Holmes Hawf-2072 User manual

For your own records, staple or attach your sales receipt to this manual.

Also, please take a moment to write the store name/location and

date purchased below.

STORE NAME

LOCATION:

DATE PURCHASED:

Five (5) Year Limited Warranty

SAVE THIS WARRANTY INFORMATION

A. The quality controls used in the manufacture of this Holmes© product

are to ensure your satisfaction.

B. This Warranty applies ONLY to repair or replacement of any supplied or

manufactured parts of this product that, upon inspection by Holmes

authorized personnel, proves to have failed in normal use due to

defects in material or workmanship. Holmes will determine whether to

repair or replace the unit. This Warranty does not apply to installation

expenses.

C. Operating this unit under conditions other than those recommended or

at voltages other than the voltage indicated on the unit, or attempting

to service or modify the unit, will render this WARRANTY VOID.

D. Unless otherwise proscribed by law, Holmes shall not be liable for any

personal injury, property or any incidental or consequential damages of

any kind (including water damage) resulting from malfunctions,

defects, misuse, improper installation or alteration of this product.

E. All parts of this Holmes product are guaranteed for a period of 5 years

as follows:

1. Within the first 30 days from date of purchase, the store from which

you purchased your Holmes product should replace this product if it is

defective in material or workmanship (provided the store has in-stock

replacement.)

2. Within the first sixty months from date of purchase, subject to the con-

ditions in paragraph G, Holmes will repair or replace the product if it is

defective in material or workmanship providing it is returned to

Holmes, freight prepaid, with PROOF OF PURCHASE date, together with

$12.50 for handling and return packing/shipping charges.

F. If you have any problem with this product, please write our Customer

Service Dept., or call, 1-800-5-HOLMES.

G. IMPORTANT RETURN INSTRUCTIONS Your warranty depends on your

following these instructions if you are returning the unit more than 30

days after the date of purchase:

1. Carefully pack the item in its original carton or other suitable box to

avoid damage in shipping.

2. Before packing your unit for return; be sure to enclose:

a) your name, full address with zip code and telephone number,

b) a dated sales receipt or PROOF OF PURCHASE,

c) your $12.50 check for return shipping and handling charges, and

d) the model number of the unit and the problem you are having.

(Enclose in an envelope and tape directly to the unit before the box is

sealed.)

3. Holmes recommends you ship the package U.P.S. ground service for

tracking purposes.

4. All shipping charges must be prepaid by you (as noted in paragraph E).

5. Ship to: HOLMES PRODUCTS CORP.,CUSTOMER SERVICE

DEPARTMENT, 233 FORTUNE BLVD.,

MILFORD MA 01757

SHIPPING AND HANDLING CHARGES: $12.50

This warranty gives you specific legal rights, and you may have other

rights which vary from state to state. The provisions of this warranty are

in addition to, and not a modification of, or subtraction from, the statutory

warranties and other rights and remedies contained in any applicable leg-

islation. To the extent that any provision of this warranty is inconsistent

with any applicable law, such provision shall be deemed voided or amend-

ed, as necessary, to comply with such law.

Owner’s Guide

☎INFO HOT-LINE: If, after reading this owner’s guide you have any questions or comments, please call 1-800-5-HOLMES and a

Customer Service Representative will be happy to assist you.

PLEASE READ AND SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety precautions should always

be taken including the following:

• Use fan only for purposes described in the instruction manual.

• To protect against electrical shock do not immerse unit, plug or cord in

water or spray with liquids.

• Close supervision is necessary when any appliance is used by or near

children.

• Unplug from outlet when not in use, when moving fan from one loca-

tion to another, before putting on or taking off parts, and before cleaning.

• Avoid contact with moving parts.

• Do not operate in the presence of explosive and/or flammable fumes.

• Do not place fan or any parts near an open flame, cooking or other

heating appliance.

• Do not operate any appliance with a damaged cord, plug, after the

appliance malfunctions, or has been dropped/ damaged in any manner.

• The use of attachments not recommended or sold by the appliance

manufacturer may cause hazards.

• Do not use outdoors.

• Do not let the cord hang over the edge of a table , counter, or come in

contact with hot surfaces.

• To disconnect, grip plug and pull from wall outlet. Never yank on cord.

• Always use on a dry, level surface.

• Do not operate without fan grills properly in place.

• This product is intended for household use ONLY and not for commer-

cial or industrial applications.

PLEASE READ AND SAVE THESE INSTRUCTIONS

WARNING: To reduce the risk of fire or electrical shock, DO NOT

USE THIS FAN with any SOLID STATE Fan Speed Control Device

THIS PRODUCT IS EQUIPPED WITH A POLARIZED A.C.

