Home Styles Umbria Grey 88 5680 80 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5680 80
Arm Chair
Hex Wrench
1 Pc.
Small
Hex Wrench
1 Pc.
M6x20
Head Cap Bolt (short)
6 Pcs.(+1 extra)
M6x25
Head Cap Bolt
2 Pcs.(+1 extra)
A.
Seat
1 pc.
B.
Back
1 pc.
C.
Leg
1 pc.
D.
Leg
1 pc.

Assembly Instructions 2
Figure 2
/2
Head Cap Bolt
Head Cap Bolt (short)
IMPORTANT
* Do not tighten all the Head Cap Bolts until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
A
B
STEP 1
STEP 2
Attach Back (B) to Seat (A) with
Head Cap Bolts, tightening
the bolts only half way.
(See Figure 1)
Attach Legs (C) and (D) to unit with
Head Cap Bolts (short), tightening the bolts only half way.
(See Figure 2)
Tighten all Head Cap Bolts used in Steps 1 and 2.
Turn unit to its’ upright position.
Figure 1
C
D