Holtkamp DUO 8600 XL User manual

Operating instruction
DUO 8600 XL
Coin and chip card system

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 2 -
Südstraße 40 / D-49084 Osnabrück
[e-mail] /
www.holtkamp.de
Telefon: [phone], Fax: [phone]
Geschäftsführung: Magnus Michael; Sitz der Gesellschaft: Osnabrück, AG Osnabrück HRB 213567
Banken: Deutsche Bank Osnabrück, IBAN: DE28 2657 0090 0039 5251 00; SWIFT/BIC: DEUTDE3B265
Die Lieferung erfolgt zu unseren Allgemeinen Verkaufs- und Lieferbedingungen mit Stand April 2020. Es gelten unsere Einkaufsbedingungen mit Stand Januar 2020.
EU-Konformitätserklärung / European Union conformity explanation
Für das nachfolgend bezeichnete Erzeugnis / For the following designated product
Zeitsteuerung vom Typ / Time control type
DUO 8600/XL
mit Notaus-Timer (110%)-Funktion / with emergency stop timer (110%) function
wird hiermit bestätigt, dass die Bauart, in der von uns in Verkehr gebrachten Ausführung, den unten genannten Normen
entspricht.
It is hereby confirmed, that the construction in that execution brought by us in traffic corresponds to the standards specified
down.
Diese Erklärung gilt für alle Geräte, die nach den beiliegenden technischen Unterlagen, welche Bestandteile dieser Erklärung
sind, hergestellt werden.
This explanation applies to all devices, after the enclosed technical documents, which are components of this explanation,
are manufactured.
Einschlägige EG-Richtlinien / Relevant EC guidelines
RoHS-Richtlinie 2011/65/EU / RoHS Directive 2011/65/EU
1. 2006/95/EG (Niederspannungsrichtlinie)
2006/95/EG (low-voltage guideline)
geändert durch
changed through
2014/35/EU
2. 2004/108/EG (EMV-Richtlinie)
2004/108/EG (EMV guideline)
geändert durch
changed through
2014/30/EU
Angewendete harmonisierte Normen:
Applied one harmonized standards:
EN 60335-1 von 01/2012 (Sicherheit)
EN 60335-1 from 01/12 (security)
EN 55022 von 12/11 (Emissionen)
EN 55022 von 12/11 (emissions)
EN 61000-3, Teil 2 + 3 von (03/2015 und 03/2014) (Emissionen)
EN 61000-3, Teil 2 + 3 von (03/2015 und 03/2014) (emissions)
EN 61000-6, Teil 1 + 2 von (10/2007 und 03/2006) (Immunität)
EN 61000-6, Teil 1 + 2 von (10/2007 und 03/2006) (immunity)
Diese Erklärung ist bindend für den Hersteller
This declaration is binding on the manufacturer
Holtkamp Electronics GmbH
Südstraße 40 in 49084 Osnabrück
abgegeben durch:
Signature:
M. Hashemizadeh (EMV-Beauftragter)
..........................................
Osnabrück, den 01.09.2019

