Before You Begin
Read all instructions prior to installing any Holman product.
Be sure to have the shelf unit you are installing into assembled prior to installation.
Parts List

Instructions –48401
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 2
Hardware
Installation
Set shelf on its front.
Slide riser over rear bottom edge, aligning holes in riser with holes in shelf.
Using three 1/4” x 3/4” hex bolts, six 1/4” washers, and three 1/4” lock nuts, securely fasten riser
to shelf side.
Repeat for opposite side of shelf.
Go back and ensure all hardware is tight.

Instructions –48401
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 3
INSTALL SHELF PER SHELF
MOUNTING KIT
INSTALLATION
INSTRUCTIONS.
ASSEMBLY IS COMPLETE.
Shelf Installation Notes
When installing a shelf with shelf riser kit,
be sure to install to the floor using at least
two holes in each shelf riser, as shown.
NOTE: Installation hardware is included in
the appropriate shelf mounting kit.