HOMCOM A90-201V70 User manual

ASSEMBLY INSTRUCTION
INadd022V02_UK
READ AND SAVE THIS INSTRUCTION FOR FUTURE USE
A 9 0 - 2 0 1 V 7 0

Contents
Product Instruction
Safety Cautions and Warnings
Parameter and Packing List
Assembly Guidance
Exercise Advises and Plan
Instruction Manual
Maintenance
Common Malfunction and Solution

Product Instruction
Acrylic Cover
Handle
Phone Holder
Emergency Stop Device
Support Tube
Upper Motor Cover
Edging
Tail Cover
Back Foot Pad
Running Belt
Base
Front Foot Pad
Decorating Cover
Handle
Control
Panel
Acrylic Cover
Motor Cover

Safety cautions and warnings
Caution! Please read this manual carefully before using the product and please do follow
below issues:
This treadmill should be used indoor, do not let this product be soaked and keep it away
water, do not put other things on the treadmill.
Please take the proper sports gear and do warming up before use the treadmill, do not use
the treadmill on bare feet.
Power plug must be grounded and use dedicated circuit, do not share circuit with other
electric equipment.
Kids should stay away from the treadmill to avoid unexpected situation.
Do not use the tread mill overload and over time, or the motor, control panel,
bearing ,running belt and board’s life will be greatly shorten. Should do the regular maintenance
to keep tread mill in good state.
Reduce dust and keep certain humidity indoor to prevent electronic and control devices
from interference by static electricity.
Please turn off the treadmill after using.
Please make sure air circulation when you are using the treadmill
Clamp the emergency switch to your cloth to make sure the treadmill can be stopped if meet
unexpected situation.
Please stop doing exercise if you feel uncomfortable and consult your doctor
Please keep the silicone oil away from kid after using to avoid eating accident.
Warning: To avoid accident and injury, please do follow bellowing issues:
Please check your sport gear and make sure the zipper is lock
Do not wear cloth which is easy to be hooked by treadmill
Do not put the power cord near heat source
Do not let kid play with or play near tread mill
Do not use the treadmill outdoor
Must unplugged the treadmill before moving it
Never try to disassemble the product if you are not professional maintainer, or it will cause very
bad consequence
The treadmill can only be used in 20A circuit
Only one person use it at one time, do not use it with two people and more.
Please stop doing exercise if you feel dizzy, Chest pain, nausea, or shortness of breath, and consult
your fitness coach or doctor.

Warning!
Please consult your doctor if you are under therapy or have any one of following issues:
If you are suffering waist pain or hurt leg, waist or neck before, or have perceived obstacle to leg,
waist , neck and hand( also include disc herniation, Spondylolisthesis, Cervical protrusion)
Deformed arthritis, rheumatism, gout
Osteoporosis or bone abnormality
Circulatory system disorder(heart disease, vascular disease, high blood pressure)
Respiratory organs disorder
Implant cardiac pacemaker or other electronic equipment
Malignant tumor
Thrombosis, serious arterial lipoma, acute venous lipoma and other blood circulation disease or
skin infections
Perceived obstacle caused by diabetes
Wounded on skin
Sick or fever(38°C or higher temperature)
Spine abnormality or bending
Pregnant women or women are in the menstrual period
Unhealthy and need rest
Obvious bad condition
For physical recovery purpose
Other bad feeling besides above situations
All issues above may cause unexpected condition and may harm body.
Please stop doing exercise if you feel waist pain, dizzy, Palpitations or other abnormal feeling,
consult your fitness coach or doctor.
Do not let kid to use this product. Kid should be kept away from the product, or it may cause
unexpected risk.
Please make sure no other people or pet around the product when taking, packing or sliding it.
Forbidden
Never use if you found the shell is broken and off (inside parts are exposed) or welding point is
broken. Or it may cause unexpected condition.
Never jump on and off the product when you are using, it may cause falling and injured.
Never store the product out door, near bathroom or any place where is damp.
Never use or store the product under direct sunlight, near stove, electric blanket or other heating
supply equipment, or it may cause electric shock or fire accident.
Never use the product when you found power cord or plug is broken or socket slack, or it may
cause electric shock, short circuit or fire accident
Never break or twist the power cord, also never put things on the wire to avoid electric shock or

