HoMedics BPW-040 User manual

Automatic Wrist
Blood Pressure Monitor
BPW-040
El manual en
español empieza
en la página 28
©2009-2010 HoMedics, Inc. y sus compañías afiliadas,
reservados todos los derechos. HoMedics es una marca
registrada de HoMedics, Inc. y sus compañías afiliadas.
Smart Measure™ son marcas registradas de HoMedics
Inc. y sus compañías afiliadas.
Reservados todos los derechos.
IB-BPW040A
P/N: 323101250 VER: 001
Por servicio o reparación,
no devuelva esta unidad al
distribuidor. Póngase en
contacto con Relaciones con
el Consumidor de HoMedics
por el:
Correo:
HoMedics, Inc.
Service Center
Dept. 168
3000 Pontiac Trail
Commerce Township,
MI 48390
Correo electrónico:
cservice@
homedics.com
Teléfono:
1-800-466-3342
Horario comercial:
8:30 am a 5pm Hora del Este
De lunes a viernes
HoMedics, Inc.
3000 Pontiac Trail
Commerce Township,
MI 48390
Impreso en China
®
Distribuido por
LA GARANTÍA AQUÍ ESTABLECIDA SERÁ LA ÚNICA Y
EXCLUSIVA GARANTÍA. NO HABRÁ NINGUNA OTRA
GARANTÍA EXPRESA NI IMPLÍCITA, INCLUYENDO
NINGUNA GARANTÍA DE COMERCIALIZACIÓN O
APTITUD NI NINGUNA OTRA OBLIGACIÓN POR PARTE
DE LA COMPAÑÍA CON RESPECTO A PRODUCTOS
CUBIERTOS POR ESTA GARANTÍA. HOMEDICS NO
TENDRÁ RESPONSABILIDAD ALGUNA POR NINGÚN DAÑO
INCIDENTAL, CONSECUENTE NI ESPECIAL. BAJO NINGÚN
CONCEPTO ESTA GARANTÍA REQUERIRÁ MÁS QUE LA
REPARACIÓN O CAMBIO DE ALGUNA PIEZA O PIEZAS
QUE SE HALLEN DEFECTUOSAS DENTRO DEL PERÍODO
DE VIGENCIA DE ESTA GARANTÍA. NO SE EFECTUARÁN
REEMBOLSOS. SI NO HAY PIEZAS DE REPUESTO
DISPONIBLES PARA LOS MATERIALES DEFECTUOSOS,
HOMEDICS SE RESERVA EL DERECHO DE REALIZAR
SUSTITUCIONES EN VEZ DE REPARAR O CAMBIAR.
Esta garantía no se extiende a la compra de productos
abiertos, usados, reparados, embalados otra vez y/o
abiertos y vueltos a cerrar, incluyendo entre otras cosas
la venta de dichos productos en sitios de remate por
Internet y/o la venta de dichos productos por revendedores
o mayoristas. Todas y cada una de las garantías cesarán
y terminarán inmediatamente con respecto a cualquier
producto o pieza del mismo que estén reparados,
cambiados, alterados o modificados sin el consentimiento
previo explícito y por escrito de HoMedics.
Esta garantía le proporciona derechos legales específicos.
Es posible que usted tenga derechos adicionales que
pueden variar de un país a otro. Debido a las regulaciones
de ciertos países, es posible que algunas de las
limitaciones y exclusiones no se apliquen en su caso.
Por más información con respecto a nuestra línea de
productos en los EE.UU., visítenos en: www.homedics.com
BPW-040_A.indd 1-2BPW-040_A.indd 1-2 12/22/09 12:37 PM12/22/09 12:37 PM

1 2
TABLE OF CONTENTS
INTRODUCTORY INFORMATION:
Important Product Notices and
Safety Instructions .....................................3
About Blood Pressure................................5
What is Blood Pressure?
Why Measure Your Blood Pressure?
Blood Pressure Standard...........................5
How This Blood Pressure
Monitor Works.............................................7
USAGE INFORMATION:
Name/Function of Each Part ......................8
Display Explanations..................................9
Installing Batteries .....................................11
Date & Time Set Procedure........................12
Applying the Cuff........................................13
Correct Measurement Posture ..................14
Measurement Procedure............................15
Risk Category Index ...................................17
Recalling Values from Memory..................18
Clearing Values from Memory...................19
Important Notes Regarding Your
Blood Pressure Measurement...................20
Care, Maintenance & Cleaning ..................21
Potential for Electromagnetic
Interference.................................................23
Troubleshooting..........................................24
Specifications .............................................25
5 Year Limited Warranty.............................26
BPW-040_A.indd 3-4BPW-040_A.indd 3-4 12/22/09 12:37 PM12/22/09 12:37 PM

