HoMedics BPS-060 User manual

BPS-060
El manual en español
empieza en la página 30
Manual Inflate
Blood Pressure Monitor
®
BPS-060_B.indd 1-2BPS-060_B.indd 1-2 5/01/10 1:27 PM5/01/10 1:27 PM

1 2
TABLE OF CONTENTS
INTRODUCTORY INFORMATION:
Important Product Notices and Safety Instructions......... 3
About Blood Pressure......................................................... 5
What is Blood Pressure?
Why Measure Your Blood Pressure?
Blood Pressure Standard.................................................... 5
How This Blood Pressure Monitor Works ......................... 7
USAGE INFORMATION:
Name/Function of Each Part ............................................... 8
Display Explanations........................................................... 9
Installing Batteries ............................................................ 11
Date & Time Set Procedure............................................... 13
Using The Arm Cuff ........................................................... 14
Measurement Procedure................................................... 18
Risk Category Index .......................................................... 21
Recalling Values from Memory......................................... 22
Clearing Values from Memory .......................................... 22
Important Notes Regarding Your
Blood Pressure Measurement.......................................... 23
Care, Maintenance & Cleaning ......................................... 24
Potential for Electromagnetic Interference ..................... 26
Troubleshooting................................................................. 27
Specifications .................................................................... 28
5 Year Limited Warranty .................................................... 29
BPS-060_B.indd 3-4BPS-060_B.indd 3-4 5/01/10 1:27 PM5/01/10 1:27 PM

3 4
• The pulse display is not suitable for checking the frequency of
heart pacemakers.
• Electromagnetic interference: The device contains
sensitive electronic components. Avoid strong electrical or
electromagnetic fields in the direct vicinity of the device (e.g.
mobile telephones, microwave ovens). These may lead to
temporary impairment of measurement accuracy.
• Use blood pressure monitor only for its intended use.
• Do not wrap the cuff around body parts other than your arm.
• Not for use by or on persons under the age of 18.
• Use only 1.5V AA alkaline batteries for power supply.
Blood pressure measurements determined with this device are
equivalent to those obtained by a trained observer using the cuff/
stethoscope ausculatory method, within the limits prescribed by
the American National Standard, Manual, electronic, or automated
sphygmomanometers.
IMPORTANT PRODUCT NOTICES AND SAFETY
INSTRUCTIONS
When using your blood pressure monitor, basic precautions
should always be followed. Please read and follow all instructions
and warnings before using this product. Save these instructions
for future reference.
• Please note that this is a home healthcare product only and
it is not intended to serve as a substitute for the advice of a
physician or medical professional.
• Do not use this device for diagnosis or treatment of any health
problem or disease. Measurement results are for reference
only. Consult a healthcare professional for interpretation
of pressure measurements. Contact your physician if you
have or suspect any medical problem. Do not change your
medications without the advice of your physician or healthcare
professional.
• Proper cuff size is critical for accurate measurements. Follow
the instructions in this manual and printed on the arm cuff to
ensure the appropriate size of cuff is being used.
• This device may have difficulty determining the proper blood
pressure for individuals with diabetes, poor circulation of blood,
kidney problems or for users who have suffered from a stroke.
®
BPS-060_B.indd 5-6BPS-060_B.indd 5-6 5/01/10 1:27 PM5/01/10 1:27 PM

5 6
This table is applicable to most adults aged 18 and older.
Blood pressure tends to go up and down, even in people
who normally don’t have high readings. If your numbers
stay above the “normal” range most of the time, you may
be at increased risk and should consult your physician.
Although one can easily find where their own blood
pressure readings fall on this table, this monitor comes
equipped with a Risk Category Index that automatically
compares each reading to this criteria and provides a
helpful cue if your reading falls into one of the stages that
could potentially indicate increased risk. See page 21 for
more information on this feature.
Please note that cues provided by this monitor are only
intended to assist you in using this table. The table and
cues are only provided for convenience to have access to
the NIH information. They are not a substitute for a medical
examination by your physician. It is important for you to
consult with your physician regularly. Your physician will tell
you your normal blood pressure range as well as the point
at which you may actually be considered to be at risk.
ABOUT BLOOD PRESSURE
What is Blood Pressure?
Blood pressure is the pressure exerted on the artery
walls while blood flows through the arteries. The pressure
measured when the heart contracts and sends blood
out of the heart is systolic (highest) blood pressure. The
pressure measured when the heart dilates with blood
flowing back into the heart is called diastolic (lowest)
blood pressure.
Why Measure Your Blood Pressure?
Among today’s various health problems, those associated
with high blood pressure are very common. High blood
pressure dangerously correlates with cardiovascular
diseases. Therefore, blood pressure monitoring is
important for identifying those at risk.
BLOOD PRESSURE STANDARD
The table on page 6 is criteria for hypertension that is
publicly available from the National Heart Lung and Blood
Institute at the U.S. National Institutes of Health (NIH)
(http://www.nhlbi.nih.gov/health/dci/Diseases/Hbp/HBP_WhatIs.html). Users
can compare their own blood pressure readings against
these established criteria to determine if they may be
potentially at increased risk.
Category Systolic (mmHg) Diastolic (mmHg)
Normal Less than 120 and Less than 80
Prehypertension 120-139 or 80-89
High Blood Pressure
Stage 1 140-159 or 90-99
Stage 2 160 or higher or 100 or higher
BPS-060_B.indd 7-8BPS-060_B.indd 7-8 5/01/10 1:27 PM5/01/10 1:27 PM

