HoMedics BPA-201 User manual

BPA-201
Ver. B
El manual en español
empieza en la página 34
Automatic
Blood Pressure Monitor
P
l
e
a
s
e
T
a
k
e
A
M
o
m
e
n
t
N
o
w
Register
Your Product At:
www.homedics.com/register
Your valuable input regarding this
product will help us create
the products you will
want in the future.

1
TABLE OF CONTENTS
INTRODUCTORY INFORMATION:
Important Product Notices and Safety
Instructions.............................................................3
About Blood Pressure ...........................................5
Blood Pressure Standard ......................................5
How This Blood Pressure Monitor Works ...........7
USAGE INFORMATION:
Name/Function of Each Part .................................8
Display Explanations .............................................9
Installing Batteries...............................................11
Using the AC Adapter ..........................................12
Date & Time Set Procedure.................................13
Using the Cuff.......................................................14
Measurement Procedure.....................................18
Risk Category Index.............................................21

2
Irregular Heartbeat Detector ..............................22
Recalling Values from Memory...........................23
Clearing Values from Memory ............................24
Important Notes Regarding Your
Blood Pressure Measurement ............................25
Care, Maintenance & Cleaning............................26
Potential for Electromagnetic Interference .......28
Electromagnetic Compatibility (EMC)................29
Troubleshooting....................................................31
Specifications .......................................................32
5 Year Limited Warranty ......................................33

3
IMPORTANT PRODUCT NOTICES AND
SAFETY INSTRUCTIONS
When using your blood pressure monitor, basic precautions
should always be followed. Please read and follow all instructions
and warnings before using this product. Save these instructions for
future reference.
• Please note that this is a home healthcare product only and
it is not intended to serve as a substitute for the advice of a
physician or medical professional.
• This device uses the oscillometric method to measure systolic
and diastolic blood pressure, as well as heart rate.
• Do not use this device for diagnosis or treatment of any health
problem or disease. Measurement results are for reference only.
Consult a healthcare professional for interpretation of pressure
measurements. Contact your physician if you have or suspect
any medical problem. Do not change your medications without
the advice of your physician or healthcare professional.
• Proper cuff size is critical for accurate measurements. Follow the
instructions in this manual and printed on the arm cuff to ensure
the appropriate size of cuff is being used.
• This product is not suitable for people with arrhythmias. This
device may have difficulty determining the proper blood pressure
for pregnant women and for users with irregular heartbeat,
diabetes, poor circulation of blood, kidney problems or for users
who have suffered from a stroke.
• Excessive use may result in blood overflow interference,
which is likely to cause uncomfortable sensations, such as
partial subcutaneous hemorrhage, or temporary numbness to
your arm. In general, these symptoms should not last long.
However, if you do not recover in time, please seek advice
from a medical professional.

4
• The pulse display is not suitable for checking the frequency of
heart pacemakers.
• Electromagnetic interference: The device contains
sensitive electronic components. Avoid strong electrical or
electromagnetic fields in the direct vicinity of the device (e.g.
mobile telephones, microwave ovens). These may lead to
temporary impairment of measurement accuracy.
• Consider the electromagnetic compatibility of the device (ex.
power disturbance, radio frequency interference etc.) Please
use this device indoors only.
• Use blood pressure monitor only for its intended use.
• Do not wrap the cuff around body parts other than your arm.
• Not for use by or on persons under the age of 18.
• Do not use this device on infants, children, or those who cannot
express their own intention.
• Do not plug or unplug the adapter power cord with wet hands.
• Please use only the AC adapter included with this monitor or
1.5V "AA" alkaline batteries for power supply.
Blood pressure measurements determined with this device
are equivalent to those obtained by a trained observer using
the cuff/stethoscope auscultatory method, within the limits
prescribed by the American National Standard, Manual,
electronic, or automated sphygmomanometers.

5
ABOUT BLOOD PRESSURE
What is Blood Pressure?
Blood pressure is the pressure exerted on the artery
walls while blood flows through the arteries. The pressure
measured when the heart contracts and sends blood
out of the heart is systolic (highest) blood pressure. The
pressure measured when the heart dilates with blood
flowing back into the heart is called diastolic (lowest)
blood pressure.
Why Measure Your Blood Pressure?
Among today’s various health problems, those associated
with high blood pressure are very common. High blood
pressure dangerously correlates with cardiovascular
diseases. Therefore, blood pressure monitoring is
important for identifying those at risk.
BLOOD PRESSURE STANDARD
The table on page 6 contains defined levels for hypertension
that are publicly available from the National Heart Lung and
Blood Institute at the U.S. National Institutes of Health (NIH)
(http://www.nhlbi.nih.gov/health/dci/Diseases/Hbp/HBP_WhatIs.html).
Users can compare their own blood pressure readings against
these defined levels to determine if they may be potentially at
increased risk.

