Home Decorators Collection 1001803998 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace console.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Home Decorators Collection!
SKU # 1001803998
Model # WSFP59HD-14
ASSEMBLY INSTRUCTIONS
Bellevue Park 59 in. Media Console with Infrared Electric Fireplace
in Dark Brown Cherry Finish
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

2
Table of Contents
Table of Contents................................................................... 2
Safety Information................................................................. 2
Warranty................................................................................ 2
Pre-Assembly ........................................................................ 2
Planning Assembly........................................................... 2
Tools required .................................................................. 2
Hardware Included ...........................................................3
Package Contents.............................................................4
Assembly ...............................................................................5
Care and Maintenance.........................................................16
Safety Information
Please read and understand these instructions before
assembling and using this console. Save these instructions
for future reference.
MAXIMUM RECOMMENDED WEIGHT LOADS
WARNING: This unit is not intended for use with CRT TVs.
Use only with flat panel TVs and audio/video equipment
meeting recommended size and weight limits. Never use
with larger/heavier than recommended flat panel TVs or
equipment. To avoid instability, place flat panel TV in the
center of the unit; the base of the television must be able
to rest on the supporting surface of the unit without
over-hanging the edges. Improperly positioned flat panel
TVs, or flat panel TVs or other equipment that exceed
recommended size and weight limits could fall off or break
the unit, causing possible serious injury.
Warranty
We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or materials, or
fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.
This warranty gives you specific rights and you may also have other rights which vary from state to state.
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not
assemble this product and contact the Customer Service Team at 1-800-986-3460.
TOOLS REQUIRED
Phillips
screwdriver
(not provided)
Maximum load 22.6 kg / 50 lb
Place TV behind
t
he sto
pp
er
Fit
s
up
t
o most 177.
8
cm / 70 in.
f
lat panel TV
s
Maximum load 61.2 kg / 135 lb
Maximum load 6.8 kg / 15 lb

3 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity Part Description Quantity
AA Wood dowel 44 + 2 extra KK Medium wood screw 4 + 1 extra
BB Cam lock 43 + 2 extra L
L
Cam lock cover 8 + 1 extra
CC Cam bolt 43 + 2 extra MM Shelf pin 8 + 1 extra
DD Pan head screw 4+ 1 extra NN Knob 4
EE Magnetic catch 2 OO Knob bolt 4
FF
L
-shaped metal brace 2 PP Straight metal plate 2
GG Corner connector 4 QQ Acrylic stopper 1
HH Short wood screw 12 + 1 extra RR Glue 1
II Washer head screw 42 + 2 extra SS Touch-up pen
(not included for WSFP59ECHD-16) 1
JJ Long wood screw 4 + 1 extra TT Tipping restraint hardware
k
it 2
L
L
AA BB CC DD EE FF GG HH II
JJ K
K
MM NN OO PP QQ
TT SS
RR

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity Part Description Quantity
A Top panel 1 N Right upper side panel 1
B Center shel
f
1 O Left upper partition panel 1
C Bottom panel 1 P Right upper partition panel 1
D Bottom back stretcher 1 Q Adjustable shel
f
2
E Bottom
f
ront molding 1 R Upper back panel 1
F Left lower side panel 1 S Middle crossbar 1
G Right lower side panel 1 T Middle stile 2
H Left lower partition panel 1 U Drawer 2
I Right lower partition panel 1 V Right lower back panel 1
J Left door 1 Fireplace insert 1
K Right door 1 Remote control with battery 1
L
Left lower back panel 1
M Left upper side panel 1
A
B
C
D
E
FGHIJKL
MOPN Q
STU
R
V

5 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly
1 Screwing the cam bolts
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
This will make the assembly easier.
□ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor
or the empty carton to avoid any scratches.
□ Securely screw the cam bolts (CC) into the designated plastic bushings on the top panel (A) and the bottom panel (C)
using a Phillips screwdriver.
2 Screwing the cam bolts
□ Securely screw the cam bolts (CC) into the designated plastic bushings on the lower side panels (F and G) and the
lower partition panels (H and I) using a Phillips screwdriver.
CC
C
A
H
I
G
F
CC

6
Assembly (continued)
3
Assembling the cam bolts and magnetic catches
□ Securely screw the cam bolts (CC) into the designated plastic bushings on the center shelf (B) on both sides.
□ Align two magnetic catches (EE) to the pilot holes on the center shelf (B) with the magnetic plates facing the finished
edge. Then attach the magnetic catches (EE) in place using two pan head screws (DD) per catch.
4
Attaching the middle stiles
NOTE: Refer to the dowel and cam lock assembling guide drawings in this step for further clarification on how to properly glue in
the wooden dowels and install cam locks. Apply this method whenever instructed to install wood dowels and cam locks .
□ Fasten one middle stile (T) to the left lower partition panel (H) using two wood dowels (AA) and two cam locks (BB).
□ Repeat the same procedure to combine the other middle stile (T) and right lower partition panel (I) together.
B
B
EE
DD
CC
H
I
TT
GLUE
XX
FINAL
12 43

7 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
5
Installing the bottom back stretcher
□ Align and attach the bottom back stretcher (D) to the bottom panel (C) with
f
our wood dowels (AA) and four cam locks
(BB).
6
Attaching the middle crossbar
□ A
t
tach
t
he middle crossbar (S) between the lower partition panels (H and I) by engaging
t
wo cam locks (BB), as
shown.
H
I
S
C
D

8
Assembly (continued)
7
Attaching the bottom panel assembly
□ Glue
f
our wood dowels (AA) into the inner holes of the lower partition panels (H and I) and attach them to the
bottom panel (C) with four long wood screws (JJ).
8
Installing the lower side panels
□ Glue six wood dowels (AA) into the inner holes of the bottom panel (C) and bottom back stretcher (D) at both ends.
□ Align the large holes on both side panels (F and G) with the inserted wood dowels (AA) and press them together. Attach
the side panels (F and G) in place by engaging six cam locks (AA), as shown.
JJ
H
I
AA
C
JJ
AA
BB
BB
C
G
F
AA
AA
D

9 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
9
Installing the center shelf
□ Glue ten wood dowels (AA) into the top inner holes of the previous assembly.
□ Ask for assistance to position the center shelf (B) onto the inserted wood dowels (AA). Attach the center
shelf (B) in place by engaging eleven cam locks (BB).
10
Attaching the upper side panels and partition panels
□ Glue eight dowels (AA) into the inner holes of the upper side panels (M and N) and partition panels (O and P) and
attach them to the center shelf (B) by engaging eight cam locks (AA).
B
M
N
O
P
F
G
H
I
S
B
AA

10
Assembly (continued)
11
Attaching the top panel
□ Glue eight wood dowels (AA) into
t
he
t
op inner holes on
t
he upper side panels (M and N) and partition panels (O and
P). Position the top panel (A) onto the inserted wood dowels (AA) and fasten it in place with eight cam locks (BB).
12
Attaching the bottom front molding
□ Align and attach the bottom front molding (E) to the lower side panels (F and G) with
f
our medium wood screws (KK).
□ With the pilot holes as a guide, fasten four corner connectors (GG) at the bottom joints between the bottom panel
(C) and the bottom front molding (E) using two washer head screws (II) per corner connector. Tighten all screws
with a Phillips screwdriver.
F
G
II
KK
II
GG
C
E
M
N
O
P
A