Honeywell MN Series User manual

Local Air Conditioner
User Manual
Read and save these instructions before use
EN
Stacjonarny Klimatyzator
Instrukcja obsługi
Przeczytaj i zachowaj tę instrukcję przed użyciem
PL
Lokale Airconditioner
Gebruiksaanwijzing
Lees de gebruiksaanwijzing zorgvuldig en
bewaar deze goed
NL
Condizionatore d'aria Locale
Manuale Utente
Leggere attentamente le istruzioni prima
dell'utilizzo dell'apparecchio
IT
Ar Condicionado Local
Manual do Utilizador
Leia e guarde estas instruções antes da
utilização
PT
Lokal Luftkonditionering
Luftkylare Användarmanual
Läs och spara dessa instruktioner innan användning
SE
Lokalt Klimaanlæg
Brugervejledning
Læs og gemme disse instrukser inden brug
DK
Lokal Kliİm
Kılavuzu
Kullanmadan önce bu talimatları okuyun ve
saklayın
TR
Lokale Klimaanlage
Benutzerhandbuch
Lesen Sie die Anleitung vor dem Gebrauch
und heben Sie sie auf
DE
Aire Acondicionado Local
Manual de Instrucciones
Lea y guarde estas instrucciones antes
de usar la unidad
ES
Локальный Кондиционер Воздуха
Руководство пользователя
Прочтите и сохраните эту инструкцию перед
использованием
RU
Ilmastointilaite
Käyttäjän Opas
Lue ohjeet ennen käyttöä ja säästä ne
FI
Model / Modèle / Modelo / Modello /
Mallien / Modeller / Modell / Мoдэль :
MN Series
Climatiseur Local
Mode d'emploi
Lire ces instructions avant l'utilisation et
les conserver
FR
www.honeywellaircomfort.com
[e-mail]

EN
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DO NOT operate the unit with a damaged plug or loose wall
outlet. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
DO NOT cover the air intake and exhaust when in use.
DO NOT place objects on or sit on the unit.
Always turn off and unplug the unit when cleaning or
servicing.
DO NOT use the appliance if it is damaged.
If service is needed contact an authorized service agent.
Unplug the unit when stored or not in use.
DO NOT pull or carry the appliance by the power cord.
DO NOT pinch the power cord in the door and DO NOT pull
it along edges or sharp corners.
DO NOT run the power cord under carpeting and rugs.
Use caution to prevent tripping on cord.
DO NOT use the device in the following cases:
- Near a fire source
- In areas where gasoline, paint or other flammable
goods are stored
- In an area where the water can be projected
DO NOT touch the plug or the device with wet hands.
Basic safety precautions should always be followed when
using electrical appliances.
This appliance has been manufactured for use in domestic
environments and should not be used for other purposes.
SAFETY
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE. IN CASE THERE IS ANY
INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH
VERSION AND ANY OTHER LANGUAGE VERSION OF THE
CONTENT OF THIS MATERIAL, THE ENGLISH VERSION
SHALL PREVAIL.
WARNING:

EN
SAFETY (CONTINUED)
Only use the installation kit provided to install this unit.
DO NOT attempt to extend the exhaust hose or install
this unit using other methods other than that shown in
this manual. Improper installation will void any existing
warranties.
DO NOT use an extension cord with this unit.
This appliance can be used by children aged from 8 years
and above, and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Never insert your fingers or rods into the air outlet. Take
special care to warn children of these dangers.
The manufacturer is not liable for injury caused to
persons or property damage due to non-compliance
with maintenance instructions and improper use of the
appliance.
The appliance shall be installed in accordance with national
wiring regulations.
The appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
Children should be supervised to ensure that they do not
play with the appliance.
•
•
•
•
•
•
•
•
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.

EN
SYMBOL NOTE EXPLANATION
WARNING
This symbol shows that this
appliance uses a flammable
refrigerant. If the refrigerant
is leaked and exposed to
an external ignition source,
there is a risk of fire.
CAUTION
This symbol shows that the
operation manual should be
read carefully.
CAUTION
This symbol shows that a
service personnel should be
handling this equipment with
reference to the installation
manual.
CAUTION
This symbol shows that
information is available such
as the operating manual or
installation manual.
R290 SAFETY

EN
R290 SAFETY (CONTINUED)
Additional warnings for appliances with R290 refrigerant gas.
Read the instruction carefully before using the appliance.
R290 refrigerant gas complies with European environmental
directives.
This appliance contains a certain number of grams (see rating
label at the back of the unit) of R290 refrigerant gas. The
maximum refrigerant charge amount is 0.3 kg.
When defrosting or cleaning, do not use any method other than
those recommended by the manufacturer.
Do not place the appliance in a room with continuous sources
of ignition (e.g. open flame, operating gas appliance or working
electrical heater).
Do not pierce and do not burn.
Do not perforate any part of the refrigerant circuit.
Refrigerant gas may be odorless.
The appliance must be installed, used and stored in an area that
is greater than 15 m2.
Accumulation of possible refrigerant leaks in an unventilated
room could lead to fire or explosion should the refrigerant
come in contact with electric heaters, stoves or other sources of
ignition.
The appliance must be stored in a way to prevent mechanical
damage.
Only individuals authorized by an accredited organization
certifying their competence to handle refrigerants in compliance
with industry legislation should work on the refrigerant circuit.
•
•
•
•
•
•
•
•
•
•
•
•
Repair must be performed based on the recommendations from
the manufacturer. Maintenance and repair that requires the
assistance of other qualified personnel must be performed under
the supervision of specialists in the use of flammable refrigerants.