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 3 -
1 Legal information......................................................................................................................................................................... 4
2 Warranty ................................................................................................................................................................................ 4
3 Safety notices ............................................................................................................................................................................. 4
4 Devicespecicdata .................................................................................................................................................................... 4
5 Specications ............................................................................................................................................................................. 4
6 General details ............................................................................................................................................................................. 5
7 Illustrations ................................................................................................................................................................................ 5
7.1 Illustration of the devices.................................................................................................................................................... 5
7.2 Illustration of electronic....................................................................................................................................................... 6
8 Installation ................................................................................................................................................................................ 6
8.1 Installation notes................................................................................................................................................................. 6
8.2 Mounting notes................................................................................................................................................................... 7
8.3 Mounting instructions.......................................................................................................................................................... 7
8.4 Electrical connection........................................................................................................................................................... 7
 8.5 Operatingthersttime ....................................................................................................................................................... 8
8.5.1 LED operating light.................................................................................................................................................. 8
9 Specications .............................................................................................................................................................................. 9
10 Chip card types............................................................................................................................................................................ 9
11 Operating types ......................................................................................................................................................................... 10
12 General at programming ........................................................................................................................................................... 10
 12.1 Explanationoftheprogrampositions .............................................................................................................................. 10
 12.2 Basicprogrammingforoperatingmode“Timer”(factorysetting) ..................................................................................... 11
  12.2.1Time/pricemenu,cash=card“no” ............................................................................................................................. 11
  12.2.2Clockmenu................................................................................................................................................................. 15
  12.2.3Congurationmenu .................................................................................................................................................... 17
  12.2.4Buscongurationmenu .............................................................................................................................................. 21
13 Chip card revalue....................................................................................................................................................................... 22
 13.1 Personnelrevaluemode................................................................................................................................................... 22
 13.2 Cardrevaluingbycashinsertion(customeruse) ............................................................................................................ 22
14 Statistics .............................................................................................................................................................................. 23
14.1 Explaining the statistics values......................................................................................................................................... 23
 14.2 Enquiringthestatisticvaluesinoperationmode“Timer”.................................................................................................. 24
 14.3 Enquiringthecounterreadingsinoperatingmode"Revaluation" .................................................................................... 24
14.4 Cancelling the statistic values .......................................................................................................................................... 25
14.5 Enquiring the failure statistics........................................................................................................................................... 25
 14.6 Readoutthecode ............................................................................................................................................................. 26
14.7 Cancelling the failure statistics ......................................................................................................................................... 26
15 Not programmable special equipments ................................................................................................................................. 26
15.1 Electric contactor 2 x 20 A or 4 x 20 A on request ............................................................................................................ 26
 15.2 Extraconnectionfortimestop.......................................................................................................................................... 26
 15.3 Powerdependingtimestop.............................................................................................................................................. 26
15.4 Extra connection for cleaning button ................................................................................................................................ 26
 15.5 Internalshorttimeimpulseforwashingmachinedooropening ....................................................................................... 26
 15.6 Potentialfreerelaycontact............................................................................................................................................... 26
 15.7 Keyswitchforfreeuse ................................................................................................................................................... 26
 15.8 ConnectionpossibilityforCancelbutton .......................................................................................................................... 26
 15.9 Remoteindicationsincl.connectionpossibilityinDUOwithorwithoutremotestart........................................................ 27
16 By malfunctions ........................................................................................................................................................................ 28
Index .............................................................................................................................................................................. 30
Content
Important: For safe and proper use, read the instructions for use and further product-related documents carefully and keep
it for later use!
For errors, technical errors, printing errors and incompleteness, we assume no liability.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 4 -
1 Legal information
Allrightsreserved.Nopartofthismanualmaynotberepro-
ducedorcopiedinanyformwithoutpermissionofHoltkamp
ElectronicsGmbH.The rightsforcontained softwareincontrol
andmemoryblocksareexclusivelyfromthemanufacturer.
Thereadingandcopyingoftheprogramcontentisstrictlyprohi-
bited.TheHoltkampElectronicsGmbHisnotliabletothe
purchaserofthisproductorthirdpartiesfordamages,los-
ses,costsorexpensescausedbythebuyeroranythirdparty
due to accident, misuse or unauthorized alterations, repairs or
improvements.
TheHoltkampElectronicsGmbHshallremainliableforanyloss,
costs,disruptionsorconsequentialdamagesthatresultfromthe
use of the control.
Thetechnicaldataareuptodate.Misprints,errorsandmodi-
cationsexcepted.Oldermanualsarenolongervalidwiththe
publicationofthismanual.
ATTENTION:
The installation must be performed by authorized
personnel! Therefore, make sure that the installation
is carried out by an electronics specialist!
4 Devicespecicdata
After switching on the electricity on the display appears for
approx. 2 seconds: Holtkamp XXL X.x, below in the  second
row:T-Timer.Thisisinformationabouttheusedsoftwareversion
(XX.x)aswellastheoperatingtypeoftheDUO(T-Timer).
Thesedetailsaresubjectoftheadvanceddevelopmentofthe
DUOandyourorder.Forfurtherquestionsandordersthesede-
tails will constitute an advantage. Please note all the abbrevia-
tionsappearingonthedisplay,denitely,foranyothertechnical
requests,inthefollowinglist.
2 Warranty
Onthefunctionofthedeviceisgrantedforaperiodof12months.
Thewarrantyislimitedsolelytotechnicaldefectsoftheunit,it
can´tbeacceptedfurtherclaims.Furtherapplyourgeneral
termsandconditions,standofJune2011,forproductsand
servicesoftheelectricalindustry(ZVEI)-alsoseewebsite:www.
holtkamp.de.
Anyliabilityextinguishedbythemanipulationofthedevice.
3 Safety notices
Thecoin/chipcardboxesarebuiltaccordingtothepriorartand
therecognizedsafetyrules.
Nevertheless,itsusethreatstolifeandlimboftheuserorthird
parties,orcausedamagetothedeviceorotherequipmentdu-
ringuse.Usethedeviceonlyinperfectcondition,andin-
tended,safetyandtheriskofdanger,incompliancewiththe
instructionmanual!Doimmediatelyeliminateparticulardis-
orders,whichmaya󰀨ectsafety!Alwayskeeptheoperating
instructionsdirectlytothecoinbox!Note,inadditiontothe
userguide,thegenerallyapplicablelegalandothermandato-
ryregulationsrelevanttoaccidentpreventionandenvironmental
protection!
Performno changesand/ormodications to thecoin/chipcard
boxwithoutapprovalofthemanufacturer!Sparepartsmustmeet
therequirementsspeciedbythemanufacturer.Thisisguaran-
teedonlyfororiginalspareparts.
Do observe the in the user manual  specied  or  prescribed
deadlinesforrecurringmaintenanceintervals!Doprovidefor
thesafeandenvironmentallyfriendlydisposalofplasticparts
andelectronicreplacementparts!
Themanufacturerisnotliablefordamagecausedbyimpro-
peruse.Theuserbearstherisk.Intendedusealsoincludes
compliancewiththeoperatinginstructionsandcompliance
withtheinspectionandmaintenanceconditions.
5 Specications
After switching on the electricity on the display appears for
approx.2seconds:HoltkampXLX.x,belowinthesecondrow:
T-Timer. This is information about the used software version
(X.x)aswellastheoperatingtypeoftheDUO(T-Timer).These
detailsaresubjectoftheadvanceddevelopmentoftheDUOand
yourorder.
Locking no. (embossedonthekey)
Operatingtypeandsoftwareversion
(Thedisplayappearsitasnumber,2secondsafteractivate.)
Serialno.(writtenonthetypeplate)
Commission
Trader
Forfurtherquestionsandordersthesedetailswillconstitutean
advantage. Please note all the abbreviations appearing on the
display,denitely, for anyothertechnicalrequests,inthe follo-
wing list.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 5 -
6 General details
Casingmaterial galvanisedsteelplate2mm
Casing color powdercoatedwhiteRAL9016
Dimensions h300mmxw218mmxd141mm
Powersupply 230Vor24V,50/60Hz
Switchedpower 6,3Abycosphi=1
Power absorption 10VA
Cable entrance frombehind(3drilledholes)
Temperaturerange 0°C - 50°C
Protection class Iby230V~and/orIIIby24V~
Protectiontype IP 20
Weight(withemptycoin-bag) app.7,5kg
Weight(withfullcoin-bag) app. 15 kg
FusecircuitboardSI1 100mAT
FusemainrelaySI2 6,3AMT
Fuserun-outrelaySI3 6,3AMT
Attention: Fuses may only be replaced with the same value
Wereservetherighttotechnicalchangesintheproductionandtechnicaldevelopments.
7 Illustrations
7.1 Illustration of the devices
1
2
3
4
5
6
7
8
9
10
11
12
13
14
18
15
16
14
18
17
14
1519
20 21
1 Casing
2 Card slot
3 Coin slot
4 Coinrejectbutton
5 RESET,PLUS,
OK buttons
6 Coin return
7 Inscription area
8 Coinremoval
9 Lock
10 Coin bag
11 Fuseplate
12 Holesfor13
13 Securingbolts
14 Securingforthecasing
15 Cable entrances
16 Earthterminals
17 SBframe
18 Securingholes
19 Rearwall
20 LEDdisplay
21 LCD operating light

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 6 -
7.2 Illustration of electronic
CircuitboardXL2_V021230V~
JpFS=0 JpFS=
standard
Jumperremotestart(FS):
without function
abc
ab
13 14 15 16 17 1
2
3
4
5
6a,b,c
7a,b
8
9
8
8
10
11
12
8 Installation
8.1 Installation notes
Throughhighqualitymicro-electronicsisthedeviceabletore-
achahighstandardofreliabilityinthedailyuse.Onlyifthein-
stallationhasbeenprofessionallycarriedoutcanthedevicebe
guaranteed.
Please consider during the installation...
● Onlyauthorizedandqualiedelectricianscarryouttheins-
 tallationcomplyingwiththevalidVDE–regulations.
● Bythetimerswith230V~supplyvoltageisdenitelythe
 protectioncablerequired,bythetimers24V~(safetyex-
 tra-lowvoltage)protectinggroundingisneededasfunction
earth.
●Thattheoorcoveringisanti-staticandconductorcapable,
 to ensure a minimum of static change and so reducing
the danger to the electronics.
● Amalfunctionorbreakdownofthedevicecanbecaused
 bytheswitchingsparksoftherelaycontacts.Toreduce
 thesesparksappropriatesuppressioncombinationsmust
 beincludedparalleltotheprotectioncontacts.RCcombi-
 nationsforsparksreducingareonlya󰀨ectivebydirectpar-
 allelswitchingoftherelaycontacts.
● Thatthescreenedcontrolanddatacablearelaidsepara-
 telyfrommainscables.ThescreeningoftheDUOelectro-
 nicmustbeone-sideandlaidonPE.
●Thatthefeedlineareused,whichisfromabigcrosssection
 tosupplyboththeDUOandtheattachedelectricconsumer.
 Itshouldbeusedancrosssectionfrom1,5mm²atthemi-
 nimum.
1 Serialinterface
2 Connectionformultiplecoin
tester
3 Battery
4 Connectionforserialremote
 display
5 Connection for bridge switch
6a Additionalrelayfor110%-dis
connection
6b Mainrelay
6c Run-outrelay 
7a Fusemainrelay
7b Fuseleadrelay
8 Power connection
9 Potentialfreerelayconnection
10 PCB fuse
11 Connectionforfoilkeyboard
12 Connection for chip card contact
unit
13 Connectionforchipcardreject
14 Connectionforexternaltimer
15 DIPswitchno.1–4
16 Connectionforremotestart
17 Connectionfortimehold/
cleaning button
 Specialequipment

