
Instruction Manual
EN - Inflatable Figure
Part Description
A Inflatable figure
B Adaptor
C Fan
D Ropes
E Stakes
F LED
G Weight-bag
Important: Please read all instruction carefully before using this product.
Caution: Do not attempt to inflate during unusually strong wind. If it becomes too windy for safe operation, simply allow
your inflatable to deflate, secure it, and wait for better condition.
Caution: Electricity and water are a bad combination. Protect the electric fan and power cord from exposure to water.
If the external flexible cable or cord is damaged, please do not to use it.The repair of the damaged main connection cable
is only allowed for a qualified technician.
Caution: This unit is not intended for use by children.
Warning
1.Do not connect the chain to the supply while it is in the packaging. Use only with the transformer supplied.
2.To reduce the risk of fire or shock hazard, do not expose this product to rain, moisture or dust. In addition, do not touch
the inflatable if your hand in wet.
3.Place the decoration item only on the ground which is free from snow, dirt, wetness, leaves etc.
4.For making sure a safe position, it is necessary to use all included fixing coils.
Components
ASSEMBLY INTRODUCTION
1.Place inflatable in a clean, open area, free from obstruction or other
debris.Make sure the air intake located on the bottom of unit is clear of
fabric and free of obstruction.
2.Make sure the zipper is fully closed on the back of unit.
3.Plug the adaptor into a power unit. Inflatable will start to inflate
4.For outdoor use, using the clip on the end of tether, attach one end to
a ring grommet on the side of the inflatable.
Secure the plastic stakes into ground and attach
the nylon tethers.
5.Adjust the sealed weight-bag to position your
inflatable.
6.To deflate, simply unplug from the outlet device
and open zipper on back of inflatable for faster
deflation.
Trouble shooting checklist!
If the unit is not inflating, the operation may be…
-The power source is interrupted or the cord may be unplugged.
-Debris may be lodged in the motor. Unplug the power source and remove any foreign objects or debris from the motor
-Ensure zipper is securely closed so air stays inside figure.
Cleaning, Storage and maintenance instruction:
-Only use mild detergent with cold water to wipe clean the figure. Leave inflated until completely dry.
-Unplug, roll up and store in original package or similar size box.
-Do not wipe clean the motor.
EN
-2-