Safety Information
WARNING:This is not a toy and is not intended for use by
children.
(A)Do not mix old and new batteries.
(B)Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
(C)Do not dispose of the battery in fire as the battery may leak and
explode.
(D)Use type “AA” batteries.
(E) Always purchase the correct size and grade of battery most suitable
for the intended use.
(F) Replace all batteries of a set at the same time.
(G) Clean the battery contacts and also those of the device prior to
battery installation
(H) Ensure the batteries are installed correctly with regard to polarity (+
and -)
(I) Remove used batteries promptly.
(J) Remove batteries from battery box of lights which is not to be used
for an extended period of time.
Safe for Outdoor use.
Warning: Please note that changes or modifications not
expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
withthelimitsforaClassBdigitaldevice,pursuant toPart15oftheFCC
Rules. These limits are designed to provide reasonable protection
againstharmfulinterference inaresidential installation. Thisequipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particularinstallation. Ifthisequipmentdoescauseharmfulinterference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
1. Risk of fire. This product does not contain lamp shunts, which allow
theproduct tooperate ifone lampburns out.Replacebulbs onlywith
the spare bulbs provided with this product.
2. To reduce the riskof fire and electric shock: a)Do not install on trees
having needles, leaves or branch coverings of metal or materials
which look like metal, and b) Do not mount or support strings in a
manner that can cut or damage wire insulation.
50L B/O MINI LED LIGHTS WARM WHITE
SKU# 1005022785
Instruction of Battery box
Step1:Carefullytakethe productoutofthebox.You willfindthebattery
box.
Step 2: Carefully open the cover of the battery box. (See Fig. 1)
Step3: Place threenew “AA”batteries (not
included) into the holders according to the
“+” and “-” directions as shown in Fig. 1.
Fig. 1
Step 4: Press the button on the battery box to choose light functions.
There are three choices: 1, 2, 3 for the button as shown in Fig. 2.
1. Lights on.
2. Timer Function. The lights will automatically
beon for6 hoursandthenofffor18 hours.This
cycle will occur every day unless setting is
changed to “on” or “off” position. When press
“Timer” feature, lights will flash once to remind
you that timer feature is activated.
3. Lights Off.
Fig. 2
Step 5: Press the button to “OFF” position when not in use to conserve
battery life.
User Servicing Instructions
Replace the lamp.
a) Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
b) Unlock the burned out LED bulb by lifting the hook and pulling both
thebulb andplastic base straightoutof thebulb holder.Do nottwist
bulbs.
c) Replaceburnedoutbulbwith3.0volt0.06wattLEDtypebulbONLY.
(Replacement bulbs included)
d) Lock the LED bulb.
If the new lamp base does not fit in lampholder, follow the steps below
before step c.
1. Pull the reflector out.