6
This table is applicable to most adults aged 18 and older.
Blood pressure tends to go up and down, even in people who
normally don’t have high readings. If your numbers stay above
the “normal” range most of the time, you may be at increased
risk and should consult your physician.
Category Systolic (mmHg) Diastolic (mmHg)
Normal Less than 120 and Less than 80
Prehypertension 120-139 or 80-89
High Blood Pressure
Stage 1 140-159 or 90-99
Stage 2 160 or higher or 100 or higher
Although one can easily find where their own blood pressure
readings fall on this table, this monitor comes equipped with a
Risk Category Index that automatically compares each reading to
the defined levels and provides a helpful cue if your reading falls
into one of the stages that could potentially indicate increased
risk. See page 21 for more information on this feature.
Please note that cues provided by this monitor are only
intended to assist you in using this table. The table and cues
are only provided for convenience to help you understand
your non-invasive blood pressure reading as it relates to
the NIH information. They are not a substitute for a medical
examination by your physician. It is important for you to
consult with your physician regularly. Your physician will tell
you your normal blood pressure range as well as the point at
which you may actually be considered to be at risk.

7
HOW THIS BLOOD PRESSURE MONITOR WORKS
This monitor uses innovative technology to detect your systolic
pressure, diastolic pressure and pulse. This technology enables the
monitor to automatically inflate and deflate at the appropriate level for
each individual. With one touch of a button, the cuff will automatically
inflate to block the blood flow through your artery. Next, the deflation
process starts. Please note that any muscle movement during inflation
or deflation will cause measurement error. When measurement is
complete, the monitor will display your systolic pressure, diastolic
pressure, and pulse readings.
The monitor automatically finds where your measurement results
fall on the NIH’s National Heart Lung and Blood Institute’s table and
provides a cue if your reading falls into one of the stages that could
potentially indicate increased risk. Please refer to page 21 for more
information on this feature.
The appearance of the icon indicates that a pulse irregularity
consistent with an irregular heartbeat was detected during
measurement. Refer to page 22 for more information on the Irregular
Heartbeat Detector.

8
NAME/FUNCTION OF EACH PART
USER-SELECT
Button
START/STOP
Button
MEMORY RECALL
Button
Air Tube
and Connector
DATE/TIME SET
Buttons
Arm Cuffs
LCD Display
Other Accessories Included: 1 6V DC Output AC Adapter
4 “AA” size, 1.5V alkaline batteries
Note: Please unload the batteries when operating
with the AC adapter for an extended period of time.
Battery Cover
(Located on
bottom of unit)

9
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time
Indicator
Pulse Pulse
Pulse
Pulse
Heart Rate

10
Systolic
Pressure
Display Symbols:
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the heart rate per minute.
Irregular Heartbeat Detector: Refer to page 22 for
more information.
Memory Average: Displays average of last 3 readings
Risk Category Index: See page 21 for more information.
If and any of the following letters and numbers appear in the area
that systolic pressure should be displayed, an error has occurred with your
reading. See Troubleshooting section of this manual for more information.
Measurement Error: Wrap the cuff correctly and keep arm steady during
measurement. Measure again.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear, then measure
again.
Error Determining Measurement Data: Measure again.
System Error: Measure again.

11
INSTALLING BATTERIES
1. Press down on latch and lift
the battery cover to open the
battery compartment.
2. Install or replace 4 “AA”
sized alkaline batteries in
the battery compartment
according to the indications
inside the compartment.
3. Close the battery cover by
pushing in the top end of
the battery door.
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace all
batteries at one time (as simultaneous set). Use only 1.5V “AA”
alkaline batteries. Remove batteries when unit is not in use for
extended periods of time. Date and time will need to be reset
if batteries are removed or replaced. Clean contacts on battery
and in battery compartment with a soft dry cloth each time you
install batteries.
Note:
Batteries are hazardous waste. Do not dispose of them together
with the household garbage.
Battery
Cover
Slide-Out
Tray

12
USING THE AC ADAPTER
1. Connect the AC adapter with the AC adapter jack as
shown below.
2. Please use only the AC adapter included with this
monitor.
Note:
• When the AC adaptor is your main power supply, make
sure the adaptor plug can be easily removed from the unit.
• Please unload the batteries when operating with an
AC adapter for an extended period of time. Leaving
the batteries in the compartment for a long time may
cause leakage, which may lead to damage to the unit.
• No batteries are needed when operating with
an AC adapter.
• Date and time will need to be reset if AC adapter is
unplugged and unit is without batteries.
AC Adapter
Input: 100-240V~0.18A 50/60Hz
Output: 6V DC 1A 6W Max
Connect
AC Adapter
here