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 7 -
8.2 Mounting notes
● Thisdevicemayonlybemountedonasuitablesurface.
● Thedevicemustbesu󰀩cientlysecured,takeintoconsi-
 derationtheweightoftheinsertedcoins.Thereare6holes
 inthebackofthecasingtoaccomplishthemountingpro-
 cess.Screwsanddowelsareincludedbydelivery.
● Thedevicemustbemountedhorizontallyandverticallyto
 guarantee a awless function of the coin receiver. That
 meanstheangleofthedevicecanonlybemaximum2º,
 slopingforwardorbackward,aswellastotherightorthe
left.
●Thedevicemustbemountedperpendicularandhorizontally,
to avouch a faultless function of the coin acceptance.
 Thatimplies,thetiltangleofthedevicecanonlybemaxi-
 mal2°forwardsorbackwardsandmaximal2°totherightor
left.
● Theinputcablesarexedbythreedrilledholesintherear
 wall.ThedeviceiscorrespondingtoprotectiontypeIP20
 andmayonlybeusedindryrooms.Chooseacablecross
 sectionofthefeedlineadequatebig.Attendtherebythe
 connectedelectricalload.AttendtotheVDEguidelines.
8.3 Mounting instructions
● Shutdownthepowerinput,byactivatingtheimmobilising
 switch,thefuseoreventhemainsafetyfuse.
● Unlockandremovethecoinbox.
● Loosenthetwoscrewsofthefuseplate,removethefuse
plate and raise the casing so that it is possible to pull out
theelectrical connectors. Pullout theelectrical plugconnec-
 tionsandremovethecasingcompletely.
● Thewallplatehorizontalandverticallyalignwiththehelp
of a level.
The tilt angle can only be 2° now mark the drilled holes.
● Drilltheholesandinsertsuitabledowels.Throughtheholes
 “15”(seeimage1.1ofthedevice)ontherearwallconnect
 uptheelectricity.Withtheappropriatescrewssecurethe
 casingtightly.Nowreinstalltheelectricalconnections.
  Placethecasingonthexingbolts“14”.Asacountermea-
  sureplacethefuseplate,throughtheopeningoftheremo-
  vedcoinbox,onthexingbolts“13”andtightenwiththe
supplied screws.

8.4 Electrical connection
The electrical connection can only be carried out by
 authorizedandqualiedpersonnel!
TheelectricalconnectionhastobecarriedoutbythelocalVDE
regulations.Withapermanentconnection,anallpolemainsse-
paratorwithatleast3mmcontactgapmustbeused.Beforestar-
tingtheelectricthecorrespondingcircuitmustbedisconnected.
Shut down the mains input by activating the separator switch,
removethefuseorreleasethemainsafetyfuse.Mainsandlow
voltagecablemustbespacedapart.Lowvoltagecablesshould
begenerallyspacedasscreenedcables.

Control cable and remote start connection have to
be kept away from each other.

ATTENTION:
The installation must be performed by authorized
personnel! Therefore, make sure that the installation
is carried out by an electronics specialist!
Connection 230V Remote start
(potential free)

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 8 -
8.5 Operatingthersttime
IftheDUOisinstalledcompletely,youcantakeintooperationby
switchingonthecircuit.Assoonasthecircuitisactivated,appe-
arsinthedisplayaninformationabouttheoperationmodeofyou
DUOandabouttheusedsoftware.(e.g.HoltkampXLSoftX.x
T-TimerFree).TheDUOisnowreadyforoperationandcannow
beprogrammedasyoulike.Toensure,thattheprogramminghas
beencorrect,youshouldmakeadetailedtestrun.Afterthistest
run all counters should be deleted to receive a correct account.
Pleasemakesurethatyouradjustedmaintimeisappropriated
tothesunbed.Donotchoosethemaintimetoolong,becauseof
thedangerofthesunbedcustomer.Usetheadjustmentsetting,
to limit the maximum time and therefore limiting the maximum
accountofbuyablemaintimetoreducetoaminimumthedanger
tothecustomer.
8.5.1 LED operating light
WiththeLEDoperatinglightonecansee,ataglance,theopera-
tingstandoftheDUO.Duringtheleadtime:quickblinking;main
time:permanentlight;run-outtime:slowblinking.

