Homebase 609865 User manual

Ref. no BTOFST002 Date: 04/2021
400 Floorstanding Cloakroom
Assembly Instructions - Please keep for future reference
Important - Please read these instructions fully before starting assembly
Dimensions
For all enquiries please contact : 0333 241 2701
Width - 40cm
Depth - 22cm
Height - 82.8cm
609865
609874

Safety and care advice
Getting started - Please read these intructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Recycling – the packaging materials for this product may
be recycled through your local recycling centre. When you
want to dispose of the product itself, please consider
donating it to a local charitable organisation, otherwise
recycle it through your local recycling centre.
• Check the pack and make
sure that you have all parts.
If not contact your local store
who will be able to help you.
• When you are ready to start,
make sure that you have the
right tools on hands, plenty of
space and a clean dry area for
furniture assembly.
• Ensure there are no hidden
service pipes and cables where
you intended to drill.
• Always ensure that screws
locate exacly into pre-drilled
pilot holes.
• Take care not to overtighten
any of the screws.
• Check to ensure that all components and fixings of this product are secure, do not use if you have any
doubts about its fitness for purpose. Ensure that your bathroom is well ventilated and avoid placing
furniture near the bathtub or shower.
• Warning:
Serious or fatal crushing
injuries can occur from furni-
ture tip-over.
To prevent this furniture from
tipping over it must be
permanently fixed to the wall
with the included wall attach-
ment devices.
Fixing devices for the wall are not
included since different wall
materials require different types
of fixing devices. Use fixing
devices suitable for the walls in
your home.
For advice on suitable fixing
systems, contact your local
specialized dealer.
• For domestic use only. • Periodic structural checks of
this product should be
undertaken, do not use if you
have any doubts about its fitness
for purpose.
• Do not let children play with this
product.
In more detail
• Use a soft dry cloth to clean
the surface of the cabinet and
the counter top.
• Do not leave any standing
water on the cabinet. Remove
any water immediately.
• Never use any solvents,
scourers, abrasives, bleach,
acids, strong detergents,
aggressive chemical cleaners or
solvent-type cleaning solutions
on the product.
Regular checking
Safety
2

Bracket x 2 Cover x 2
Ruler - Use this ruler to help correctly identify the screws
Tools required
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
D
mm
Fittings
Please check you have all the fittings listed below
Washer x 2
C
0 0 20 30 40 50 60 70 80 90 00 020304050
023456
Phillips screwdriver
(medium & large)
Spirit level
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Drill
Ø 8mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Cover x 4
GH
B
F
Bump x 2
13mm Screw x 6
L
15mm Screw x 4
E
J
Shelf pin x 4 Clip hinge x 2
K
H1
Push
latch x 1
Hinge
mounting
plate x 2
3

Assembly Instructions
Step 1
Fix the bracket
Step 2
Mark the location of the bracket against the wall
A
A
A
G
G
4

No.3 "Shield Anchor" Wall Plug
Heavy Loads
For use with heavier loads such as TV
& HiFi Speakers and Satellite Dishes etc.
No.4 "Cavity Fixing" Wall Plug
For use with plaster board partitions or
hollow wooden doors.
No.5 "Cavity Fixing - Heavy Duty"
Wall Plug
For use when fitting or supporting heavy
loads such as shelving, wall cabinets,
coat racks.
IMPORTANT:
When drilling into walls always check that there are no
hidden wires or pipes etc. Make sure that the screws and
wall plugs being used are suitable for supporting your unit.
Consult a qualified tradesperson if you are unsure.
HINTS:
1) General Rule Always use a larger screw and wall plug if you are not sure.
2) Ensure you use the recommended drill bit to match the wall plug and hole size.
3) Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4) Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the plug is fitting below the ceramic
tile to avoid splitting or cracking.
5) Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types Of Walls
You can use one of the following types
of wall plug if your walls are made of
brick, breeze block, concrete, stone,
wood or plaster board.
No.1 "Standard" Wall Plug
General Wall Materials
These come in various sizes and are made
from plastic or sometimes wood fiber.
No.2 "General Purpose" Wall Plug
Aerated / Breeze Block
Generally aerated blocks should not be
used to support heavy loads, use a
specialist fitting in this case.
For light loads, a General Purpose Plug
can be used.
No.6 "Hammer Fixing" Wall Plug
For use with walls stuck with plaster
board. The hammer fixing allows it to
be fixed to the wall rather than the plaster
board. Always check the fixing is secure
to the retaining wall.
CARE & MAINTENANCE
SAFETY
Always check the fitting and
location to ensure your safety in
and around the home.
FITTING
From time to time check the fitting
to ensure the wall plugs or screws
do not become loose.
Wall Mounting & Fixings
A Guide to
5

Assembly Instructions
Step 3
Step 4
Fix wall anchor into the wall
Fix the bracket to the wall
Ø8 x 2 (not included)
x 2 (not included)
x4
C
A
C
C
A
A
6

Assembly Instructions
Step 5
Insert cover
Door
E
K
E
K
Step 6
Fix the clip hunge
B
BB
7

Assembly Instructions
Step 7
Fix hinge mounting plate
L
L
L
L
L
L
8

Assembly Instructions
Step 8
“CLICK”
K
K
L
L
K
K
L
L
Fix the door
K
K
L
L
9

Assembly Instructions
Step 9 A
Fix push latch
H
G
H1
Fx2
H
G
H1
Fx2
H
H1
F
H
H1
F
Fx2Dx2
10

S
Soft closing deactivation
Assembly Instructions
tep 9 A
OFF
OFF
Push latch adjustment
2
mm
tep 9 A
S
11

Assembly Instructions
Step 9 B
Fix the handle
Fx4
F
F
Fx4
F
F
Gx2
H1
H
handle not included
handle not included
D
D
D
D
D
D
12

S
Soft closing setting
Assembly Instructions
tep 9 B
ON
OFF
OFF
ON
13

Assembly Instructions
Step 10
Step 11
Insert shelf
J
1
2
3
Shelf
Shelf
J
J
washbasin not included
Remove protective films and insert washbasin
14

Assembly Instructions
Step 12
Remove protective films
Step 13
Adjustment door
15

Assembly Instructions
Step 14
Total max weight of shelves loading 3kg each
kg
16

Assembly Instructions
Recycling – the packaging materials
for this product may be recycled
through your local recycling centre.
When you want to dispose of the
product itself, please consider
donating it to a local charitable
organisation, otherwise recycle it
through your local recycling centre.
CLEANING INSTRUCTIONS
This product has been manufactured using
modern manufacturing methods and
materials. With appropriate in-home care
and maintenance it will provide trouble free
performances. Many domestic multi-
purpose cleaning agents are unsuitable for
use on this product. The use of aggressive
chemicals can result in irreversible
damage. Please follow these guidelines
carefully.
USE only 5% soap, 95% water solution,
wiping with a damp (not wet) cloth. Finally
dry with a soft clean cloth. Dust with a soft
clean cloth only.
DO NOT USE wax furniture polish, abra-
sive or aggressive cleaners, bleach or
hypochlorate (chlorine) based cleaners,
multi-purpose cleaners, dilutes, acetone,
alcohol, solvent or similar products.
That's the Stool completed.
Take care of your unit by using a damp cloth to clean it.
Please remember to occasionally check that all Cams
and Screws are tight.
17

18

19

20