Homebase BAMBRICK SQUARE TABLE 586583 User manual

Powder-coated steel frame
Toughened glass table top
H74 x W90 x D90cm
BAMBRICK
SQUARE TABLE
INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before using the product and retain for future use.
HHGL Limited, MK9 1BA, HHGL (ROI) Limited, D02 X576

2
SAFETY & CARE ADVICE
IMPORTANT INFORMATION
Please read these instructions fully before starting assembly.
• This product is made from toughened glass, which is strong but not unbreakable. In the unlikely
event that the glass fails, it will break into a large number of small fragments that may be spread over
a wide area. This is a feature of toughened glass, and is designed to remove the risk of injury from
glass breaking into large shards.
• If the glass is chipped or broken, stop using the product.
• Tables should not be dragged at any time.
• Do not strike or place heavy weight on the table.
• Do not place hot items directly onto the glass.
• Avoid dropping objects on the glass, as this may weaken or shatter it.
• Do not use the glass as a chopping surface.
• Do not strike the glass with hard or pointed items.
• Check you have all the components and tools listed in this booklet before assembly.
• Remove all fittings from their plastic bags and separate them into their groups.
• Keep children and animals away from the work area; small parts could choke if swallowed.
• Make sure you have enough space to lay out the parts before starting.
• Do not stand or put weight on the component parts during assembly, as this could cause damage.
• Assemble on a soft, level surface to avoid damaging the table or your floor.
• We recommend a two-person assembly.
• Dispose of all packaging carefully and responsibly.
• Regularly check all the bolts, screws and fastenings are secure.
• Only clean using a damp cloth and mild detergent; do not use bleach or abrasive cleaners.

R u le r - U s e th is ru le r to h e lp co rre ctly ide n tify th e s cre ws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
3
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
Allen key
Tools included
F1
Please check you have all components
listed below. If you have any missing or
damaged components, please contact
your local store.
COMPONENTS - PANELS
A
Glass top
Table rim
Table legs
B
C
1
1
4Washers
Screws
D
E
8
M6x20
8

ASSEMBLY INSTRUCTIONS
Step 1
Fit the four table legs Cto the table frame B,using screws Dand washers E with allen key F.
Step 2
Carefully place the glass top Aonto the table.
C
B
D
A
E
ASSEMBLY COMPLETE