(Alternating Current) PLUG (a plug having one blade

wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If

you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact an electri-

cian to replace the obsolete outlet.

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG

Page1

HASF-2072-97-01-QVC Printed in China

Page 4

HAWF-2072

OSCILLATING

TTWW

WWII

IINN

WWII

IINN

NNDD

DDOO

OOWW

FFAA

AANN

FIGURE 3

THERMOSTAT INSTRUCTIONS:

Your window fan is equipped with a Comfort Control Thermostat that auto-

matically turns the fan ON and OFF depending on the preset comfort level.

This is ideal for operation at night when the temperature drops. It is

labeled Comfort Control.

• While the Window Fan is on, turn the

Comfort Control Thermostat dial to the left

toward the smaller dots until the fan (and

oscillation) stops (Away from Cooler). This

is the selected comfort level.

• If the fan is stopped and you want to turn

it back on, turn the Comfort Control Thermostat dial to the right

towards the larger dots until the fan starts, (Towards Cooler). SET DIAL

TO DESIRED SHUT-OFF POINT. Turning dial (as noted above) helps you

locate the prevailing temperature on the dial.

IMPORTANT: If you desire continuous running of the fan, the Comfort

Control Thermostat dial should be turned all the way to the right to the

largest dot.

• WARNING: BE SURE FAN IS SECURELY INSTALLED IN YOUR WINDOW

AT ALL TIMES. DO NOT LEAN OR PUSH ON FAN WHILE IT IS IN THE

WINDOW.

CLEANING/MAINTENANCE INSTRUCTIONS:

Follow these instructions to correctly and safely care for your Holmes®

window fan.

Please remember:

• Always unplug the fan before cleaning or disassembling.

• Do not allow water to drip on or enter into the fan housing.

• Be sure to use a soft cloth moistened with mild soap solution.

• Do not use any of the following as a cleaner: gasoline, thinner, or benzine.

Fan Blade and Front Grill Cleaning:

To clean fan blade and front grill

1. Using a phillips head screwdriver, remove the screws that hold the front

and rear grills together.

2. Clean blades and grills with a soft, moist cloth (see above).

3. Securely fasten the grills together.

FAN SERVICE INSTRUCTIONS:

1. Do NOT attempt to repair or adjust any electrical or mechanical func-

tions on this unit. Doing so will void the warranty.

2. If you have any questions regarding this unit’s operation or believe any

repair is necessary, please call 1-800-5 HOLMES to speak with a

Customer Service Representative.

3. If you need to exchange the unit, please return it in its original carton,

with a sales receipt, to the store where you purchased it. If you

are returning the unit more than 30 days after the date of pur-

chase, please see the enclosed warranty.

4. If you have any other questions or comments, feel free to write us:

Holmes Products

P.O. Box 769

Milford, MA 01757-0769

PRE-INSTALLATION INSTRUCTIONS:

Carefully unpack all contents of carton.

• The window fan comes fully assembled and is ready for immediate

installation.

• Before installation, familiarize yourself with the built-in 5”extender

on the right side of the fan, and the two additional 3.5” extenders

which attach to the left side of the fan housing (see figure #1.) The

extra extenders are packed in styrofoam at each end of the box.

WE RECOMMEND KEEPING YOUR WINDOW SCREEN IN PLACE

INSTALLATION INSTRUCTIONS:

This window fan has been designed to fit double-hung, slider and case-

ment windows with minimum openings of 24” wide and 14.5” high. For

casement windows, please see above, right column for information on

available bracket. This fan is designed and recommended for used with

your window screen in place.

For double-hung and slider windows:

NOTE: On SLIDER WINDOWS the bottom section must be the side you

add extenders to (left side). The controls should be facing toward the

window.

1. With the window open, take an accurate measurement of the open-

ing where the unit will be placed.

2. Match your window measurement with the installation guide (see

figure #2 text); adding the appropriate extender panel(s) to

the left side, while using the

built-in extender on the right

side.

3. Once you have added extender

panel(s) if necessary, set the

fan in the window, and com-

plete the installation process

using the built-in extender.

Pull out for a snug, safe fit

(see step 5)

4. Carefully close the window onto

the top of the fan so that the

bottom edge of the window

rests behind top line of fan

housing. This is important as

it aides in keeping the fan in

place.

5. Lastly, pull out the built-in extender on right side to fill in the

remaining space. To pull out, simply pop up the extender lock

on the top of the fan housing next to the built-in extender, and

set to the desired length. To secure in place, push the extender

lock back down.