fire accident
Never use the product with two or more people at the same time, keep others way when using the
product, or it may cause unexpected situation or falling accident.
Never use the product if user can not express self conscious or can not operate the product by
himself/herself. Or it may cause unexpected situation.
Keep the product away water or other liquid, especially the main base. Or it may cause electric
shock or fire accident
Never do intense exercise if you don’t exercise usually. Do not use it after meal, fatigue, or other
uncomfortable state, or it may be harm to your health.
This product is only for home use, never use it at school, stadium or other public place, or it may
cause unexpected situations.
Never use the product if you are eating or doing other behavior, also never use it after drinking, or
it may cause accident or injured.
Never take your watch, bracelet, mobile phone and other valuable objects with you to avoid
damage, also take off your keys and knife to avoid hurting yourself.
Please do check the power cord whether there is needle, garbage or other wet things before
using to avoid electric shock, short circuit or fire accident.
Please turn the power switch to off position and unplug the product if do not use it for a period to
avoid electricity shock or fire accident caused by insulation deterioration
Grounding Information
This product must be grounding, it can greatly reduce the risk of electricity shock when the
product is dysfunction.
The plug of this product is grounding standard, please use local legal grounding power source to
connect the product
Danger
It may cause electricity shock if the product is not grounding properly. Please ask professional
electrician to check if you are not sure whether the grounding is correct. Never modify the plug if
it can not fit your power source, please ask professional electrician to install a proper power
source.
Never use transfer plug, this product must connect to power source with grounding function.

Parameter and packing list
Parameter
No. Parameter Description
1. Input voltage AC220/50Hz
2. Motor power 1.25HP
3. Speed 1-12 KM/h
4. Running belt area 430*1200mm
5. Maximum load 90KG
6.Expanded dimension W76*D148*H122cm
7. Net weight 32KG
8. Gross weight 36KG
9. Functions Distance，Speed，Time, Calorie
Packing List
No. Name Quantity
1 Base 1pc
2 Spare parts 1pc
Spare Parts List
No. Name quantity
1 Allen wrench 1
2 Emergency Stop Device 1
3 Manual 1
4 Silicone Oil 1

Assembly Guidance
Assembly instructions for Support tube:
Step 1
Take out the product from the PE bag and put it on flat floor.
Support tube
Step2 Then pull the support tube from the base, until the support tube get to the almost
vertical position to the base.
Step3 Use the 6# Allen wrench to lock the screws which is inside the both decoration covers
in clockwise direction.( If the handles can be shaken easily, please keep locking the screws)

Step4
Turn the handles as arrow’s direction,
Step 5
There is a yellow area in the control panel, please put the emergency stop device on the
middle of the this yellow area.
Security lock
Handle

S
t
e
p
6
P
l
e
a
s
e
p
u
s
h
t
h
e
p
h
o
n
e
h
o
l
d
e
r
t
o
t
h
e
l
e
f
t
，
w
h
e
n
t
h
e
p
h
o
n
e
h
o
l
d
e
r
i
s
f
r
e
e
f
r
o
m
t
h
e
locker please put the holder up.
Please turn the switch to “-”position
Step7 Then connect the power cord to the power source and the power interface on the
product, turn the switch to “-”position, then the product is power on, now you can enjoy
your exercise.