March 2003 110% disconnection
After norm EN 60335-2-27/A11 (VDE 0700 part 27)
Beginning with 01 may 2003 all our XL devices are
equipped with the disconnection recommended by the
upper mentioned directions.
EN60335-2-27 The PCB of DUO is provided with a 110%-dis-
connection.Itmeans,thatanemergencystoptimeriscontrolled
by a third relay on the PCB. It guarantees the switching o󰀨 of
thesunbed,ifthemainrelayisnotswitchingo󰀨once,afterthe
expiredtime.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 9 -
9 Specications
DUO 8600 XL
controls1device(e.g.Sunbed)
Electronicmultiplecointester
Chip card contact unit withoutrejectmagnet
Chipcardrevaluationviakeyboard
bytheowner/personnelorpercashinsertbythecustomer
Leadtime
Maintime(1min.–4hours15min.)
Maximumtime
Overruntime
LCDdisplay (timea.infotextindication)
Programmingwith chip card
Timememory
Pricesettingcoinandchipcardamount
Minimumpayment/debit
HappyHour
Skintypedistinction
UV-Controltanningmanagement
Electronic cash counter
Electronic operating hours counter
Electronic service hours counter
Electroniccustomerscounter
Electronicde-/revaluecounter
Electronictokencounter,2times
Electric contactor 20 x 2 A
Timehold,cleaningbutton,deletebutton
Remotedisplay
Remotestart
Potentialfreerelaycontact
LED operating light
Design foil*
Chip cards see chip card brochure
included in the standard version
 Specialequipment
 bychoice/orincludedinthestandardversion
* availableinHoltkampdesign,onrequestwithcustomer-
 specicdesignfoilavailable
10 Chip card types
Therearevariouschipcardtypes,todistributetocustomers,as
ameansof paymentand to programthe standardand special
functions.
Chipkarte Typ
PIN-Card
Funktion
P11 aufwertbare Chipkarte für den Endkunden
P14 aufwertbareTest-ChipkartefürdenService-Techniker(Sekundenbetrieb)
P15 aufwertbareTest-ChipkartefürdenService-Techniker(Minutenbetrieb)
P33 ChipkartezumAbfragenderStatistikenundzumLöschenderTageszählwerke
(fürBetreiber/Personal)
P43 ChipkartezumAbfragenundLöschenderStatistiken(ausschließlichfürdenBetreiber)
P53 Menü-Programmier-Chipkarte(ausschließlichfürdenBetreiber)
P63 Uhren-Programmier-Chipkarte(ausschließlichfürdenBetreiber)
P73 ChipkartezurAktivierungderAufwertefunktion(fürBetreiber/Personal)
P83 ChipkartezumAufrufdesKongurationsmenüs(ausschließlichfürdenBetreiber)
Thefollowingtableistoexplainthedi󰀨erentchipcardtypes.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 10 -
11 Operating types
ByDUOyoucanselecttwooperatingtypesintheconguration
menu:
1. Timer operating:
 -foralltime-dependingprocesses
2. Revaluation operating:
 -forrevaluingofchipcardsbycoinsorbyrevaluationchip
  cardtype73
 -inthisoperatingmodetheDUOisexclusivelyasrevaluati-
on device to use
 -anunintentionalbuyoftimeisnotpossible
Therevaluationoperatingmodecanbeconguredinthree
di󰀨erenttypes:
Revaluation by inserting of coins:
 -Intime/pricemenuthepoint"revaluation-stepcard”mustbeset
  to“0”
 -Revaluationbyrevaluation-cardisnotpossible!
 -In conguration menu the point “EMP Revaluation” on
  “yes” 
 - Revaluationbyinsertingofcoinsispossible!
Revaluation, manual, by revaluation chip card type 73:
 -In the time/ price menu the point “revaluation-step card”
  mustbesetonavaluemorethan“0”
 -Revaluationbyrevaluationcardispossible!
 -Inthecongurationmenuthepoint“EMPRevaluation”must
  beseton“no”
 - RevaluationbyinsertingofcoinsisNOTpossible
Revaluation by both possibilities
 - Inthetime/pricemenuthepoint“revaluation-stepcard”must
  besetonavaluemorethan“0”
 -Revaluationbyrevaluationcardispossible
 -Inthecongurationmenuthepoint“EMPRevaluation”must
  beseton“yes”
 -Revaluationbycoinsispossible!
Ifthe DUOis in revaluation operating inthe no-loading opera-
tion,appearsonthedisplay“Revaluation”.Ifachipcardisput
in,thiscanberevaluatedbyinsertofcoins.Ifachipcardisto
berevaluatedbyhand,rstrevaluationmodeistobestartedby
putting in a revaluation card type 73. The revaluation process
functionsinthesamewayasthetimeroperation.Theprogram-
mingand statisticmenus are adapted on thisoperating mode.
Redundantpointsareomittedandneededpointsareadded.
12 General at programming
Theindividualprogrampositionscanbeaccessedinquickpass
(autorepeatfunction),forwardandbackward.Asfollowingneeds
tobeinsertedthewishedprogramcard.Ifyouwishtopassthe
menuquicker,youneedtokeeppushingtheokbutton.Iftheok
buttoniskeptpushedthemenuisowingforward.Besidethis
youcanalsoaccessthemenubackward(shortpushontheok
button,min.300ms/max.850ms).Ifyouhavepushedshortly
theokbutton,theautorepeatmenuisaccessedbackwards.By
shortpushingoftheokbuttonyoucanaccessthemenuagain
forward.
12.1 Explanation of the program positions
In programming mode of the DUO there are di󰀨erent menus:
time/pricemenu,clockmenu,congurationmenu,summer/win-
termenuandbuscongurationmenu.
FortheUV-Controlmenuanadditionalinstructionisrequired!
Please notice that some of the program positions must
be activated, to indicate the menu point. The menu
points are recognisable by the grey back
To program the time/price menu there are 2 possibilities:
 - byopeningthecasingandswitchingontheDIPswitch
  no.1(PROG),or
 - bypushinginthekeycardtype53.
InthiscasetheDIPswitchno.3(T063FREI)needsto be swit-
ched on, or else the card is blocked. (The switch may remain
switchedonalsoafterendingtheprogramming,youdonothave
toreopenthecasingforlaterprogramming).
Theprogramminghastobedoneby3buttonsonthefrontfoil.
ByRESET-andPLUS-buttonwillbechangedthevalues,byOk
buttonwillbesteppedontothenextmenupoint.


Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 11 -
12.2 Basic programming for operating mode
“Timer” (factory setting)
YourDUOhasbeenfactorysetwithstandardprogramming.The
programvaluesarewrittenintheappropriatedisplays.
12.2.1 Time/price menu, cash = card “no”
to call with: to quit with:
Isnon-existingachipcardtype53,youcanstartthemenualso
withchangeovertheDIPswitchesno.1and3on"on".
Iftheprogrammingisnished,youmustchangeonlyDIP
switchno.1on"o󰀨".
insert chip card
type53
pull out chip card
type53
Following menu options are successively programmable:
 Thegreydepositedmenuoptionsmustbeonlyactivatedin
 thecongurationmenuwithpaymenttype,otherwisethey
 donotappearbyprogramming.
Display ad Factory setting Description
Brightness 100% Thebrightnessisusedfortheilluminationofthedisplay.Thebrightnessisad-
justableinstepsof2%,from0%to100%.
Pre-runtime 2.00min Theleadtimeisthetimedi󰀨erencebetweenpaymentatthecoinorchipcard
timerandthestartoftheconnectingdevice.Itcanbeadjustedinstepsof5
seconds,toamaxof9min55sec.Thepre-runcount-downcanbeprematurely
interruptedbytheremote start.
Theremotestartgivesthepossibilitytoactivatebyanexternalbutton.2proce-
duresarepossible.Intherstcasetheleadtimeissetonlowerthan“0”.Inthis
casetheleadtimewasendedbypressingtheremotestartandthemain-time
startsimmediately.Inthesecondcasetheleadtimeisseton=“0”.Inthiscase
beginsthemain-time,rst,afteractivatingtheremotestart.Thiscanbecalled
asa forcedremote start. Shoulda connectedcustomer be operated without
delayandactivatingtheremotestart,thejumperFSmustbeactivatedon“0”
(seepictureofelectronic,chap.1.2.). 
The remote start has to be carried out, basically, potential free to the ex-
ternal tester on the tanning bed.
Maintime1 0:02:00min Themaintime1istheoperatingtimeofconnecteddevicewhichcanbebought
withcoinsorachipcard.Itisrecallableandprogrammableifanyadjustments
havebeenmadeinthecongurationmenu.(cash=card).Itcanbeadjustedin
1secondsteps,tomax.of99:00or1hr39min.Ifinthecongurationmodus
themenupoint”3 digits main time”isseton“yes”,themaintimecanbead-
justedupto255mininsecondssteps.
Maintime2 0:03:00min Themaintime2istheoperatingtimeoftheconnecteddevice,payablebycoins
orbychipcard.Itisalwaysactiveonthesecondstepofthevariouspayment
types.Itisrecallableandprogrammableifanyadjustmentshavebeeninthe
“Conguration menu“.Itcanbeadjustedin1secondsteps,toamax.of99:00
minor1hr39min.(seemaintime1)
Maintime3 0:04:00min Maintime3analoguemaintime2
Maintime
card 1
0:02:00min Maintimecard1is operating timeoftheconnecteddevice, payablebychip
card.Itisrecallableandprogrammableifanyadjustmentshavebeenmadein
the“Conguration menu“.Itcanbeadjustedin1secondsteps,toamax.of
99minor1hr39min.


Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 12 -
Display ad Factory setting Description
Maintime
card 2
0:03:00min Themaintimecard2istheoperatingtimeoftheconnecteddevice,payableby
chipcard.Itisalwaysactiveonthesecondstepofthevariouspaymenttypes.
Itisrecallableandprogrammableifanyadjustmentshavebeenmadeinthe
„Conguration menu”.Itcanbeadjustedin1secondsteps,toamaxof99
minor1hr,39min
Maintime
card 3
0:04:00min Maintimecard3analogueMaintimecard2
Maintime
cash 1
0:01:00min Themaintimecash1istheoperatingtimeoftheconnecteddevice,payable
bycash.Itisrecallableandprogrammable,ifanyadjustmentshavebeen
madeinthe„Conguration menu”.Itcanbeadjustedin1secondstep,to
max.of99minor1hr,39min.
Maintime
cash 2
0:02:00min Themaintimecash2istheoperatingtimeoftheconnecteddevice,payable
bycash.Itisalwaysactiveonthesecondstepofthevariouspaymenttypes.
Itisrecallableandprogrammableifanyadjustmentshavebeenmadeinthe
„Conguration menu”.Itcanbeadjustedin1secondsteps,toamax.of99
minor1hr,39min.
Maintime
cash 3
0:03:00min Maintimecash3analoguemaintimecash2
Maximumtime 0:00min Themaximaltimeisthelimitofthemaintime.Itisadjustableinminutesteps
toamax.of99min.or1hr39minutes.
The maximum time is the admissible tanning time, given by the producer
of the tanning beds. If the maximal time is follow-up, burnings threats!
If“0”minutesaresetup,thisfunctionisdeactivatedandthemaintimecanbe
boughtbychoice!Ifyoupaywithchipcard,themaximumtimeyoucanpayis
limitedbytheskintypeorbythersttanning,whichisdepositonthechipcard.
Themaximumtimeisadjustedontheabsolutelyhighestminutetimeamount
of all skin types (limit switching). It should be adjusted the minute value at
most,whichconformsofadoseof800J/m²(thisistoinferfromthemanualof
thetanningbed).
Run-outtime 3:00min Therun-outtimeistheadditionaltimeoftheventilatorofasunbed,afterthe
maintimehasrunout.Therefore,run-outtimerelay,dependingonhowlong
therun-outtimeisset,remainsonlongerthanthemaintime.Itisadjustablein
5stepstomax.of9:55minutes.
Price Thepriceo󰀨ersthepossibility,toprogramtheamount,payableforeachmain
time.Itisadjustablefrom0,1(EUR/SFr/…..)upto99,9(EUR/SFr/….)in0,1,10
or100stepsdependingonthedigitsaftercomma.Thefullpricemustbepaid
tobuyeachmaintime.
Card price 1 3.5EUR Thepriceo󰀨ersthepossibilitytoprogramtheamount,payableforeachmain
time.Itisadjustablefrom0,1(EUR/SFr/…..)upto99,9(EUR/SFr/….)in0,1;
10or100stepsdependingonthedigitsaftercomma.Thefullpricemustbe
paidtobuyeachmaintime.Thepriceisonlyapplicablebypayingbychipcard.
Card price 2 4.0EUR Analoguecardprice1,howeverthepricewhichbythesecondstepoftheva-
riouspaymenttypesisactive.
Card price 3 5.0EUR Analoguecardprice1,howeverthepricewhichbythesecondstepoftheva-
riouspaymenttypesisactive.
Cash price 1 3.5EUR Thecashpriceo󰀨ersthepossibilitytoprogramthecashpricerequiredfora
maintime.Itisadjustablefrom0,1(EUR/SFr/…)to9,99(EUR/SFr/…)in0,1
steps.Thefullpricemustalwaysbepaidtobuyeachmaintime.Thepriceis
applicableforpayingbycash.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 13 -
Display ad Factory setting Description
Cash price 2 4.0EUR Analogue cash price 1, however the price which by the second step of the
variouspaymenttypesisactive
Cash price 3 5.0EUR Analoguecashprice1,howeverthepricewhichbythethirdstepofthevarious
paymenttypesisactive.
Price step
card
1.0EUR Thepricestepcardo󰀨ersthepossibilitytousethefollowingdescribedfunc-
tions,byactivatedminimumpayment.BytherstpressofthePLUSkey,the
fullcardpriceisaccountedandthereforethefullmaintimesold.Withevery
furtherpressing,thesetvalueunderthepricestepcard,willbedeductedand
thecorrespondinglyproportionaltimewillbesold.
Revaluestep
card
1.0EUR Therevaluestepcardo󰀨ersthepossibilitytosettheamountfortherevalue
step, which in revalue mode with each pressing of the PLUS key, the card
is credited or with each pressing of the RESETkey,thecardisdebited.The
revalueis openedby insertingthe type73 card.With the revalue step card
adjusted to 0.0 EUR, the revalue mode is deactivated and by inserting the
type73card,anerrorcodeE35isdisplayed.Therevaluestepcardo󰀨ersthe
possibility,tosettherevaluestepsize.Shouldacreditcardberevaluated,the
revaluemenumustbeopenedbyinsertingthetypecard73.Afteracreditcard
hasbeeninserted,eachpressingofthePLUSkey,creditsthesetamountfrom
the credit card. Debiting with the RESETkeycanonlybemadeaccordingto
theexistingamountbeforedebiting.
BonusStep1 0.0EUR Withthebonusstep1issetacashamount.Ifbyinsertedcardtype11this
amountwillbevalued,additionaltothecontainingdebit,thebonusvaluewill
be credited on the card.
BonusStep2 0.0EUR Withthebonusstep2issetacashamount.Thisamountmustbebiggerthan
theoneinbonusstep1.Should,withthecardtype11inserted,thisamountbe
inserted,thenadditionaltotheinsertedcash,thevalueunderthesetbonus
amountwillbecreditedonthecard.Immediatelyabonusamount2iscredited,
thenautomaticallytherecentcreditedbonusamount1willbedebited!Soonly
the last bonus will be allowed.
BonusStep3 0.0EUR Withthebonusstep3issetacashamount.Theamountmustbebiggerthan
theoneinbonusstep2.Should,withthecardtype11inserted,thisamountbe
inserted,thenadditionaltotheinsertedcash,thevalueunderthesetbonus
amountwillbecreditedonthecard.Immediatelyabonusamount3iscredited,
thenautomaticallytherecentcreditedbonusamount2willbedebited!Soonly
the last bonus will be allowed.
Bonusamount1 0.0EUR Thebonusamount1willbecreditedadditionallyonatype11cardif,asmuch
cashhasbeeninsertedassetinthemenupointbonusstep1.
Bonusamount2 0.0EUR Thebonusamount2willbecreditedadditionallyonatype11cardif,asmuch
cashhasbeeninsertedassetinthemenupointbonusstep2.
Bonusamount3 0.0EUR Thebonusamount3willbecreditedadditionallyonatype11cardif,asmuch
cashhasbeeninsertedassetinthemenupointbonusstep3.
Serviceinterval1 0 hrs Theserviceinterval1o󰀨ersthepossibilitytonoteoperatinghours.Whenthe
servicehourcounter1reachestheoperatinghours,anexclamationmarkwill
beshownonthedisplayandsignalstheneedofservice.Bycancellingofthe
servicehourcounter1theexclamationmarkisalsodeleted.Theserviceinter-
valisadjustableinhourstepsupto999hours.If“0”hoursareset,thefunction
is disabled.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 14 -
Display ad Factory setting Description
Serviceinterval2 0 hrs The service interval 2 o󰀨ers the possibility for further note operating hours.
Whentheservicehourcounter2reachestheoperatinghours,anexclamation
markwillbeshown onthedisplayand signalstheneedof service.Bycan-
cellingtheservicehourcounter2theexclamationmarkisalsodeleted.The
serviceintervalisadjustableinhourstepsupto999hours.If“0”hoursareset,
the function is disabled.
Serviceinterval3 0 hrs Theserviceinterval3o󰀨ersthepossibilitytonoteoperatinghours.Whenthe
servicehourcounter3reachestheoperatinghours,anexclamationmarkwill
beshown onthe displayand signalsthe needof service. By cancelling the
hourscounter3theexclamationmarkisalsodeleted.Theserviceintervalis
adjustableinhourstepsupto999hours.If“0”hoursareset,thefunctionis
disabled.
Hours/
Minutes
no Indicatingthehours/minuteso󰀨ersthepossibilitytoshowthemaintimein
minutesandsecondsorinhours,minutesandseconds.
●If“yes”isset,thenthedisplaywillshowthetimeinhoursandminutes.
● If“no”isset,thenthedisplaywillshowthetimeinminutes.
Minimum
insert
yes Theminimuminserto󰀨ersthepossibilitytoconvert,underthepricesettings,
theminimumprice.Theminimumpriceistheamount,whichneedstobein-
sertedtoeachmaintime.Oncetherstmaintimehasbeenbought,inserting
morecoinspermitsthefurtherbuyingofthenextperiod.
●Byactivatingminimuminsertcanbeusedthefunction“pricestepcard”.
● If“yes”isset,istheminimuminsertactivated.
● If“no”isset,istheminimuminsertdeactivated.
HQLtime yes TheHQLTimeo󰀨ersthepossibilitytohinderthenewstartofamaintime,
duringtherun-outtime.Thenewlyboughtmaintimewillbeaccountedwith
theamountofremainingrun-outtimeofthepayment.Ifthisfunctionisnot
activatedthentherun-outtimeisimmaterial,themaintimewillstartassoon
asthepre-runtimehasended.Shouldthecompulsoryremotestartbeactiva-
ted(compulsoryremotestartactive,whentheleadtime=0),thedevicecan
bestartedwiththeremotestartbuttonaftertherun-outtimehasexpired.
● If“yes”isset,istheHQLtimeactivated.
● If“no”isset,istheHQLtimedeactivated.
Purchaselockby
OR
no Thepurchaselockbyrun-outo󰀨ersthepossibilitytoblockthebuyingofmain
timeduringtherun-outtime.Byactivatingthisoptionthecoininsertandchip
cardareblockedduringtherun-outtime.Buyingtimeduringrun-outtimeis
impossible.
● If“yes”isset,thepurchaselockbyrun-outisactivated.
● If“no”isset,thepurchaselockbyrun-outisdeactivated
Pre-runrelay no Thepre-runrelayo󰀨ersthepossibilitytoswitchthefanonatthebeginningof
thepre-runtime.Theyremainswitchedonuntilrun-outtimeisended.When
thepre-runtimeissetto0,thefanwillstartbyactivatingtheremotestartand
staysonuntiltheendoftherun-outtime.
● If“yes”isset,thepre-runrelayisactivated.
● If“no”isset,thepre-runrelayisdeactivated.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 15 -
12.2.2 Clock menu
to call with: to quit with:
Is non-existing a chip card type 63 non-existing, you can start
themenualso withchangeover the DIPswitchesno.3 and 4
on"on".
Iftheprogrammingisnished,youmustchangeonlyDIPswitch
no.4on"o󰀨".
The following menu options are successively programmable:
 Thisgreydepositedmenuoptionmustbeonlyactivated
 inthecongurationmenu,underpaymenttypewithHappy
 Hourpaymenttype,otherwiseitdoesnotappearbypro-
 gramming.
insert chip card
type63
pull out chip card
type63

