HOMEDEPOT MF212155AAB User manual

PAGE 1 OF 10
ITEM: 226T
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB
WEIGHT LIMIT
400 LBS
WEIGHT LIMIT
400 LBS
PLEASE DO NOT RETURN PRODUCT TO THE STORE.
If you have any problem or concerns, please feel free
to contact our customer service department.
Please send your request to the following contact
details according to the platform you purchased.
Walmart Platform:
E-mail : [e-mail]
Tell: 626-912-8886 Ext. 100

PART LIST-MF212155AAB
PART LIST-MF212156AAB
PAGE 2 OF 10
vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc
vertical bar - 2pcs
guard bar - 2pcs
horizontal bar - 2pcs
horizontal bar - 1pc horizontal bar - 1pc horizontal bar - 1pc
horizontal bar - 1pc
hand rail - 1pc headboard - 1pc
headboard - 1pc footboard - 1pc
footboard - 1pc horizontal bar - 1pc guard handrail - 1pc
vertical bar - 1pc
slat - 4pcs slat - 20pcs horizontal bar - 9pcs wooden shelf panel - 1pc
wooden shelf panel - 1pcwooden shelf panel - 1pcwooden shelf panel - 1pc

PART LIST
1 2 3 4 5 6
78 9 10 11
13 14 15 16
1
4
2
3
5
6
7
9
9
18
8
10
14
11
12
15
1617
20
21
22
24
19
25
26
27
28
13
23
12 17
21
hand rail - 1pc
guard bar - 2pcs headboard - 1pc
footboard - 1pc horizontal bar - 1pc vertical bar - 1pc horizontal bar - 1pc horizontal bar - 1pc
vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc vertical bar - 1pcvertical bar - 1pc
headboard - 1pc
PAGE 3 OF 10
vertical bar - 1pc vertical bar - 1pc
footboard - 1pc
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB

SAFETY WARNINGS AND GENERAL NOTES :
*Do not allow children under 6 years of age to use the upper bunk.
*The top surface of the mattress must be at least 5* (127mm) below the upper edge of the guardrail.
*Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls.
*Periodically check and ensure the guardrail, ladder and other components are in their proper position, free
from damage, and all connectors are tight.
*Always use the ladder for entering and leaving the upper bunk.
*Prohibit horseplay on or under beds. Always prohibit jumping on the bed.
*Do not use substitute parts.Contact the manufacturer or dealer for replacement parts.
*Follow the information on the warnings on the bunk bed end structure and on the carton.
Do not remove the warning label from the bed.
*Prohibit more than one person on upper bunk.
Ø1/4"*60mm
A
Ø1/4"*40mm
4*58mm
B
Ø1/4"*28mm
C
Ø1/4"*15mm
D
H
HARDWARE LIST-MF212155AAB
PART LIST
18 19
25
27
24
28
20 21
Ø33x10mm
E
Ø42x10mm
F
slat - 20pcs
horizontal bar - 2pcs
slat - 4pcs
guard handrail - 1pc
horizontal bar - 1pc
horizontal bar - 1pc
horizontal bar - 9pcs wooden shelf panel - 1pc
wooden shelf panel - 1pc
PAGE 4 OF 10
This set is included 2 boxes if don't receive full 2 boxes please contact our customer service team.
Bolts - 37pcs Bolts - 22pcs Bolts - 18pcs Bolts - 22pcs
Pipe plug - 8pcs Pipe plug - 2pcs Allen key - 1pc
wooden shelf panel - 1pcwooden shelf panel - 1pc
26
2322
*Always use guardrails on both long sides of the upper bunk.
*Use of a night-tight may provide added safely precaution for a child using the upper bunk.
*We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.Be certain all
staples are out of the box before beginning assembly on the shipping carton.
*Keep these instructions for future reference.
*The use of water or sleep flotation mattresses is prohibited.
*If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and the wall.
STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not designed
for use with the bed; for example, but not limited to, hooks, belts, and jumping ropes.
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB

Ø1/4"*60mm - 4pcs
H
F
A
Ø33x10mm - 2pcs
STEP 1:Following below illustration Assembly FRAME #1.
Using hardware #D connect #1, #2, #4 vertical bar
with #3 hard rail to complete FRAME #1
Ø1/4"*40mm-1pc
B
H
Ø1/4"*15mm -3pcs
D
F
A
D
1
2
3
4
18
19 A*4
B*1
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
NOTE:In this step, DO NOT tighten
any bolt until you connect all part together
STEP 2:Following below illustration Assembly FRAME #2. Using hardware #A, #B connect #18, #19
horizontal bar with FRAME #1 to complete FRAME #2
PAGE 5 OF 10
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB

Ø1/4"*60mm - 11pcs
H
A
Ø1/4"*40mm - 3pcs
B
Ø1/4"*15mm - 1pc
D
D
A
H
H
D
E
E
Ø42x10mm - 4pcs
E
5
6
13
14
15
16
17
12
10
11
A
A*5
A*6 B*1
B*2
D*1
A*4
E*4
E*4
STEP 3:Following below illustration Assembly FRAME #3.
Using hardware #A, #B, #D connect #14, #15, #16 horizontal bar,
#12,#13 footboard and #17 vertical bar with #5,#6 vertical bar
to complete FRAME #3
A
H
E
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
STEP 4:Following below illustration Assembly FRAME #4.
Using hardware #A, #D connect #10,#11 headboard with #7, #8
vertical bar to complete FRAME #4
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
7
8
PAGE 6 OF 10
D*2
Ø42x10mm - 4pcs
Ø1/4"*60mm - 6pcs
Ø1/4"*15mm - 2pcs
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB

H
D
9
9
23
22
DH
H
D
21
21
22
23
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
STEP 5:Following below illustration Assembly FRAME #5.
Using hardware #D connect #9 guard bar with #22,#23 slat to complete FRAME #5
STEP 6:Following below illustration Assembly FRAME #6.
Using hardware #D connect #21 horizontal bar with #22,#23 slat to complete FRAME #6
PAGE 7 OF 10
Ø1/4"*15mm - 4pcs
Ø1/4"*15mm - 4pcs
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB

H
D
A
H
DB
20
24
24
D
HA
B
D
A*4
A*4
D*2
D*2
B*18
D*4
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
STEP 7:Following below illustration Assembly FRAME #7.
Using hardware #A,#D connect FRAME #3, FRAME #4 with FRAME #5, FRAME #6
to complete FRAME #7 (FRAME #5)
(FRAME #6)
(FRAME #3)
(FRAME #4)
(FRAME #2)
(FRAME #7)
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
STEP 8:Following below illustration Assembly FRAME #8.
Using hardware #B,#D connect #24 horizontal bar,#20 guard handrail with FRAME #2, FRAME #7 to complete FRAME #8
PAGE 8 OF 10
Ø1/4"*15mm - 4pcs
Ø1/4"*60mm - 16pcs
Ø1/4"*15mm - 4pcs
Ø1/4"*40mm - 18pcs
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB

H
C
H
C
wood
(FRAME #8)
STEP 9:Following below illustration Assembly FRAME #9.
Using hardware #C connect #25,#26,#27,#28 wooden shelf panel with FRAME #8 to complete FRAME #9
NOTE:Tighten all step before using. Thank you
PAGE 9 OF 10
Ø1/4"*28mm - 18pcs
25
26
27
28
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB

COMPLETED BUNK BED
PAGE 10 OF 10
BUNK BED
ASSEMBLY INSTRUCTIONS
MF212155AAB & MF212156AAB