7 8
NAME/FUNCTION OF EACH PART
LCD
Display
Battery Cover
(Located on bottom
of unit)
Memory Recall
Button
START/STOP Button
Cuff Tube
Arm Cuff
Inflation Bulb
Date/Time
Set Buttons
HOW THIS BLOOD PRESSURE
MONITOR WORKS
This manual inflate digital blood pressure monitor provides
systolic pressure, diastolic pressure and pulse readings
quickly and easily. Once the cuff is inflated, the monitor
will determine your blood pressures by analysis of your
pressure oscillations. When the measurement is completed,
the device will deflate the cuff and display your systolic
pressure, diastolic pressure and pulse readings.
The monitor automatically finds where your measurement
results fall on the NIH’s National Heart Lung and Blood
Institute’s table and provides a cue if your reading falls into
one of the stages that could potentially indicate increased
risk. Please refer to page 21 for more information on this
feature.
BPS-060_B.indd 9-10BPS-060_B.indd 9-10 5/01/10 1:27 PM5/01/10 1:27 PM

9 10
Inflation Symbol: Appears when cuff requires inflation.
Deflation Symbol: Appears when cuff is deflating.
Weak Battery Symbol: Appears when batteries should
be replaced.
Pulse Symbol: Shows the heart rate per minute.
Memory Average: Displays average of last 3 readings.
Risk Category Index: See page 21 for more information.
Display Symbols:
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Error Determining Measurement Data: Measure again.
If and any of the following letters and numbers appear in the
area that systolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for more
information.
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time Indicator
Heart Rate
BPS-060_B.indd 11-12BPS-060_B.indd 11-12 5/01/10 1:27 PM5/01/10 1:27 PM

11 12
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only
1.5V AA alkaline batteries. Remove batteries when unit is
not in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced. Clean
contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
Note: Batteries are hazardous waste. Do not dispose of
them together with the household garbage.
INSTALLING BATTERIES
1. Press down on latch and lift the battery cover towards
you to open the battery compartment.
2. Install or replace 4 “AA” sized batteries in the battery
compartment according to the indications inside the
compartment.
3. Replace the battery cover by clicking in the bottom
hooks first, then push in the top end of the battery
door.
Battery
Cover
BPS-060_B.indd 13-14BPS-060_B.indd 13-14 5/01/10 1:27 PM5/01/10 1:27 PM

13 14
USING THE ARM CUFF
Very Important: Proper cuff size is critical to accurate
measurement.
This monitor comes with a Standard Size arm cuff that
fits arms with circumferences of 9”–13” (23 cm – 33 cm).
This cuff is suitable for your use if the colored arrow
falls within the solid color line as shown below.
If the arrow falls outside of the solid color line, you
will need a cuff with another circumference. Contact
HoMedics Consumer Relations at 1-800-466-3342.
ARROW MUST FALL
WITHIN YELLOW BAND
ARROW MUST FALL
WITHIN YELLOW BAND
Center tube over
middle of arm
MODEL# PP-BPCUFF5
Position cuff
edge 0.6˝
–
1.0˝
(1.5
–
2.5cm)a bove el bow.
Center tube over
middle of arm.
Fit cuff securely.Allow room for
two fingersto fit between the cuff
and your arm.
Solid Colored Line
Colored Arrow
DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button .
2. The display will show a blinking number showing
the date. Change the month by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button again
to confirm the entry, and the screen will show a
blinking number representing the day of the month.
3. Change the date and time as described in Step 2
above, using the button to change the numbers
and the Set button to confirm the entries.
Press the button
blinking month
increasing month
confirm the entry
repeat process to set date and time
BPS-060_B.indd 15-16BPS-060_B.indd 15-16 5/01/10 1:27 PM5/01/10 1:27 PM

15 16
3. Open the arm cuff so that your arm may be placed
through it.
4. Remove tight fitting clothing from around
your upper left arm.
5. Position cuff edge 0.8-1.2
inches (2-3 cm) above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm.
8. Lay your arm on a table (palm upward)
so the cuff is at the same height as your
heart. Make sure the tube is not kinked.
1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side
without the felt material should be on the inside of
the cuff loop.
2. Plug the cuff tube into the left side of the unit.
Positioncuff
edge0.6˝
–
1.0˝
(1.5
–
2.5cm)above elbow
Centertubeover
middleof arm.
F
Insert plug here
ARROW MUST FALL
WITHIN YELLOW BAND
D-ring
End of cuff
Felt Material
on the outside
of cuff
BPS-060_B.indd 17-18BPS-060_B.indd 17-18 5/01/10 1:27 PM5/01/10 1:27 PM

17 18
MEASUREMENT PROCEDURE
Important Notes:
• Blood pressure changes with every heartbeat and is
in constant fluctuation throughout the day.
• Blood pressure measurement can be affected by the
position of the user, his or her physiologic condition
and other factors. For greatest accuracy, wait 1
hour after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking to
measure blood pressure.
• Before measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken
during a relaxed state will have greater accuracy.
You should not be physically tired or exhausted
while taking a measurement.
• During the measurement, do not talk or move your
arm or hand muscles.
• See page 23 for additional notes regarding your
blood pressure measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
Note:
If it is not possible to fit the cuff to your left arm, it
can also be placed on your right arm. However, all
measurements should be made using the same arm.
To use on the right arm, you must position the artery
symbol “ ” over the main artery. Locate the main artery by
pressing with two fingers approximately 1” (2 cm) above
the bend of your elbow on the inside of your right arm.
Identify where the pulse can be felt the strongest.This is
your main artery.
Main Artery
BPS-060_B.indd 19-20BPS-060_B.indd 19-20 5/01/10 1:27 PM5/01/10 1:27 PM