Display ad Factory setting Description
CurrenttimeS 17:24:41 Thecurrenttimeo󰀨ersthepossibilitytosetthecurrenttimeanddate.
● BypressingtheRESET button the hours will be increased.
● BypressingthePLUSbuttontheminuteswillbeincreased.
Currentdayand
month
27.01 Thecurrentdayandmontho󰀨ersthepossibilitytosetthecurrentdayand
month.
● BypressingtheRESETbuttonthedayswillbeincreased.
● BypressingPLUSbuttonthemonthswillbeincreased
Currentyear 2012 Thecurrentyearo󰀨ersthepossibilitytosetthecurrentyear(between1990-
2089).
● BypressingtheRESETbuttontheyearswillbeincreasedindecades.
●BypressingthePLUSbuttontheyearswillbeincreasedyearafteryear.
Currentweekday Fr Thecurrentweekdayo󰀨ersthepossibilitytosetthecurrentday.
● BypressingthePLUSbuttontheweekdayswillbescrolled.
Autom.
Summertime^
yes Automaticsummertimeswitchingistobesetupon“yes”or“no”
yes:inthelastSundayofMarchthetimeissetautomaticonsummertime,in
last SundayofOctoberitwillbe automaticsetonwintertime.Thechanging
timingswillbe calculatedanddo nothaveto beset.At the beginningof the
summertimetheclockwillbesetupwith1hourforward(atnightfrom2:00
to3:00),attheendoftheseasontheclockwillbesetup1hourbackwards
(atnightfrom3:00to2:00).ThesetimingareinagreementwiththeEuropean
Unionsummertimeprocedure.Theyhavebeenimplementedbyotherstates
(stand2004.Furtherinformation:www.ptb.de,searchdomain“summertime”).
no:noautomaticsummertimesetting
Theswitchingtimeisonlyavailableandprogrammable,ifinthecongurationmenubythepaymenttypesaHappyHour
payment type has been activated! For further payment types are needed additional instructions.
Tosetswitchingtimes,onemustrstentertheswitchingtimefromthetari󰀨shouldbeactivatedandthenthetari󰀨which
will be activated.
Example:switchtime2shouldbeactivatedfromMondaytoFridayfrom10:00-14:00,afterthattari󰀨1shouldbeactivated.
Theswitchtimeisset:Monday-Friday1:10:00andthentari󰀨1:2.ThenentertimeswitchMonday-Friday2:14:00nowenter
aftertari󰀨2:1.
Byswitchingtimes,thehourswillbeincreasedbypressingtheRESETbutton.TheminuteswillbechangedbypressingPLUS
button.Apaymentisnotpossibleduringactivatedblockage.Thetari󰀨swillbechosenbythePLUSbutton.
^Countrys,whichdonothavesummertimeswitching,mustde-
activatethismenupointwith“no”.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 16 -
Display ad Factory setting Description
SwitchtimeMo-Fr1 **:** Firstswitchingtime(validfromMondaytoFriday)
Tari󰀨Mo-Fr1 *Firsttari󰀨(validfromMondaytoFriday).Thetari󰀨isfreelychosenbetweentari󰀨
1,2,3andblockage.(Apaymentisnotpossibleduringtheactivatedblockage.)
SwitchtimeMo-Fr2 **:** Secondswitchingtime(validfromMondaytoFriday)
Tari󰀨Mo-Fr2 *Secondtari󰀨(validfromMondaytoFriday).Thetari󰀨isfreelychosenbetween
tari󰀨1,2,3anblockage.(Apaymentisnotpossibleduringtheactivatedblocka-
ge).
SwitchtimeMo-Fr3 **:** Thirdswitchingtime(validfromMondaytoFriday)
Tari󰀨Mo-Fr3 *Thirdtari󰀨(validfromMondaytoFriday).Thetari󰀨isfreelychosenbetweenta-
ri󰀨1,2,3andblockage.(Apaymentisnotpossibleduringtheactivatedblocka-
ge)
SwitchtimeMo-Fr4 **:** Fourthswitchingtime(validfromMondaytoFriday)
Tari󰀨Mo-Fr4 *Fourthtari󰀨(validfromMondaytoFriday).Thetari󰀨isfreelychosenbetween
tari󰀨 1, 2, 3 and blockage. (A payment is not possible during the activated
blockage)
SwitchtimeSa1 **:** Firstswitchingtime(validSaturdayonly)
Tari󰀨Sa1 *Firsttari󰀨(validforSaturday).Thetari󰀨isfreelychosenbetweentari󰀨1,2,3
andblockage.(Apaymentisnotpossibleduringtheactivatedblockage).
…etc.AlsoforSaturdaysthereare4timeswitchesand4tari󰀨sprogrammable.
SwitchtimeSo1 **:** Firstswitchingtime(validforSundayonly).
Tari󰀨So1 *Firsttari󰀨(validforSundayonly).Thetari󰀨isfreelychosenbetween1,2,3
andblockage.(Apaymentisnotpossibleduringactivatedblockage).
…etc.AlsoforSundaysthereare4timeswitchesand4tari󰀨sprogrammable.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 17 -
12.2.3 Congurationmenu
to call with: to quit with:
Isachipcardtype83non-existing,youcanstartthemenualso
withchangeovertheDIPswitchesno.1,2and3on"on".
Iftheprogrammingisnished,youmustchangeonlyDIPswitch
no.1and2on"o󰀨".
Following menu options are successively programmable:
insert chip card
type83
pull out chip card
type83