Exercise advises and plan
Warm up Do warm up exercise for 5~10 minutes before using this product
Breath Do not hold your breath when you are using this product, try to breath by nose and
coordinate with your movement. You should stop if breath too hasty
Exercise frequency Muscle should rest for 48 hours after exercising
Intensity It depends different individual, please increase intensity gradually, the fatigue can
be cure under this situation.
Diet To protect the digestive system, please do not use this product in 1 hour after meal,
also do not take any food in half hour after exercise. Try to not drink water when doing exercise to
reduce visceral burden.
Stretching exercises No matter what speed you will run, a first stretching exercise is necessary, it
can improve muscle activity and reduce the risk of sports injured. So you can follow the bellowing
guidance after warming up, 5 times for each pose, and do it again after exercise.
1.Stretch down bend down relax shoulder and back then try to touch
your feet, 3 times (picture 1)
2
.
S
t
r
e
t
c
h
l
e
g
s
s
i
t
o
n
a
m
a
t
,
s
t
r
e
t
c
h
o
n
e
l
e
g
a
n
d
k
e
e
p
t
h
e
o
t
h
e
r
t
o
s
t
a
y
b
a
l
a
n
c
e
t
h
e
n
t
r
y
t
o
t
o
u
c
h
y
o
u
r
t
o
e
s
o
f
t
h
e
s
t
r
a
i
g
h
t
l
e
g
,
s
t
a
y
t
h
e
p
o
s
e
f
o
r
1
0
~
1
5
s
e
c
o
n
d
s
t
h
e
n
r
e
p
e
a
t
t
o
t
h
e
o
t
h
e
r
l
e
g
,
3
t
i
m
e
s
(
p
i
c
t
u
r
e
2
)
3
.
S
t
a
n
d
a
n
d
p
u
t
y
o
u
r
h
a
n
d
s
o
n
t
h
e
w
a
l
l
o
r
t
a
b
l
e
,
t
h
e
n
p
u
s
h
y
o
u
r
b
o
d
y
d
o
w
n
a
n
d
s
t
a
y
1
0
~
1
5
s
ec
o
n
d
s
,
3
t
i
m
e
s
f
o
r
e
a
c
h
l
e
g
(
p
i
c
t
u
r
e
3
)
4
.
A
n
k
l
e
j
o
i
n
t
s
t
r
e
t
c
h
S
t
a
n
d
a
n
d
h
o
l
d
s
o
m
e
t
h
i
n
g
t
o
k
e
e
p
b
a
l
a
n
c
e
,
t
h
e
n
p
u
l
l
o
n
e
a
n
k
l
e
t
o
y
o
u
r
B
u
t
t
o
c
k
s
u
n
t
i
l
y
o
u
f
e
e
l
t
e
n
s
e
o
n
l
e
g
m
u
s
c
l
e
,
s
t
a
y
1
0
~
1
5
s
e
c
o
n
d
s
,
3
t
i
m
e
s
f
o
r
e
a
c
h
l
e
g
(
p
i
c
t
u
r
e
4
)
5
.
T
h
i
g
h
s
t
r
e
t
c
h
S
i
t
a
n
d
k
e
e
p
f
e
e
t
a
g
a
i
n
s
t
,
t
h
e
n
p
u
l
l
f
e
e
t
t
o
g
r
o
i
n
,
s
t
a
y
1
0
~
1
5
s
ec
o
n
d
s
a
n
d
d
o
i
t
f
o
r
3
t
i
m
e
s
(
p
i
c
t
u
r
e
5
)

Instruction manual
I.Brief introduction
It is an easy operating-panel, it does not require complicated operation
Vocabulary explanation:
Treadmill related: speed
Sports related: distance, calorie, time
Mode: manual mode and auto program
Manual mode: free adjusted mode without default data
Auto program: the mode with default data.
II.Led digital display
1、DISTANCE
2、SPEED
3、TIME
4、CALORIE
DISTANCE SPEED TIME CALORIE
III.Keys
Control panel instructions
1.Start/stop
2.Speed +
3.PROG
4.MODE
5.Speed -

IV.Parameter
1.Voltage 220V/50Hz
2.Minimum speed 1 KM/H
3.Maximum speed 12 KM/H
4. Auto mode maximum time is 99 minutes
5.Manual mode minimum time is 5 minutes, maximum time is 99 minutes
6.Manual mode minimum distance is 1 KM, the maximum distance is 99 KM.
7.Minimum calorie is 20 KCal, the maximum is 990 KCal under manual mode.
V. Safety warning
The display will show E07 if emergency stop device is removed in any case.
VI.Mode
Auto Mode
Please check whether the power supply is plugged, the safety lock is set in right place and
whether the power switch is turned on.
In the standby state, the window displays 0:00, press the START button to start the 3 seconds
countdown, and the window displays 1 KM. The time window shows the 000 minutes in default
state. The window will display the corresponding digital speed, calories and distance. The product
will stop automatically after 99 minutes. You can adjust speed by pressing the speed + - key, the
minimum speed is 1 KM/H, the maximum speed is 12 KM/H
1.Manual mode :Press to choose auto program P1-P12, under auto mode the default time is 30 minutes,
you can adjust the time by pressing , the minimum time is 5 minutes, the maximum time is 99 minutes.
Then you can press , the product will start working after a three seconds’ count down. The product will
sound “ di di di” if it switch program.
2.Press key once, the control panel will display H-1, the default time is 30 minutes, you can adjust the time by
pressing , the minimum time is 5 minutes, the maximum time is 99 minutes. Then you can press , the
product will start working after a three seconds’ count down.
3.Press key twice, the control panel will display H-2, the default distance is 1 KM, you can adjust the time by
pressing , the minimum distance is 1 KM, the maximum distance is 99 KM. Then you can press , the
product will start working after a three seconds’ count down.
4.Press key three times, the control panel will display H-3, the default calorie is 50 KCal, you can adjust the
calorie by pressing , the minimum calorie is 20 KCal, the maximum calorie is 990 KCal. Then you can
press , the product will start working after a three seconds’ count down.

