Home Decorators Collection HAWTHORNE 2049000120R User manual

HAWTHORNE WIDE 6-DRAWER DRESSER 32"Hx59"W
SKU# 2049000120R (DARK CHERRY)
SKU# 2049000550R (OAK)
SKU# 2049000410R (WHITE)
SKU# 2049000210 (BLACK)
BEFORE BEGINNING ASSEMBLY, CHECK TO MAKE SURE ALL
PARTS AND HARDWARE ARE ACCOUNTED FOR.
IT IS SUGGESTED THAT YOU SAVE THE CARTON AND PACKING
MATERIAL UNTIL AFTER ASSEMBLY IS COMPLETED SELECT A CLEAN,
SMOOTH SURFACE TO WORK (SUCH AS CARPET).
THEN, FOLLOW THE EASY STEPS BELOW.
MADE IN BRAZIL
16 02 08 2
30 Min.
IF PARTS ARE MISSING, PLEASE CALL 1-800-998-7021 FOR INFORMATION.

Top
Left Side
Right Side
Rail
Drawer Front
Left Drawer Side
Right Drawer Side
Drawer Bottom
Drawer Back
Description
1
2
3
11
15
31
32
16
17
Part#
1
1
1
6
6
6
6
6
6
Qty Sizes (w x d x h)
19¨
17 13/16¨
17 13/16¨
1 9/16¨
7 3/8¨
6 15/16¨
15 1/2¨
X
X
X
X
X
X
X
X
X
59 1/16¨
31 1/16¨
31 1/16¨
26 3/4¨
26 5/8¨
15 9/16¨
25 11/16¨
25 1/4¨
11/16¨
1 5/8¨
1 5/8¨
11/16¨
9/16¨
9/16¨
9/16¨
1/8¨
9/16¨
X
X
X
X
X
X
X
X
X
15 9/16¨
Back Panel
13 318 3/16¨
X
25 15/16¨ 1/8¨
X
Panel Connector
14 213/16¨
X
25 13/16¨ 1/4¨
X
Divider
4117 5/8¨
X
24 15/16¨ 1 9/16¨
X
Bottom Panel
5117 9/16¨
X
54 1/4¨ 11/16¨
X
Front Rail
62 1/2¨
X
54 3/16¨ 11/16¨
X
1
Central Foot
10 1 3/16¨
X
4 5/8¨ 1 3/16¨
X
1
6 15/16¨
6 15/16¨
3
4
5
2
x6
1
10
6
11
11
15
32
31
16
17
13
13
13
14
14

F
E
D
C
B
A
1/16¨ x 7/8¨
12
1/8¨ x 1 3/16¨
26
48
1/4¨ x 1 3/16¨
30
30
48
HARDWARE PACK
G
H
I
12
12
12
1/8¨ x 1 3/16¨
1/8¨ x 5/8¨
J1
K1
L2
M1
N1
3/16¨ x 1 9/16¨
1/4¨ x 1 15/16¨

S T E P 1
A
X48
B
X30
1. Prepare for future assembly by:
* Insert wood dowels (A) into all drawer sides (31) & (32)
* Insert wood dowels (A) into the side parts (2) & (3)
* Insert wood dowels (A) into the divider (4)
* Insert wood dowels (A) into all rails (11)
* Insert wood dowels (A) into the bottom panel (5)
* screw mini-fix pins (B) into the top panel (1)
* screw mini-fix pins (B) into the divider (4)
* screw mini-fix pins (B) into the side parts (2) & (3)
* screw mini-fix pins (B) into the bottom panel (5)
A
A
X6
11
B
B
B
B
B
B
B
B
B
AA
32
X6
AA
31
X6
05
A
A
A
A
B
B
B
04
B
B
B
A
A
A
A
B
B
B
01
B
B
B
A
A
A
A
B
B
B
B
B
B
B
B
B
2
3

S T E P 2
S T E P 3
2. Attach the plastic plug (J) to central foot (10) then screw the
adjustable foot (K) into the plastic plug.
J
X1
K
X1
10
J
K
3.
panel (5) and secure using screw (M) and allen key (N) as shown.
Using the holes as guide, attach the central foot (10) to bottom
M
N
X1 X1
N
M
M+N
10
5

C
X6
S T E P 4
S T E P 5
4.
1 as guide, assemble the rails (11) to divider(4) as shown.
Secure the rails to the divider using mini-fix drums (C) in a clockwise
motion as shown:
Using the dowels and mini-fix pins previously attached in step
5.
1 as guide, assemble the bottom panel (5)to side(2) and divider (4)as
shown. Next align and attach the side (3) making sure all dowels and
holes are matched up.
Secure the rails and panel to the sides using mini-fix drums (C) and
screws (L) in a clockwise motion as shown:
Using the dowels and mini-fix pins previously attached in step
C
C
C
C
C
C
4
11
11
11
11
11
11
C
C
C
C
C
C
C
C
C
C
C
C
CL
L
C
C
X12
L
X2
2
4
3
5
11
11
11
11
11
11

S T E P 6
S T E P 7
6.
pins as guides, secure using mini-fix drums (C) as shown.
Attach the front rail (6) to the bottom rail (5) using the mini-fix
7.
as shown.
Attach the top panel (1) and secure using mini-fix drums (C)
C
C
C
C
CC
C
CC
C
CCC
C
X3
6
C
X9
6
5
2
4
1
3

S T E P 8
S T E P 9
8. Using dowels as your guide, align and attach a left (31) and a
right (32) drawer side to a drawer front (15) as shown. Secure using
screws (D) as show.
9. Slide in the drawer bottom (16) as shown.
D
X24
D
D
D
x6
32 15
x6
16
31

S T E P 10
S T E P 11
10. Align and attach the drawer back (17) as shown, secure using
screws (D).
11. Attach the drawer knobs (F) to the drawer front (15) using screws
(G) as shown. Then, attach the plastic drawer stop (H) to the drawer
back using screw (I) as shown.
x6
F
X12
G
X12
H
X12
I
X12
17
15
17
H
I
G
x6
17
D
D
D
D
D
X24
G
F
F
I
H
I
H

S T E P 12
12. Slide in the drawers. To remove the drawer you must press
down the drawer stop as shown.
E
X26
13. Complete the assembly of your chest by nailing the back panel
(13) using nails (E).
S T E P 13
15
15
15
15
15
15
13
13
13
14
14
E
E
E
E
EE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E

S T E P 1
S T E P 2
• When properly installed, this hardware can provide
protection against the unexpected tipping of furniture.
• Attach one of the mounting brackets “D” securely to
the back top edge of the unit using the short screw “E”.
• Mark the location on the wall for mounting the second bracket "D".
Drill the appropriate sized hole in the wall and insert the plastic screw anchor "C".
Then secure the bracket to the wall using screw "B".
• Place the unit so the bracket on the back edge of unit is in line with the bracket on the wall.
Instructions
Tipping restraint
B
D
C
D
E
A
• Lace the end of the nylon restraint strap “A” through
each bracket. Bring both ends together and slide the beaded
end of the strap through the keyhole shaped slot on the other
end. Pull down on the beaded end until it snap-locks into the keyhole.
• Check to make sure the strap is securely laced and locked to the brackets.
TIPPING RESTRAINT
HARDWARE
AA
A1
EE
E1
Ø6
CC
C1
BB
B1
DD
D2
•
•
•
•
•
1 nylon strap
1 ½”screw
1 plastic screw anchor
2 wall brackets
1 small screw