HOME8 TripleShield C2S6 User manual

Model No. OPG2201
What’s inside:
1x Security Shuttle 2x Wi-Fi Cameras 1x External Siren
2x Door + Window Sensors 1x Infrared Motion Sensor 2x Keychain Remote
2x Power Adapters
2x Extension Cables
Mounting
Accessories
16x
Broadband internet connection, iOS or Android phone and home router required.
TripleShield C2S6
Interactive Security System
Quickstart Guide
TM
4x Double-Sided Tapes
2x Batteries (CR123A)
1x Power Adapter
1x Ethernet Cable
16GB USB
Thumbdrive
1x
Mounting
Accessories
Double-Sided
Tape
6x
1 x
1x Double-Sided Tape
1x Battery (CR123A)

English
Step 1: Assemble your hardware
Step 2: Set up your smartphone
Unpack all of your hardware within 1-10 feet of your home router.
• Connect Security Shuttle to your DHCP-enabled router with the included Ethernet cable
• Connect Security Shuttle and Wi-Fi camera to power adapters and plug them in
• Add batteries to your Door + Window sensors
Your phone will disrupt the setup process if it goes to sleep. So before you register your devices,
disable the autolock feature on your smartphone. You can enable it after you’ve set up your
system.
1-10 ft
Next:
• Connect your smartphone to your home Wi-Fi
• Download the Home8 app from the App Store or Google Play
• Follow the on-screen instructions and set up your account

English
Step 3: Mount your devices
Before you mount your sensors, see if they’re within Security Shuttle’s range.
•Take your sensors to the rooms you want to use them in
• Open the battery cover of each device you want to install
If you get a notification that says your device has been tampered with, it’s within range.
Replace the battery cover and mount the device with the included screws or double-sided tape.
Battery
Battery
Before you mount your cameras:
• Take them to the room you want to use them in and plug them in
• Wait for your cameras to connect
If you see video, place your cameras and enjoy.

Can I save the video(s) recorded on the flash drive to my PC?
We take your security seriously. There are two levels of security steps we provide to ensure
your data are secured. First, it is required all users to go through an authentication process
with encrypted transmission during sign-in. Secondly, after the authentication process,
everything is encrypted via the internet; Home8 App uses bank-level AES data encryption.
How can I be certain other people are not stealing my identity on the cloud?
While we cannot email you the existing account password, you may request for a new
password by going to the Home8 App login page, and tap the “Forgot password?” link and
then go through the steps to request a randomly generated password to be sent to your
registered email. (Password can be changed by tapping on the Sidebar Menu button on the
app Main Menu, and then tap “My Profile”)
How do I retrieve my Home8 Mobile App password?
With your privacy in mind, we store your videos locally. Event-triggered video recordings
are stored on your local flash drive plugged in your Security Shuttle USB port, and for the
live video clips manually recorded, they are stored on your smart device.
How can I be sure unauthorized people are unable to look at my videos on the cloud?
Home8 App is built to support multi-location management. You can manage as many
locations as you would like, and we do not place a limit on the number of Home8 Systems
you can purchase.
How many locations can I manage from my Home8 App?
FAQ
Yes! You can take the USB flash drive from the Security Shuttle and plug it directly to your
PC and access the recorded video.
(Remember to plug the USB flash drive back into the Security Shuttle when finished.)

How can I be sure unauthorized people are unable to look at my videos on the cloud?
FAQ
We recommend you to change your password as soon as possible by using any of the following
methods to sign in to your account to make the change to the password:
- Use a smart device with Home8 App installed.
- Visit https://web.home8systems.com on a web browser.
Alternatively, you may also contact us to disable your account for you.
If I lose my smartphone, what should I do?
Because Home8 System is a fully IoT interactive system, it will require the following:
- Broadband Internet connection (dial-up connections are not supported)
- Internet Router with an available LAN port.
- Smartphone with a Data Plan (for using the App features such as push notification, and video
streaming)
What are the requirements prior to purchasing an Home8 System?
Yes, visit www.home8systems.com , and then access user manuals.
Is there a place I can view the user manual online?
If a camera is showing as “offline”, try power cycle on the camera first and wait approximately
two minutes, if the offline situation persists, try moving the camera closer to the Security
Shuttle and power cycle the device again. After tried the methods above, if the offline status is
still not resolved, please contact our Technical Support for further troubleshooting assistance.
What can I do if a camera is offline?
What can I do if my system is offline?
First, try checking your internet connection, if the connection is working properly, then unplug
the network cable from your Security Shuttle for 10 seconds, and then reconnect it. If the
Security Shuttle is still offline after 5 minutes, please contact our Technical Support for further
troubleshooting assistance.

V 2.0
Troubleshooting Tips
If you’re having trouble installing your devices, see if they’re listed in your Home8 app:
• Navigate to > Device Management to see if all your devices are listed
• Tap + next to the device category and follow the on-screen instructions to add any missing devices
Are your devices listed in your app?
Are your devices communicating with Security Shuttle?
• If your devices don’t connect to Security Shuttle, they might be too far away. Take them to a location that’s closer to
Security Shuttle and try again.
• If they do connect, you’ll know the range of your device and where to install a range extender.
• Alternatively, you can move Security Shuttle closer to your device.
• If your devices still don’t communicate with Security Shuttle, even when they’re in the same room, navigate to >
Device Management > + on the Home8 app to add your devices again.
V1.0
99200207MIG
Do you need to reset your camera?
If your camera isn’t communicating with Security Shuttle, your app may ask you to reset your camera.
• Push and hold the reset button locate on the backside of the camera over 5 seconds
• Return to the app and follow the onscreen instructions
Need help installing your Home8 system?
http://www.home8alarm.com/download/
[e-mail]