Casement Windows:

For a safe, secure fit in your casement window, you will need a special

bracket system. For easier installation in a casement window, we will

provide you with two brackets and screws at no additional cost. Please

keep in mind, your window must to be at least 24” high and 14.5” wide

to use this window fan/bracket combination. Please call our customer

service department, 1-800-5-HOLMES, for further assistance.

INSTALLATION GUIDE:

For 24” to 27”: Use up to 3” of right side, pull out extender.

For 28” to 32”: Use one 3.5” extender panel on the left side. Adjust

the pull out extender on the right side for a tight fit (from .5” to 5”)

For 32” to 36”: Use two 3.5” extender panels on the left side. Adjust

the pull out extender on the right for a tight fit (to 5”)

Larger than 36”: Additional extender panels will be required.

To order additional extenders, see mail order offer or call 1-800-5-HOLMES

OPERATING INSTRUCTIONS:

• Make sure rotary switches are in the OFF position.

• Plug into 120V AC electric outlet.

• Set the individual fan motors on either INTAKE or EXHAUST using

the control lever.

• To start the unit, turn the rotary switches to desired speed (HI, MED,

LO, SLEEP). Note: • If unit will not start, please check that Comfort

Control Thermostat is set to HI/largest dot. (Figure 3)

• When operating both fans on EXHAUST, set the Comfort Control

Thermostat all the way to high by turning the dial to the right

toward the largest dot.

• To start oscillation, simply move the Oscillation Switch to the ON

position. The oscillation system is powered by its own separate

motor; therefore, both fans will oscillate when the feature is turned

ON (you can set each individual fan to any speed you desire, includ-

ing OFF, and both fans will oscillate.) To end oscillation, move the

switch to the OFF position.

Note: Remember to turn the oscillation switch to OFF when fan is not in use.

Page2 Page 3

Figure 1

A. Slide-on Extenders

B. Left Fan Speed Control

C. Left Fan Intake Exhaust

D. Oscillation Control

E. Comfort Control Thermostat

PULLS OUT UP TO 5.0”

LEFT

Extra Extender Panels RIGHT

Built-In, Pull Out Extender

UNIT’S LENGTH

24”

FRONT VIEW

Figure 2

Two 3.5” extenders, (Included in your box packed at both ends)

COMFORT CONTROL

F. Right Fan Intake/Exhaust

G. Right Fan Speed Control

H. Extender Lock

I. Built-in Extender (not shown)

ABCDFGH

FIGURE 2

LO HI

COMFORT CONTROL

FIGURE 3

THERMOSTAT INSTRUCTIONS:

Your window fan is equipped with a Comfort Control Thermostat that auto-

matically turns the fan ON and OFF depending on the preset comfort level.

This is ideal for operation at night when the temperature drops. It is

labeled Comfort Control.

• While the Window Fan is on, turn the

Comfort Control Thermostat dial to the left

toward the smaller dots until the fan (and

oscillation) stops (Away from Cooler). This

is the selected comfort level.

• If the fan is stopped and you want to turn

it back on, turn the Comfort Control Thermostat dial to the right

towards the larger dots until the fan starts, (Towards Cooler). SET DIAL

TO DESIRED SHUT-OFF POINT. Turning dial (as noted above) helps you

locate the prevailing temperature on the dial.

IMPORTANT: If you desire continuous running of the fan, the Comfort

Control Thermostat dial should be turned all the way to the right to the

largest dot.

• WARNING: BE SURE FAN IS SECURELY INSTALLED IN YOUR WINDOW

AT ALL TIMES. DO NOT LEAN OR PUSH ON FAN WHILE IT IS IN THE

WINDOW.

CLEANING/MAINTENANCE INSTRUCTIONS:

Follow these instructions to correctly and safely care for your Holmes®

window fan.

Please remember:

• Always unplug the fan before cleaning or disassembling.

• Do not allow water to drip on or enter into the fan housing.

• Be sure to use a soft cloth moistened with mild soap solution.

• Do not use any of the following as a cleaner: gasoline, thinner, or benzine.

Fan Blade and Front Grill Cleaning:

To clean fan blade and front grill

1. Using a phillips head screwdriver, remove the screws that hold the front

and rear grills together.

2. Clean blades and grills with a soft, moist cloth (see above).

3. Securely fasten the grills together.

FAN SERVICE INSTRUCTIONS:

1. Do NOT attempt to repair or adjust any electrical or mechanical func-

tions on this unit. Doing so will void the warranty.

2. If you have any questions regarding this unit’s operation or believe any

repair is necessary, please call 1-800-5 HOLMES to speak with a

Customer Service Representative.