Display ad Factory setting Description
Language* German The language o󰀨ers the possibility to set the typical country language. The
languageselectiondependsonthesoftwareanditismaybechosenbetween
versionA,B,C.Itmustbedenotedbyorder.
It can be selected following:
VersionA:German,French,Italian,Flemish
VersionB:English,Norwegian,Danish,Swedish
VersionC:Polish,Spanish,Croatian
Coin tester value
chan.X
Thesettingofthechannelvalueso󰀨ersthepossibilitytosetvalueoftheinser-
tedcoin/s–fortheDUO–individually.Itisalreadyfactorysetandadjustedto
thebuiltcointesterandmayonlybereadjustedforthereasonsgivenbelow:
● Ifacointesterforforeigncurrencyhasbeenbuiltin.
●If the value of the token should be changed.
Coin tester value
chan. 1
ThecointesterrevaluationChannel1o󰀨ersthepossibilitytosetthechannel
valueforchannel1.Thevaluingcanbesetin0,1stepsfrom0,0–25,5.With
theRESET-andPLUSbuttonyoucanchangethevalues,withtheOKbutton
youcanswitchovertothenextmenupoint.
By setting from 0,0 the coin tester will accept the coins but there will be
no time buying! If the coin should be blocked, this change should be set
up in the coin tester.
Coin tester value
chan.2…6
Analogue coin tester revaluation channel 1
*Thelanguageselectionisdependentfromtherespectivesoftwareversion.
Bytrespassingthecongurationmenudonotchange
anyvalues! Uncontrolled programmingcan´t befollow-
ed by your wished functions. In the worst case the de-
vice can be put out of function totally.
Setting the channel on the EMP 800.00 v 6
YourDUOhasbeenequippedwithanelectronicmulticoinac-
ceptor(EMP).Itcanrecogniseupto6di󰀨erenttypesofcoins.
Whenacoinhasbeeninserted,itonlyrealisesthatacoinhas
been inserted but it does not which value the coin should have.
Theevaluationishelpedbythechannelvalueprogram.
Theallocationofthechannelstothethrownincoinscanbein-
ferredfromthestickeronthesidecoveroftheelectronicmultiple
coinacceptor.Thereisthepossibilityofclosingindividualchan-
nels.Thusthecoinacceptanceisblocked.

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 18 -
...in the electronic multiple coin acceptor (EMP) … in DUO
1. coin was thrown in 2. coin is assigned the
channel in the EMP
3."Exitchannel"ofEMPisas-
signedthe"Entrance"of
DUO
4.the"entrance"ofDUOis
assigned(bythefactory
orindividually)theprograms
value
EUR0,50 1 E1 e.g.0,50EUR(bythefactory)
EUR1,00 2 E2 e.g.1,00EUR(bythefactory)
EUR2,00 3 E3 e.g.2,00EUR(bythefactory)
EUR0,20 4 E4 e.g.0,20EUR(bythefactory)
- 5 E5 e.g.free(bythefactory)
Holtkampstandardtoken 6 E6 e.g.3,50EUR(bythefactory)
Thecorrelationofthe channelstothethrown incoinsyoucan
alsoseeonthelabelonthecoverfromthecointester.
Itispossible,toblockedseveralcoins.Therebythecoinaccep-
tation is refused.
9 10 11 12 13 14 15 16
2,0EURO
wide
yes
2,0EURO
middle
yes
0,5EURO
wide
yes
0,5EURO
narrow
yes
1,0EURO
narrow
yes
Teach
function
no
EURO
yes
2,0EURO
narrow
yes
1 2 3 4 5 6 7 8
Token
standard
no
0,2EURO
wide
no
0,2EURO
middle
no
Token
contour
no
0,5EURO
middle
yes
1,0EURO
wide
yes
1,0EURO
middle
yes
Activating
coin accep-
tance
yes
InthebasicadjustmentoftheEMPthechannelsfor0,2Euroand
the tokens are closed.
You can enableand disable individualcointypeswiththehelp
ofcertainDIPswitchcombinations.Thereare16DIPswitches,
whicharenumberedaftertheupperimaging.
Therecognitionandevaluationrunsasfollowing…
1 - 8 9 - 16

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 19 -
● Strongtemperaturesuctuationsandmagneticeldscould
 a󰀨ecttheacceptancebehaviourofthecoinacceptor.
● Theremovingorinstallingofanelectronicmulticoinacceptor
 maybecarriedoutonlybypoweroutput.
Forsafetyreasonsamodicationofthefactorysetting
channel values are only possible, if DIP switch no. 1
and 2 on the XL-PCB adjusted to „on“ (upwards) at
 rstorbyusingofthecongurationcardtype83.
After changing the channel values you must set the
 DIPswitches1and2backto„o󰀨“(down).

