Homebase BROOK User manual

INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before using the product and retain for future use.
BROOK
2 SEATER SOFA
HHGL Limited, MK9 1BA; HHGL (ROI) Limited, D02 X576
H85 x W141 x D85cm

General care for fabric:
ASSEMBLY INSTRUCTIONS
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START
ASSEMBLY. IF YOU DO FIND THAT SOMETHING IS MISSING, DO NOT
CONTINUE
Parts:
x 4
Fittings:
No.
A
A
C
D
C
E
Qty
x 8
x 1
x 4
Description
Allen key
Bolts
Washers
ASSEMBLY. PLEASE CONTACT YOUR LOCAL STORE.
Do not use harsh detergents or cleaning fluids on your fabric. To clean, use a soft damp cloth (water only) followed by a
clean, dry cloth. To remove dust, please use the soft brush attachment on a vacuum cleaner.
Feltpads
AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY WARRANTY,
No.
1
2
3
4
5
6
F
B
Qty
x 1
x 1
x 1
x 1
x 1
x 1
x 2
x 2
Description
Sofa frame
Sofa back
Sofa right seat cushion
Sofa left seat cushion
Sofa right back cushion
Sofa left back cushion
Sofa front legs
Sofa back legs
1
1
1
B
B
FFD
D
1
2
2
4
4
FF
B B
3
3
6
6
5
5
Place the sofa frame (1) side up on a clean and stable surface.
Screw on sofa front chair legs (F) with washers (D), as illustrated in step 1.
Assemble all bolts finger-tight until back legs have been attached, then tighten
with the allen key (C) provided.
Attach sofa back legs (B) using bolts (A), as illustrated in step 2.
Stick the felt pads on the sofa legs, as illustrated in step 3.
Attach the sofa back (2) onto the sofa frame (1), as illustrated in step 4.
Finally, put the sofa seat cushions and back cushions on the sofa frame (1),
as illustrated in step 5.
Step 1
Step 4 Step 5
Step 2 Step 3
1
E
E
E
E