3. If you need to exchange the unit, please return it in its original carton,

with a sales receipt, to the store where you purchased it. If you

are returning the unit more than 30 days after the date of pur-

chase, please see the enclosed warranty.

4. If you have any other questions or comments, feel free to write us:

Holmes Products

P.O. Box 769

Milford, MA 01757-0769

PRE-INSTALLATION INSTRUCTIONS:

Carefully unpack all contents of carton.

• The window fan comes fully assembled and is ready for immediate

installation.

• Before installation, familiarize yourself with the built-in 5”extender

on the right side of the fan, and the two additional 3.5” extenders

which attach to the left side of the fan housing (see figure #1.) The

extra extenders are packed in styrofoam at each end of the box.

WE RECOMMEND KEEPING YOUR WINDOW SCREEN IN PLACE

INSTALLATION INSTRUCTIONS:

This window fan has been designed to fit double-hung, slider and case-

ment windows with minimum openings of 24” wide and 14.5” high. For

casement windows, please see above, right column for information on

available bracket. This fan is designed and recommended for used with

your window screen in place.

For double-hung and slider windows:

NOTE: On SLIDER WINDOWS the bottom section must be the side you

add extenders to (left side). The controls should be facing toward the

window.

1. With the window open, take an accurate measurement of the open-

ing where the unit will be placed.

2. Match your window measurement with the installation guide (see

figure #2 text); adding the appropriate extender panel(s) to

the left side, while using the

built-in extender on the right

side.

3. Once you have added extender

panel(s) if necessary, set the

fan in the window, and com-

plete the installation process

using the built-in extender.

Pull out for a snug, safe fit

(see step 5)

4. Carefully close the window onto

the top of the fan so that the

bottom edge of the window

rests behind top line of fan

housing. This is important as

it aides in keeping the fan in

place.

5. Lastly, pull out the built-in extender on right side to fill in the

remaining space. To pull out, simply pop up the extender lock

on the top of the fan housing next to the built-in extender, and

set to the desired length. To secure in place, push the extender

lock back down.

Casement Windows:

For a safe, secure fit in your casement window, you will need a special

bracket system. For easier installation in a casement window, we will

provide you with two brackets and screws at no additional cost. Please

keep in mind, your window must to be at least 24” high and 14.5” wide

to use this window fan/bracket combination. Please call our customer

service department, 1-800-5-HOLMES, for further assistance.

INSTALLATION GUIDE:

For 24” to 27”: Use up to 3” of right side, pull out extender.

For 28” to 32”: Use one 3.5” extender panel on the left side. Adjust

the pull out extender on the right side for a tight fit (from .5” to 5”)

For 32” to 36”: Use two 3.5” extender panels on the left side. Adjust

the pull out extender on the right for a tight fit (to 5”)

Larger than 36”: Additional extender panels will be required.

To order additional extenders, see mail order offer or call 1-800-5-HOLMES

OPERATING INSTRUCTIONS:

• Make sure rotary switches are in the OFF position.

• Plug into 120V AC electric outlet.

• Set the individual fan motors on either INTAKE or EXHAUST using

the control lever.

• To start the unit, turn the rotary switches to desired speed (HI, MED,

LO, SLEEP). Note: • If unit will not start, please check that Comfort

Control Thermostat is set to HI/largest dot. (Figure 3)

• When operating both fans on EXHAUST, set the Comfort Control

Thermostat all the way to high by turning the dial to the right

toward the largest dot.

• To start oscillation, simply move the Oscillation Switch to the ON

position. The oscillation system is powered by its own separate

motor; therefore, both fans will oscillate when the feature is turned

ON (you can set each individual fan to any speed you desire, includ-

ing OFF, and both fans will oscillate.) To end oscillation, move the

switch to the OFF position.

Note: Remember to turn the oscillation switch to OFF when fan is not in use.

Page2 Page 3

Figure 1

A. Slide-on Extenders

B. Left Fan Speed Control

C. Left Fan Intake Exhaust

D. Oscillation Control

E. Comfort Control Thermostat

PULLS OUT UP TO 5.0”

LEFT

Extra Extender Panels RIGHT

Built-In, Pull Out Extender

UNIT’S LENGTH

24”

FRONT VIEW

Figure 2

Two 3.5” extenders, (Included in your box packed at both ends)

COMFORT CONTROL

F. Right Fan Intake/Exhaust

G. Right Fan Speed Control

H. Extender Lock

I. Built-in Extender (not shown)

ABCDFGH

FIGURE 2

LO HI

COMFORT CONTROL