Display ad Factory setting Description
Currency EUR Theadjustmentofcurrencyo󰀨ersthepossibility,tochooseunderthecurrency
abbreviation EUR; neutral (no abbreviation); PLN; SKr; Kn; GBP; DKr or Kr.
Thecurrencyabbreviationappearsonthedisplay.
Operatingmode Timer Coinandchipcardtimertime-controlled
Furtheroperatingmodes:
o Revaluation:seechapt.7.4
o Coinacceptor:Zusatzanleitungerforderlich
Paymenttype normal Bythepaymenttype"normal"youhavethepossibility,toadjustonepriceand
onetime.
Youcanchoosebetweenfollowingpaymenttimes:
Normal,HappyHourPrices,HappyHourTimes,HappyHourPrices+Times,
HappyHour2x7.
Youneedpossiblyaspecialmanualforadjustingofthepaymenttypes.
Autom.
summertime^
yes Automaticsummertimechangecanbesetto"yes"or"no".
yes: OnthelastSundayinMarch,thetimeisautomaticallychangedtosummer
time,onthelastSundayinOctober,itisautomaticallyresettowintertime.
Theswitchoverdatesarecalculatedandmustnottobeenteredthere-
fore.
Atthebeginningofsummertime,theclockwillbepresentedforonehour
(atnightfrom2:00to3:00),attheendofsummertimeitwillberesetby
onehour(atnightfrom3:00to2:00).Theseswitchoverdatescorres-
pond
tothesummertimearrangementsagreedintheEuropeanUnion.
Theywerealsotakenoverbymanyotherstates
no:noautomaticsummertimeswitching
Notes for the electronic multi coin acceptor
YourDUOisequippedwithanelectronicmultiplecoinacceptor.
Please consider the following noticing:
● Wellworn,dirty,damaged,falseandforeigncurrencycoins
will not be accepted.
● Ifanapparentlygoodcoinisnotaccepted,pleaseusean-
other coin.
● Neverinsertmorethanonecoinatthesametime.
● Pressthecoinreturnbuttontoreleasejammedcoins.
● Whennocoinsareaccepted,ashort(5seconds)breakof
the power input often helps.
● Usetheelectroniccointesteronlybetweentemperaturesof
 0ºC–50ºCandatrelativehumiditiesof20%-85%
Int. door opener no Theinternaldooropenero󰀨ersthepossibility,byinsertofachipcardorby
pressingtheRESETbutton,toreceive30secondsfreemaintime,e.g.to
openanelectronicwashingmachinedoor,aftertheregularmaintimehas
expired.Aftereachfunctionthisfunctionisdisabledforoneminute.
● If“yes”isset,thefunctionisactivated.
● If“no”isset,thefunctionisdeactivated.
Tokencounter Timer Thetokencountero󰀨ersthepossibility,toinstallafurthercounter,whichcounts
separatelytheinsertedtoken.(Elsetheamountsareaddedtothecashcoun-
ter). There is the possibility to activate 2 token.These indicate the value of
the EMP channel 5 and 6 to the token counter 5 and 6. Please notice that the
channel6oftheEMPisequippedforHoltkamptoken.Channel5istherefore
foryourowntokenequipped.
If you liked to use own tokens, our electronic coin tester must be pro-
grammed on these coins. Please absolutely to specify by your order!

Holtkamp Electronics DUO 8600XL techn. stand 05.2016 4033_05.2016 V01.2021
- 20 -
Display ad Factory setting Description
Tokenimpulsec.5 no ● If“yes”issetup,inthestatisticmenuwillbeshownthedailytoken
counterandtotaltokencounter.Thevalueoftokenhastobesetup
underthemenuitem"Coin tester valuing channel 5”.Factorysetting
isvalue“0”.
● If“no”Iset,thetokencounterisdeactivated.
Tokenimpulsec.6 no ● If“yes”issetup,inthestatisticmenuwillbeshownthedailytokencounter
andtotaltokencounter.Thevalueofthetokenison“3,5”factorysetup
andisputouttochannel6onEMP.Ifyouwanttochangethevalueofthe
Holtkamptoken,youwillhavetosetitupfrommenuitem“Coin tester
valuing”.
● If“no”Iset,thetokencounterisdeactivated.
Dailycounters yes Thedailycountersettingo󰀨ersthepossibilitytodisplayallthedailycounters
inthestatisticmenuornot.
● If“yes”isset,allavailabledailycounterswillbedisplayed.
● If“no”issetnodailycounterswillbedisplayed.
3digitsmaintime no The3digitsmaintimeo󰀨ersthepossibilitytoshowthemaintimein2or3digits
onthedisplay.
● If“no”isset,maintimewillbedisplayedin2digitsandsolimitedto99min
or1hour39min.
● If“yes”isset,themaintimewilldisplayedin3digits.
Memorylock no Thememorylocko󰀨ersthepossibilitytoobviatetherepeatedsaleofmaintime.
●If“yes”issetthemaintimecanbeboughtonlyonce.
●If“no”isset,canthemaintimerepeatablesold.
Mains failure fuse no The mains failure fuse o󰀨er the possibility that the main time remains even
afteramainsfailure.Afterthemainssupplyisrestoredagain,thedeviceswith
thestoredmaintimewillbeswitchedbackon,perrandomtimegenerator,to
preventamainsoverload.
● If “yes” is set, the same main times and prices apply irrespective if
paymentismadecashorbycard.
● If“no”isset,di󰀨eringmaintimesandpriceswillsetforpaymentcashor
bycard.
Cash=Card no Thesettingcash=cardo󰀨ersthepossibilitytoequalizethenormallydi󰀨erent
priceandmaintime,forpaymentwithcashorbycard.Becauseofthisthereare
fewerprogramstepstoadjustintheprice/timemenu.
● If“yes”issetthesamemaintimeandpricesapplyirrespectiveifpayment
ismadewithcashorbycard.
● If“no”issetdi󰀨eringmaintimesandpricescanbesetforpaymentwith
cashorbycard.
EMP revaluation yes ThesettingEMPrevaluationo󰀨ersthepossibilitytorevaluethecardsbycash
insertontheEMP.Thiswayyoucano󰀨eryourcustomersthepossibilitytore-
valuetheircardsindependently.Otherpossiblemotivationsarethemenuitems
“Bonus amount”and“Bonus step”.
● If“yes”issetthesamemaintimesandpricesapplyirrespectiveifpayment
ismadewithcashorbycard.
● If“no”issetdi󰀨eringmaintimesandpricescanbesetforpaymentwith
cashorbycard