3 4
IMPORTANT PRODUCT NOTICES AND
SAFETY INSTRUCTIONS
When using your blood pressure monitor,
basic precautions should always be followed.
Please read and follow all instructions and
warnings before using this product. Save these
instructions for future reference.
• Please note that this is a home healthcare
product only and it is not intended to serve as
a substitute for the advice of a physician or
medical professional.
• Do not use this device for diagnosis or
treatment of any health problem or
disease. Measurement results are for
reference only. Consult a healthcare
professional for interpretation of
pressure measurements. Contact your
physician if you have or suspect any medical
problem. Do not change your medications
without the advice of your physician or
healthcare professional.
• This product is not suitable for people with
arrhythmias. This device may have difficulty
determining the proper blood pressure for
individuals with diabetes, poor circulation of
blood, kidney problems or for users who have
suffered from a stroke.
• Consult your physician before measuring
blood pressure at the wrist if you have any of
the following conditions: Severe hypertension,
severe diabetes, severe arteriosclerosis,
severe kidney disease or vascular disease
that may compromise circulation.
• The pulse display is not suitable for checking
the frequency of heart pacemakers.
• Electromagnetic interference: The device
contains sensitive electronic components.
Avoid strong electrical or electromagnetic fields
in the direct vicinity of the device (e.g. mobile
telephones, microwave ovens). These may
lead to temporary impairment of measurement
accuracy.
• Use this blood pressure monitor only for its
intended use.
• Do not wrap the cuff around body parts other
than your wrist.
• Not for use by persons under the age of 18.
• Use only 1.5V AAA alkaline batteries for power
supply.
Blood pressure measurements determined with
this device are equivalent to those obtained by
a trained observer using the cuff/stethoscope
auscultatory method, within the limits prescribed
by the American National Standard, Manual,
electronic, or automated sphygmomanometers.
BPW-040_A.indd 5-6BPW-040_A.indd 5-6 12/22/09 12:37 PM12/22/09 12:37 PM

5 6
ABOUT BLOOD PRESSURE
What is Blood Pressure?
Blood pressure is the pressure exerted on the
artery walls while blood flows through the arteries.
The pressure measured when the heart contracts
and sends blood out of the heart is systolic
(highest) blood pressure. The pressure measured
when the heart dilates with blood flowing back into
the heart is called diastolic (lowest) blood pressure.
Why Measure Your Blood Pressure?
Among today’s various health problems, those
associated with high blood pressure are very
common. High blood pressure dangerously
correlates with cardiovascular diseases. Therefore,
blood pressure monitoring is important for
identifying those at risk.
BLOOD PRESSURE STANDARD
The table on page 6 is criteria for hypertension that
is publicly available from the National Heart Lung
and Blood Institute at the U.S. National Institutes
of Health (NIH) (http://www.nhlbi.nih.gov/health/
dci/Diseases/Hbp/HBP_WhatIs.html). Users can
compare their own blood pressure readings against
these established criteria to determine if they may
be potentially at increased risk.
This table is applicable to most adults aged 18 and
older. Blood pressure tends to go up and down,
even in people who normally don’t have high
readings. If your numbers stay above the “normal”
range most of the time, you may be at increased
risk and should consult your physician.
Although one can easily find where their own blood
pressure readings fall on this table, this monitor
comes equipped with a Risk Category Index that
automatically compares each reading to this criteria
and provides a helpful cue if your reading falls into
one of the stages that could potentially indicate
increased risk. See page 17 for more information
on this feature.
Please note that cues provided by this monitor are
only intended to assist you in using this table. The
table and cues are only provided for convenience
to have access to the NIH information. They are
not a substitute for a medical examination by your
physician. It is important for you to consult with
your physician regularly. Your physician will tell
you your normal blood pressure range as well as
the point at which you may actually be considered
to be at risk.
Category Systolic (mmHg) Diastolic (mmHg)
Normal Less than 120 and Less than 80
Prehypertension 120-139 or 80-89
High Blood Pressure
Stage 1 140-159 or 90-99
Stage 2 160 or higher or 100 or higher
BPW-040_A.indd 7-8BPW-040_A.indd 7-8 12/22/09 12:37 PM12/22/09 12:37 PM