13
DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the SET button
TALKING
MODE LANGUAGE
TALKING
MODE
.
2. The display will show a blinking number showing the HOUR.
Change the HOUR by pressing the
TALKING
MODE LANGUAGE
TALKING
MODE
button. Each press will
increase the number by one in a cycling manner. Press the SET
button
TALKING
MODE LANGUAGE
TALKING
MODE
again to confirm the entry, and the screen will show a
blinking number representing the MINUTE.
3. Change the MINUTE, MONTH, DAY and YEAR as described in
Step 2 above, using the
TALKING
MODE LANGUAGE
TALKING
MODE
button to change the numbers and
the SET button
TALKING
MODE LANGUAGE
TALKING
MODE
to confirm the entries.
Press the button
blinking HOUR
increasing HOUR
confirm the entry
repeat process to set MINUTE,
MONTH, DAY and YEAR
TALKING
MODE LANGUAGE
TALKING
MODE
TALKING
MODE LANGUAGE
TALKING
MODE
Pulse Pulse
PulsePulse
TALKING
MODE LANGUAGE
TALKING
MODE
TALKING
MODE LANGUAGE
TALKING
MODE

14
USING THE ARM CUFF
Very Important:
Proper cuff size is critical to accurate measurement.
This monitor comes with two sizes of arm cuffs:
Standard Size Fits 9”–13” (23 cm – 33 cm)
Large Size Fits 13”–17” (33 cm – 43 cm)
The appropriate cuff is suitable for your use if the
colored arrow falls within the solid color line as shown
below.
ARROW MUST FALL
WITHIN YELLOW BAND
ARROW MUST FALL
WITHIN YELLOW BAND
Center tube over
middle of arm
MODEL# PP-BPCUFF5
Position cuff
edge 0.6˝
–
1.0˝
(1.5
–
2.5cm) above elbow.
Center tube over
middle of arm.
Fit cuff securely. Allow room for
two fingers to fit between the cuff
and your arm.
Solid Colored Line
Colored Arrow

15
1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side without
the felt material should be on the inside of the cuff loop.
2. Plug the cuff tube into the left side of the unit.
ARROW MUST FALL
WITHIN YELLOW BAND
D-ring
End of cuff
2~3 cm
(0.8”~1.2”)
Position cuff edge
0.8
–
1.2inches(2
–
3cm)
above elbow.
Fit cuff
Allow
to fi
and
Cen
mi
Insert plug here

16
3. Open the arm cuff so that your arm may be placed
through it.
4. Remove tight fitting clothing from your upper left arm so
that the cuff can be wrapped around your exposed arm.
5. Position cuff edge 0.8-1.2
inches (2-3 cm) above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between
the cuff and your arm.
8. Lay your arm on a table (palm upward)
so the cuff is at the same height as
your heart. Make sure the tube is
not kinked.

17
Note:
• This device should not be used when your arm is
injured or wounded.
• If it is not possible to fit the cuff on your left arm, it
can also be placed on your right arm. However, all
measurements should be made using the same arm.
• To use on the right arm, you must position the artery
symbol “ ” over the main artery. Locate the main
artery by pressing with two fingers approximately 1”
(2 cm) above the bend of your elbow on the inside of
your right arm. Identify where the pulse can be felt the
strongest. This is your main artery.
Main Artery

18
MEASUREMENT PROCEDURE
Important Notes:
• Blood pressure changes with every heartbeat and is in
constant fluctuation throughout the day.
• Blood pressure measurement can be affected by the
position of the user, his or her physiologic condition
and other factors. For greatest accuracy, wait 1 hour
after exercising, bathing, eating, drinking beverages
with alcohol or caffeine, or smoking to measure blood
pressure.
• Before measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken during
a relaxed state will have greater accuracy. You should
not be physically tired or exhausted while taking a
measurement.
• During the measurement, do not talk or move your
arm or hand muscles.
• See page 25 for additional notes regarding your blood
pressure measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.

19
1. Press the USER-SELECT Button to choose User 1
or User 2.
2. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
3. After all symbols disappear, the display will show “00”. The
monitor is “Ready to Measure” and will automatically inflate
the cuff to start measurement.
Pulse
Pulse
Pulse
Pulse
Pulse
PulsePulse
Pulse Pulse
PulsePulse
/
START
STOP
3
OR
/
START
STOP
3