Home Accents Holiday TY336-1911-2 User manual

SKU # 1004 384 993
Model # TY336-1911-2
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 25in LED Lighted Shark. We strive to
continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
25in LED Lighted Shark
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center.
1-855-HDHoliday (1-855-434-6543)
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday 1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Hat 1
B Halves of Head &
Front Body 2
C Halves of Rear
Body 2
D Tail and Light
String 1
E Dorsal Fin 1
F Ventral Fin 2
Hardware List
Locater Name Qty.
G Spare Bulb 2
H Spare Fuse 2
I Plastic Tie 15
J Ground Stake 4
A
H
D
BE
G
C I
J
C
F
F
B

A
SSEMBLY
1 Assembling the Head & Front Body
Align the two Halves of Head & Front Body (B) with each other then insert
the connecting rods on one half into the connecting holes on the other half
and fasten together at the connecting loops with Plastic Tie(I).(Note: Fasten
the adjacent parts if needed with plastic ties (as shown in the FIG ).
2 Assembling the Rear Body
Align the two Halves of Rear Body (C) with each other then insert the
connecting rods on one half into the connecting holes on the other half
and fasten together at the connecting loops with Plastic Ties (I).(Note:
Fasten the adjacent parts if needed with plastic ties (as shown in the FIG ).
3 Attach the Head & Front Body to Rear Body
Insert the connecting rods on the front edge Rear Body (C) into the
connecting holes on the back edge of the Head & Front Body (B) and
fasten together at the connecting loops with Plastic Ties (I).
4 Securing the Tail to the Body
Insert the connecting rod on Tail (D) into the connecting holes on the end of
the Rear Body (C) and fasten together at the connecting loops with Plastic
Ties (I).
5 Assembling the Ventral Fins to the Body
Insert the connecting rods on each Ventral Fin (F) into the connecting holes
on the sides of the Front Body (B) and fasten together over the metal frames
with Plastic Ties (I).
6 Assembling the Dorsal Fin to the Body
Insert the connecting rods on the bottom of the Dorsal Fin (E) into the matching
connecting holes on the top of Front Body (B) and fasten together over the
metal frames with Plastic Ties (I).
7 Assembling the Hat to the top of the Head
Insert the connecting rod on the front bottom edge of the Hat (A) into the
matching connecting hole at the top of Head (B).
8 Assembling the Light String and Ground Stakes
Wrap the Light String around the Body of the Shark for your desired look and
secure with Plastic Ties (I) over the metal frame. Insert the clip on the Ground
Stakes (J) over the metal base connecting loops then into the ground firmly.
B
B
I
C
I
C
C I
B
C
D
I
F B
I
F
B
I
E
A
B
J
I