Home Accents Holiday 21RT0702124 User manual

THD SKU# 1006 128 629
Model # 21RT0702124
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 4ft Halloween Classics Animated LED Spider.
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
4ft Halloween Classics Animated LED Spider
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground or flat
surface. Many parts are connected by the lighting string that runs throughout the
item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against
the parts list. It is recommended to assemble parts of the product while laying flat
on the ground versus standing the item up to assemble the parts. If any parts are
missing or damaged do not attempt assembly but contact our customer service
center or return the item to place of purchase with receipt.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts (0.08
Amps). Do not overload. Do not connect to another lighting string, decorative outfit
or other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the product taking caution not to cut any electrical wires.
c. Wipe the product with a damp cloth and allow to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the product correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the product does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the product has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per year.
This product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, in-store displays,
misuse or accidents. Questions, problems, missing parts? Before returning to the store,
call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
Diagram of Parts
Parts List
A Back Leg-1 1
B Leg-2 1
C Leg-3 1
D Front Leg-4 1
E Front Leg-5 1
F Leg-6 1
G Leg-7 1
H Back Leg-8 1
I Body 1
J Eye 2
K Base Stand 1
L Stabilizing Bar 1
Hardware List
M Spare Bulb 2
N Spare Fuse 2
O Plastic Tie 15
P Ground Stake 4
D
P
M
A
C
G
B
E
K
F
H
I
J
L
N
O

A
SSEMBLY
1 Assembling the Body to the Base Stand
Insert the connecting rod on Base Stand (K) into the bottom of the
Stabilizing Bar (L) and lock together with the connecting pin. Insert
the tapered end of the connecting rod at the top of the Stabilizing
Bar (L) into the connecting hole at the bottom of the top of the Head
and Body (I) and lock together with the connecting pin.
2 Assembling the Legs to the Body
Insert the connecting rods at the end of each Leg (A,B,C,D,E,F,G,H) into
the matching connecting holes on the Body (I) then fasten together at the
connecting loops with the Plastic Ties (O). Connect the power cords on the
leg to the body.
3 Assembling the Eyes to the Body
Insert the connecting rods at the bottom of each Eye (J) into the
matching connecting holes at the top of the Body (I) then fasten
together at the connecting loops with the Plastic Ties (O).
4 Assembling the Ground Stakes
Insert Ground Stakes (P) over the metal frame at each corner of the
base stand then into the ground firmly.
I
K
L
B
D
A
C
H
F
G
E
O
I
J
I
O
P