HoMedics HMC-600 User manual

Installation Manual
HMC-600MASSAGECHAIR

HMC-600 Assembly Instructions
STEP 1: The HMC-600 Massage chair arrives in 2 boxes.
STEP 2: Open box 1 and remove all contents. Remove the packing materials. Take the chair
out of the box. Collect all the accessories and put them aside.
STEP 3: Adjust chair position. Use the power cord to connect the chair to the power supply
and turn on the power switch. The chair will go back to home position. Then
disconnect the power cord.
STEP 4: Remove cotter pins from the chair base. Locate the two cotter pins on the chair
base. Take them off and put them aside.
Product Weight / N.W.: 217.1 LBS
Dimensions (L x W x H): 61.4″ x 31.5” x 48”
Made in China
2
Base & Backrest1
(BOX 1 OF 2)
HMC-600
TEAM LIFTING
REQUIRED
(OVER 50 LBS)
HMC-600
TEAM LIFTING
REQUIRED
(OVER 50 LBS)
5
Made in China
Footrest2
(BOX 2 OF 2)

STEP 6: Connect wire connector and air hose connector.
STEP 7: Fully connect the footrest to the base. Hang the footrest on bolts of the base and
lock with the two cotter pins you set aside.
STEP 5: Open box 2. Take the footrest out of the box and move it close to the chair.

Attach the footrest fabric and seat pad. Connect the chair to a power supply and
turn on the power switch. Now your massage chair is ready to go!
STEP 8: