Homebase PANAMA 066506 User manual

Dimensions
Width - 62cm
Depth - 60cm
Height - 88cm
Issue 1 - 26/05/10
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08450 778 888
Assembly Instructions - Please keep for future reference
Panama Chair with Cushion
066506
Important –

•
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make su re you have enough
space to layout the parts before
starting.
• Do not stand or put weight on the
product during assembly, this could
cause damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
chair or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws ,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
Care and mainte nance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
r
the e are no loose screws on
• F om time to time check that
r
this chair.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Do not fully tighten all screws
until assembly is complete.
• Make sure each screw
matches the corresponding
gure to ensure correct
assembly.
• Maximum safe seated
weight: 110kgs.

Components - Parts
Please check you have all the parts listed below
2
Armrest x2 (62x 46cm)
2
Back board x1 (86x45cm)
1
34
Seat board x1 (44x36/46cm) Front board x1 (48x30 cm)
Co mponents - Fittings
If you have damaged or missing components,
call the Customer Helpline: 08450 778 888
Allen key x 1 Cushion x 1
Note:
The quantities below are the correct amount to complete the assembly. In some cases more
A
Metal washer x 8
B
Plastic cap x 8
C
F
D E
Plastic washer x 8
30mm Screw x 8
fittings may be supplied than are required.
Please check you have all the fittings listed below

Assembly Instructions
Step 1
Assembly frame
Step 2
Important:
Do not fully
tighten all screws
until assembly is
complete.
3
Use 30 mm screw
and metal washer
with plastic washer
to fix the armrest
to the back board.
Repeat above step
for each of the 4
positions.
Use 30 mm screw
and metal washer
with plastic washer
to fix the armrest
to the front board.
Repeat above step
for each of the 4
positions.
A
B
D
2
11
2
2
A
B
D
DBA
2
2
4
4
A
B
D
2
4
.
.
1

Assembly Instructions
4
Step 3
Turn the armchair to the
upright position and
tighten all the screws.
with the Allen key .
Seal the screws
with plastic cap
Step 4
C.
Fit the seat board
onto the armchair
assembly with the seat
side uppermost
3
C
3
E

AssemblyInstructions
5
Step 5
Put on the cushion
to fit for the seat board.
F
If you need help or have damaged or missing parts, call the Customer Helpline: 08450 778888
Homebase Limited
489-499 Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks,MK9 2NW
F
FF
Assembly is complete.

Dimensions
Width - 45cm
Depth - 45cm
Height -40cm
Issue 1 - 26/05/10
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08450 778 888
Assembly Instructions - Please keep for future reference
Panama Coffee Table
072038
Important –

This product is
manufactured from
toughened safety glass.
In the unlikely event that
the glass fails it will break
in to a large number of
small fragments that may
be spread over a wide
area. This is a feature of
toughened glass,
designed to remove the
risk of injure from glass
breaking into large shards.
If the glass is chipped
or broken, stop using the
product and consult the
manufacture or supplier.
Check you have all the
components and tools
listed on page 2.
Remove all fittings from
the plastic bags and
separate them into their
groups.
Keep children and
animals away from the
work area, small parts
could choke if swallowed.
Make sure you have
enough space to layout
the parts before starting.
Do not stand or put
weight on the parts during
assembly, this could
cause damage.
Assemble on a soft
level surface to avoid
damaging the unit or your
floor.
Dispose of all packing
carefully and responsibly.
Do not sit or stand upon
horizontal glass surface.
Do not place very hot or
very cold items on the
glass unless adequately
thick tablemats are used to
prevent such items from
coming into contact with
the glass.
The unit
weights approximately
kgs.
Warning:
Please lift with care.
Wash glass with mild
soap and water, rinse
thoroughly, and dry glass
completely.
We recommend the use
of furniture covers when
not in use.
Do not use the glass as
chopping surface. Do not
strike the glass with hard
or pointed items.
In order to prolong the
life and beauty of your
table, we recommend it be
stored in a dry and
protected area during off
season periods.
Do not use washing
powders or any abrasive
substances which may
scratch the surface.
5.7

Components - Parts
Please check you have all the parts listed below
2
2
Main board x 2 Side board x 2
1
3
Glass x 1
If you have damaged or missing components,
call theCustomer Helpline: 08450 778 888
Note:
The quantities below are the correct amount to complete the assembly. In some cases more
AB
Metal washer x 8
C
Allen key x 125mm Screw x 8
fittings may be supplied than are required.
Please check you have all the fittings listed below
Components - Fittings
Plastic support x 4
D(Have already fixed on the table rim)

Assembly Instructions
Step 1
Assembly frame
Step 2
Important:
Do not fully
tighten all screws
until assembly is
complete.
A
B
1
1
1
3
2
2
A
A
B
3
Use 25mm screw and
metal washer fix main
boards 1 to side boards
2 .
Turn the table to its upright
position and put on the
glass 3 . Tighten the
screw .
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 08450 778888
Homebase Limited
489-499 Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks,MK9 2NW
Important:
Make sure the
plastic support
not detached from
table rim.
D
D