Homebase 509041 User manual

EXTENDING TABLE
SET CHAIRS
INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before using the product and retain for future use.
HHGL Limited Witan Gate House, 500-600 Witan Gate, Milton Keynes, MK9 1BA
Solid rubberwood
H94 x W43.5 x D52.5cm
Set of 4

1
33
22
44
5
4
23
ASSEMBLY INSTRUCTIONS
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START
ASSEMBLING. IF YOU DO FIND THAT SOMETHING IS MISSING, DO NOT
CONTINUE ASSEMBLY. PLEASE CONTACT YOUR LOCAL STORE IMMEDIATELY.
Parts Fittings
Bolts
Spring washer
Flat washer
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY CLAIM AND MAY
DAMAGE THIS PRODUCT MAKING IT UNSAFE.
No.
A
B
C
D
E
Qty
x 24
x 24
x 24
x 32
x 1
Screw
Allen key
No.
1
2
3
4
5
Qty
x 4
x 8
x 4
x 8
x 4
Description Description
Chair back
Side stretchers
Bottom stretchers
Front section
Chair seat
Step 1
EAB
C
2
Repeat steps
for both sides
D
4
Attach the Side Stretchers (2) to the Chair Back (1) with Bolt (A),
Spring Washer (B) and Flat Washer (C). Tighten up using the Allen Key (E).
Next, insert the Bottom Stretcher (4) to Chair Back (1) with Screw (D)
and use a Phillips Screwdriver (not provided) to drive Screw (D). Do not
tighten completely at this time.
1
4
4
Step 2
ABC E
D
2
3
Attach the Front Section (3) to the Side Stretchers (2) and Bottom Stretchers (4).
Fasten (3) to (2) with Bolt (A), Spring Washer (B) and Flat Washer (C). Use the Allen
Key to tighten (A). Fasten (3) to (4) with Screw (D) and use a Phillips Screwdriver
(not provided) to drive Screw (D). Fully tighten all the bolts and screws at this time.
2
Place the Seat (5) bottom-side up on an elevated surface. Position the
chair frame assembly with the legs facing up as shown. Centre the seat
frame to the seat (5). Use a Phillips Screwdriver to drive Screw (D) to
fasten the seat to the Chair Frame.
Step 3
ASSEMBLY COMPLETE
3
5
1
D
PHILLIPS
SCREWDRIVER
D