7 8
HOW THIS BLOOD PRESSURE
MONITOR WORKS
This monitor uses innovative technology to detect
your blood pressure. This technology enables
the monitor to automatically inflate and deflate at
the appropriate level for each individual. With one
touch of a button, the cuff will automatically inflate
to block the blood flow through your artery. Next,
the deflation process starts. Please note that any
muscle movement during inflation or deflation will
cause measurement error. When measurement
is complete, the monitor will display your systolic
pressure, diastolic pressure, and pulse readings.
The monitor automatically finds where your
measurement results fall on the NIH’s National
Heart Lung and Blood Institute’s table and provides
a cue if your reading falls into one of the stages that
could potentially indicate increased risk. Please
refer to page 17 for more information on this
feature.
NAME/FUNCTION OF EACH PART
Battery
Cover
Memory
Recall Button START/STOP
Button
LCD Display
Wrist
cuff
Date/Time/
Set Buttons
Other Accessories (not included):
2 “AAA” size, 1.5V
alkaline batteries
(batteries not included)
BPW-040_A.indd 9-10BPW-040_A.indd 9-10 12/22/09 12:37 PM12/22/09 12:37 PM

9 10
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the
unit off to clear, then measure again.
Data Error: Remove and reload the
batteries.
DISPLAY EXPLANATIONS
Date/Time Indicator
Diastolic
Pressure
Display Symbols:
Heart Rate
Systolic
Pressure
AVG. 3
ERROR
If ERROR and any of the following letters and numbers
appear in the area that diastolic pressure should be
displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more
information.
Weak Battery Symbol: Appears when
batteries should be replaced.
Pulse Symbol: Shows the heart rate per
minute.
Memory Average: Displays average of last
3 readings
Risk Categoty Index: See page 17 for more
information.
AVG. 3
BPW-040_A.indd 11-12BPW-040_A.indd 11-12 12/22/09 12:37 PM12/22/09 12:37 PM

11 12
1. The battery cover is located
along the left side of the
monitor. Remove battery
cover by pressing down
and pulling away from the
monitor.
2. Install batteries according to
the polarity indications inside
the compartment (as shown
in fig. 2). Battery Type: 2
Alkaline LR03 (AAA) size
3. Replace the cover
by inserting it back
into place.
Replace the batteries if:
1. The weak battery
symbol appears in
the display.
2. Nothing appears in the
display when the power is
switched on.
Replace all batteries at one time (as simultaneous
set). Use only 1.5V AAA alkaline batteries.
Remove batteries when unit is not in use for
extended periods of time. Date and time will need
to be reset if batteries are removed or replaced.
Clean contacts on battery and in battery
compartment with a soft dry cloth each time you
install batteries.
INSTALLING BATTERIES
DATE/TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
. The display will show a blinking number
showing the month.
2. Change the month by pressing the button.
Each press will increase the number by one in a
cycling manner. Press the Set button again
to confirm the entry, and the screen will show
a blinking number representing the day of the
month.
3. Change the date and time as described in
Step 2 above, using the button to change
the numbers and the Set button to confirm
the entries.
blinking month
increasing month
confirm the entry
repeat process to set date and time
Press the button
1.
2.
3.
Note: Batteries are hazardous waste. Do not dispose of
them together with the household garbage.
BPW-040_A.indd 13-14BPW-040_A.indd 13-14 12/22/09 12:37 PM12/22/09 12:37 PM