Maintenance
Lubricating
The running belt must be lubricated with the specialized silicone oil after using for a period.
1.Suggest lubricating frequency : Using time is less than 3 hours a week Lubricate it every 5
month
Using time is 4-7 hours a week Lubricate it every 2 month
Using time is over 7 hours a week Lubricate it every month
It will not be better if it is over lubricating, but reasonable lubricating can be a important factor to
increase the life of treadmill
2. How to do the lubricating To check whether your treadmill needs lubricating, you can hold the
running belt and put the other hand to touch the bottom center of the running belt, if you can feel
the wet silicone oil that means it does not need lubricating. If you feel the running belt is very dry
that means your treadmill need a lubricating.
A How to lubricating (as shown in the picture)
B Stop and fold the treadmill
C Raise the running belt on the base, then try to put the silicone oil pot under the running belt
and smear the silicone oil on the belt and both side of the treadmill, then set 1KM/H to make sure
silicone oil lubricates every well, you can step the running belt from left to right to improve the
lubricating effect.
running
board
running
board
running belt
silicone
oil

3.Adjusting the elastic tendency of running belt
Every treadmill must set the elastic tendency before it leaves factory and after assembly, but
it will become loose after using a period.
Just like it will stuck or slide sometimes, you can turn the adjusting bolt in clockwise direction,
semi-circle a time (left and right at the same time) to adjust the running belt. Don’t make it
too loose or too tight, or the running belt will slide or make motor over load.
4.Running belt deviating.
All running belt is in the right place when it is packaged. But there are some factors will cause
this situation
a.The treadmill is not set flat
b.User does not step on the center of the running belt
C.Caused by 1 or 2 is easy to be solved, just set the treadmill flat and let it idle for several
minutes can solved the problem.
If the deviating still exist, you can use the 6mm Allen wrench adjust it in a quarter turn.
Deviating is not in the warranty scale, user can maintain it as follow instructions. But please fix it
as soon as you find the problem or it may break the running belt.
1.Running belt slipping: The running belt may slip or have unexpected stop in working time
2.Adjust the blet: Adjust the screws around the belt in clockwise direction for 3 rounds, then
adjust the belt as the belt deviation until the belt return to the middle of the base.
If deviating turns to right, then turn the left
screw in counterclockwise direction,
Turn the right screw in clockwise direction
If deviating turns to left, then turn the left
screw in clockwise direction,
turn the right screw in counterclockwise
Turn the left screw in clockwise direction with
Allen wrench
Turn the left screw in counterclockwise
direction with Allen wrench

Common malfunctions and solutions
Malfunctions
Cause
Solution
Treadmill does
not work
Unplug
Connect the power cord
Emergency Stop device
is not in the right place
Put the emergency stop device on the right
place in control panel
Single wire or power
supply broken
Check signal wire
Switch off
Switch on
Running belt dose
not move
smoothly
Not enough lubricating
Lubricate with silicone oil
Running belt is too tight
Adjust the intensity of the running belt
E01
Control panel does not
work
Check whether the communicating wire is
broken or unplug
E02
Motor line disconnected
Check whether the motor line is disconnected
or not connect well.
E05
Over voltage protection
Turn off the product and turn on again the
product will be ok.
E07
Emergency stop device
falls off
Put the emergency stop device on the yellow
place of control panel.
Other malfunctions and solutions
1. Control panel does not work
a.Check whether the power cord is connected correctly, whether the switch is on, or whether the fuse
on the control panel is blew.
b.Check whether the control panel is well connected to the display.
c.Check whether the control panel is well connected to the transformer.
2.The HR function does not display well
a.Check whether the connecting line of HR is firmed.
b.Check whether your hands touch the inducting point
c.Please wash your hands and keep your hands wet.
3.Motor does not work
a.Please check whether all wires are well connected.
b.Please check the error code on display.
4.Touching screen does not work well
a.Please check whether the screen is wet
b.If there is too much sweat in your hands.