1
THANK YOU
USER TIPS
Congratulations on your purchase of this Honeywell Local Air Conditioner.
Regarding the information pertaining to the installation, handling, servicing, cleaning and disposal
of the appliance, please refer to the below paragraph of the manual.
Local Air Conditioners are ideal for spot cooling. The compressor, condenser and evaporator are
housed in a compact unit. The air is dehumidified and cooled while a flexible exhaust hose sends
heat outside. The air conditioner includes a window venting kit.
No permanent installation is needed. The unit is easy to move from room to room and offers a truly
flexible air conditioning solution.
Auto Evaporation System - The unit automatically evaporates the condensate through the exhaust
hose. There is no need to empty the drainage tank except in very humid conditions. Read and follow
the instructions carefully.
To ensure optimal efficiency of the product, keep doors and windows closed when it is used as an air
conditioner or dehumidifier. If the product is being used with the fan function only, an open window
could improve air circulation.
EN
Important:
Before installing the unit, place it UPRIGHT for 1 hour before use to allow the refrigerant to stabilize.
Manually adjust the air vent located at the top of the unit to adjust the direction of air flow.
Follow installation instructions to set up the unit.
Plug the unit into a properly grounded circuit. DO NOT plug into an extension cord.
•
•
Cooling, Heating* and
Dehumidifying Operation Fan Operation
*Applicable for models with Heating feature only.

2
PARTS DESCRIPTION
EN
6
13
12
11
8
910
1
3
2
4
5
7
1) Control Panel
(Incl. Signal Receptor)
9) Remote Control
2) Air Outlet 10) Lower Drain Plug with Plastic Cap
(Air Conditioning Mode)
3) Handle 11) Upper Drain Plug
(Dehumidifier Mode)
4) Casters 12) Lower Dust Filter
5) Upper Dust Filter 13) Lower Grill
6) Upper Grill
7) Exhaust Hose Connector
8) Power Supply Cord

3EN
INSTALLATION
It is important that the installation instructions below are followed for successful installation of this
Local Air Conditioner. Please call Customer Support if you have any difficulties or queries
regarding these installation procedures.
Installation Kit:
Installation Steps:
Slide-in the exhaust nozzle to the pre-assembled hose, rotate the exhaust nozzle anti-clockwise,
until it is locked in place. (See Fig. 1).
2.
5
1
x1
x1
x1
2
Through an Open Window
Fig.1
=
Exhaust nozzle adapter, exhaust hose and exhaust hose connector are pre-assembled inside the
package.
1.
1. Flange Fixture + Hole Cover (1 Piece) 4. Exhaust Hose (1 Piece)
2. Exhaust Nozzle Adapter (1 Piece) 5. Exhaust Nozzle (1 Piece)
3. Exhaust Hose Connector (1 Piece)
4
x1
x1
3

4
INSTALLATION (CONTINUED)
2. Connect the exhaust hose to the rear exhaust outlet on the back of the unit. Slide-in the exhaust
hose connector downwards until it is locked in place.
3. Extend the exhaust hose through an open window and close the window as far as possible
trapping the Exhaust Nozzle (as shown below).
EN
Exhaust Hose:
Dia. 5.9" (15 cm)
Length: 12" to 47" (30 cm to 120 cm)

5EN
INSTALLATION (CONTINUED)
Through a Drilled Hole in the Wall or Window
If required, your Local Air Conditioner can be installed semi-permanently.
Note: When the unit is not in use, remove the Exhaust Hose from the Flange Fixture on the wall and
use the included Hole Cover to cover the hole on the wall.
Drill a hole through an outside wall or through a window pane. Respect the height and dimensions
of the hole given in Fig. 1 and Fig. 2.
Insert and secure the Flange Fixture + Hole Cover into the newly drilled hole.
Fix one end of the Exhaust Hose into the Flange Fixture + Hole Cover that was secured
on the wall.
Fix the other end of the Exhaust Hose onto the Exhaust Hose Connector and then onto the rear
Exhaust outlet of the unit (See Fig. 2).
1.
2.
3.
4.
MAX. 14" (36 cm)
MAX. 40" (102 cm)
20" (50 cm)
11.8" (30 cm)
5.9" (15 cm)
Fig.2Fig.1
In the
window
panel
In the wooden
kickboard
of a french
window
In the wall: we
recommend you to
insulate the section
of wall using suitable
insulation materials.