Home Accents Holiday 21RT32621141 User manual

SKU # 1006 262 807
Model # 21RT32621141
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 3-Piece LED Deer Family. We strive to continually
create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you
for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
3-Piece LED Deer Family
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground versus standing the item
up to assemble the parts. If any parts are missing or damaged do not attempt assembly
but contact our customer service center. 1-877-527-0313
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 21.6 Watts (0.18
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor, ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs, connections and burned
out fuses in the plug
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
Diagram of Parts
Parts List
Locater Name Qty.
A Antler of Deer 2
B Ear of Deer 2
C Head/Neck of Deer 1
D Body of Deer 1
E Front Leg of Deer 2
F Hind Leg of Deer 2
G Tail of Deer 1
H Head/Neck of Doe 1
I Ear of Doe 2
J Body of Doe 1
K Front Leg of Doe 2
L Hind Leg of Doe 2
M Tail of Doe 1
N Head/Neck of Baby Deer 1
O Ear of Baby Deer 2
P Body of Baby Deer 1
Q Front Leg of Baby Deer 2
R Hind Leg of Baby Deer 2
S Tail of Baby Deer 1
T Bow Tie 3
Hardware List
Locater Name Qty.
U Spare Bulb 9
V Spare Fuse 6
W Plastic Tie 40
X Ground Stake 12
A
U
E
B
WC
V
G
D
F
H
I
J
K
L
M
N
O
Q
P
X
T
R
S

A
SSEMBLY
1 Assembling the Legs to Body of Doe
Insert the connecting rods on the Front and Hind Leg of Doe (K,L) into
the connecting holes on the underside of the Body of Doe (J) and fasten
at the connecting loops or over the metal frames with Plastic Ties (W).
The Legs come with metal bars attached to stabilize the Doe. Insert the
hooked end of the metal bars into the metal hole on the opposite Leg.
2 Assembling Head/Neck, Tail and Ears to Doe
Insert the connecting rods on the Head/Neck of Doe (H) into the
connecting holes on the Body of Doe (J) and fasten at the connecting
loops with Plastic Ties (W). Insert the connecting rods on both Ears of Doe
(I) into the connecting holes on the Head/Neck of Doe (H). Insert the
connecting rod on the Tail of Doe (M) into the connecting hole at the rear
of Body of Doe (J).
3 Assembling the Legs to Body of Baby Deer
Insert the connecting rods on the Front and Hind Legs of Baby Deer
(Q,R) into the connecting holes on the underside of the Body of Baby
Deer (P) and fasten at the connecting loops or over the metal frames
with Plastic Ties (W).
4 Assembling the Head/Neck, Tail and Ears to Baby Deer
Insert the connecting rods on the Head/Neck of Baby Deer (N) into the
connecting holes on the Body of Baby Deer (P) and fasten at the connecting
loops with Plastic Ties (W). Insert the connecting rods on both Ears of Baby
Deer (O) into the connecting holes on the Head/Neck of Baby Deer (N).
Insert the connecting rod on the Tail of Baby Deer (S) into the connecting
hole at the rear of the Body of Baby Deer (P).
5 Assembling the Legs to Body of Deer
Insert the connecting rods on the Front and Hind Legs of Deer (E,F) into
the connecting holes on the underside of Body of Deer (D) and fasten at
the connecting loops or over the metal frames with Plastic Ties (W). The
Legs come with metal bars attached to stabilize the Deer. Insert the
hooked end of the metal bars into the metal holes on the opposite Leg.
6 Assembling the Head/Neck to Body of Deer
Insert the connecting rods on the Head/Neck of Deer (C) into the
connecting holes on the Body of Deer (D) and fasten at the connecting
loops with Plastic Ties (W).
7 Assembling the Antlers and Ears to Head/Neck & Tail to
Body of Doe
Insert the connecting rods on bothAntlers and Ears (A,B) into the
matching connecting holes at the top of Head/Neck of Deer (C). [Note:
The ears go to the outside of the Antlers]. Insert the connecting rod on
the Tail (G) into the connecting hole at the rear of Body (D).
8 Assembling the Bow Ties and the Ground Stakes
Insert the wires on the backside of the Bow Ties (T) through the material on
the bodies then twist the wires together to secure. Place the Ground Stakes
(X) over the metal frame at each hoof of the Deer, Doe and Baby Deer then
into the ground.
W
K
L
J
J W
H
I
M
R
W
Q
PS
P
N
O
W
F
D
E
W
D
C W
D
B G
A
C
X
T