HOMCOM B1-0095 User manual

IN221000789V01_UK
B1-0095
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
ASSEMBLY INSTRUCTION

Country Phone Email
0044-800-240-4004 [e-mail]
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please
read all the instructions in this user's manual. If you have any questions, please contact
our customer care center.
Our contact details are below:
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA
2

3

110kg.
4

4pc; wrench 1pc; knob 1pc
5

6

7

8

9

10

11

1
12

Common malfunctions and solutions
Malfunctions Cause Solution
Treadmill
does
not work
Unplug Connect the power cord
Safety lock is
not in the right
place
Put the emergency stop device
on the right
place in control panel
Single wire or
power
supply broken
Check signal wire
Switch off Switch on
Running belt dose
not
move
smoothly
Not enough
lubricating Lubricate with silicone oil
Running belt is
too tight
Adjust the intensity of the
running belt
E01
Control panel
does not
work
Check whether the
communicating wire is broken or
unplug
E02
Over voltage
protection Turn off the product and turn on
again the product will be ok.
E03 Over current
protection
Turn off the product and turn on
again the product will be ok.
E05 Over loading
protection Overloaded
E06 Communication
error
1. The main cable interface is
loose;
2. The electronic watch is
broken;
3. The controller is damaged;
E07 Safety lock
disconnected
1. The safety switch is not
installed;
2. The induction wire of the
safety switch is broken;
3. The safety switch interface of
the electronic meter is
damaged;
13

14