13 14
1. Remove all watches,
wrist jewelry, etc. prior to
attaching the wrist monitor.
Clothing sleeves should
be rolled up and the cuff
should be wrapped around
bare skin for correct
measurements.
2. Apply cuff to left wrist with
palm facing up as shown in
Fig. A.
3. Make sure the edge
of the cuff is about 1/4”~1/2”
(1 cm) from the palm as
shown in Fig. B.
4. In order to insure accurate
measurements, fasten
the hook and loop strap
securely around your wrist
so there is no extra space
between the cuff and the
wrist as shown in Fig. C. If
the cuff is not wrapped tight
enough, the measurement
values will not be accurate.
5. If your physician has
diagnosed you with poor
circulation in your left arm,
place the cuff around your
right wrist as shown in Fig. D.
APPLYING THE CUFF CORRECT MEASUREMENT
POSTURE
1. Place your elbow on a table
so that the cuff is at the same
level as your heart as shown
in Fig. A.
Relax your entire body,
especially between your
elbow and fingers.
Note: Your heart is
located slightly
below your armpit.
2. If the cuff is not at the same
level as your heart or if
you cannot keep your arm
completely still throughout
the reading, use a soft object
such as a folded towel to
support your arm as shown
in Fig. B.
3. Turn your palm upwards.
4. Sit upright in a chair, and
take 5-6 deep breaths.
Avoid leaning back while the
measurement is being taken
as shown in Fig. C.
Fig. A
Fig. B
Fig. C
(X)
BPW-040_A.indd 15-16BPW-040_A.indd 15-16 12/22/09 12:37 PM12/22/09 12:37 PM

15 16
MEASUREMENT PROCEDURE
Important Notes:
• Position the monitor at the same level as your
heart during measurement to ensure accurate
readings.
• Blood pressure changes with every heartbeat
and is in constant fluctuation throughout the day.
• Blood pressure measurement can be
affected by the position of the user, his or her
physiologic condition and other factors. For
greatest accuracy, wait 1 hour after exercising,
bathing, eating, drinking beverages with
alcohol or caffeine, or smoking to measure
blood pressure.
• Before measurement, it is suggested that you
sit quietly for 15 minutes as measurements
taken during a relaxed state will have greater
accuracy. You should not be physically tired or
exhausted while taking a measurement.
• During the measurement, do not talk or move
your arm or hand muscles.
• See page 20 for additional notes regarding
your blood pressure measurement
If you are using this blood pressure
monitor for the first time, please remove the
protective film from the screen.
1. With the cuff wrapped around your wrist,
press the START/STOP button. Do not
inflate the cuff unless it is wrapped around
your wrist. All digits will light up, checking the
display functions. The checking procedure
will be completed after about 2 seconds.
2. After all symbols disappear, the display will
show a blinking “0”. The monitor is “Ready to
Measure” and will automatically inflate the
cuff to begin measurement. The cuff will then
begin deflating as measurement continues.
Note: The monitor will re-inflate automatically
if the system detects that your
body requires more pressure for
measurement.
S
T
A
R
T
/
S
T
O
P
BPW-040_A.indd 17-18BPW-040_A.indd 17-18 12/22/09 12:37 PM12/22/09 12:37 PM

17 18
reading falls into one of the stages that could
potentially indicate increased risk. No cue is
shown if the reading falls in the normal range as
defined by NIH. Please note that cues provided
by this monitor are only intended to assist you
in using this table. The table and cues are only
provided for convenience to have access to the
NIH information. They are not a substitute for
a medical examination by your physician. It is
important for you to consult with your physician
regularly. Your physician will tell you your
normal blood pressure range as well as the point
at which you may actually be considered to be
at risk.
RECALLING VALUES FROM
MEMORY
1. Press the MEMORY button to access the
memory.
3. When the measurement is completed, the
cuff will deflate entirely and systolic pressure,
diastolic pressure and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically stored
into memory.
Note:
1. This monitor automatically turns off
approximately 1 minute after last
operation. You may also press the START/
STOP button to turn the unit off.
2. To interrupt the measurement, you may press
the START/STOP button (recommended) or
the Memory, or Date/Time Set ( ) buttons.
The cuff will deflate immediately after a button
is pressed.
RISK CATEGORY INDEX
This monitor comes equipped with a Risk
Category Index that automatically compares
each reading to criteria established by the U.S.
National Institute of Health’s (NIH) National Heart
Lung and Blood Institute as described earlier in
this manual, and provides a helpful cue if your
M
e
m
o
r
y
(No Symbol)
BPW-040_A.indd 19-20BPW-040_A.indd 19-20 12/22/09 12:37 PM12/22/09 12:37 PM