Home Styles Modern Craftsman 5050-20 User manual

Hardware List
Part List
5050-20
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Tool(s) required for assembly: Phillips screwdriver
End Table
C.
Side Frame
2 pcs.
B.
Stretcher
2 pcs.
A.
Cabinet
1 pc.
D.
Shelf
1 pc.
M6x12
Head Cap Bolt
8 pcs. (+1 extra)
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M4x12
Wood Screw
4 pcs.(+1 extra)
Flat Washer
8 pcs. (+1 extra)
Spring Washer
8 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Assembly Instructions 2/3
Flat Washer
Spring Washer
Head Cap Bolt
Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Drawer Stop
STEP 2
Remove drawer from Cabinet (A).
Rotate drawer stop into position.
(See Figure 2)
STEP 1
Attach Stretchers (B) and Shelf (D) to Side Frames (C) with Flat Washers,
Spring Washers and Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Tighten all bolts.
Figure 2
A
B
B
C
C
D

Assembly Instructions 3/3
STEP 3
Place Cabinet (A) upside down
on a soft cloth.
Attach unit from Step 1 to Cabinet (A)
with Wood Screws.
Wood Screw
A
STEP 4
Turn unit over to its upright position.
Remove handle on inside of
drawer and attach to outside of
drawer with machine screws.
Slide drawer into position.
Machine Screw
Handle

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 1 year of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460