Honeywell N4680 User manual

User Guide
N4680
2D Decoded Scan Engine

Disclaimer
Honeywell International Inc. and its affiliates, subsidiaries, and other entities forming part of Honeywell group (“HII”)
reserves the right to make changes in specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The infor-
mation in this publication does not represent a commitment on the part of HII.
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the
applicable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in
writing; please refer to your order acknowledgment or consult your local sales office for specific warranty details. If war-
ranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, with-
out charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s sole remedy and is
in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular pur-
pose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While Honeywell may pro-
vide application assistance personally, through our literature and the Honeywell web site, it is buyer’s sole responsibility to
determine the suitability of the product in the application. Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this doc-
ument may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Copyright 2020 Honeywell International Inc. All rights reserved.
Web Address: www.sensing.honeywell.com
Other product names or marks mentioned in this document may be trademarks or registered trademarks of other compa-
nies and are the property of their respective owners.
For patent information, refer to www.hsmpats.com.

N4680 2D Decoded Scan Engine User Guide i
TABLE OF CONTENTS
Customer Support and Technical Assistance.................................................................xvii
Product Service and Repair .............................................................................................xvii
Limited Warranty .................................................................................................................xvii
Chapter 1 - Get Started ....................................................................................1
Introduction...................................................................................................................................... 1
About This Manual......................................................................................................................... 1
Unpack Your Device....................................................................................................................... 1
Connect the N4680 Scan Engine to a PC ............................................................................ 2
Connect with USB.................................................................................................................... 2
Connect with RS232 Serial Port ........................................................................................ 3
Reading Techniques...................................................................................................................... 4
Menu Bar Code Security Settings............................................................................................ 5
Set Custom Defaults ..................................................................................................................... 5
Reset the Custom Defaults......................................................................................................... 5
Chapter 2 - Programming the Interface.......................................................7
Introduction...................................................................................................................................... 7
Programming the Interface........................................................................................................ 7
RS232 Serial Port..................................................................................................................... 7
RS485 Packet Mode ...............................................................................................................8
RS485 Packet Length...................................................................................................... 8
USB IBM SurePos .................................................................................................................... 8
USB PC or Macintosh Keyboard ........................................................................................ 9
USB HID....................................................................................................................................... 9
USB Serial ................................................................................................................................... 9

ii N4680 2D Decoded Scan Engine User Guide
CTS/RTS Emulation.......................................................................................................10
ACK/NAK Mode ...............................................................................................................10
Remote MasterMind™ for USB ........................................................................................10
Keyboard Country Layout.........................................................................................................10
Keyboard Style ..............................................................................................................................18
Keyboard Conversion .................................................................................................................19
Control Character Output.........................................................................................................20
Keyboard Modifiers.....................................................................................................................20
RS232 Modifiers ..........................................................................................................................22
RS232 Baud Rate ..................................................................................................................22
RS232 Word Length: Data Bits, Stop Bits, and Parity ............................................23
RS232 Receiver Time-Out .................................................................................................24
RS232 Handshaking............................................................................................................24
RS232 Timeout.......................................................................................................................25
XON/XOFF...............................................................................................................................25
ACK/NAK ..................................................................................................................................25
RS232 Stop Mode .................................................................................................................26
Chapter 3 - Input/Output Settings............................................................. 27
Power Up Beeper..........................................................................................................................27
Beep on BEL Character .............................................................................................................27
Trigger Click ...................................................................................................................................28
Good Read and Error Indicators ............................................................................................28
Beeper – Good Read.............................................................................................................28
Beeper Volume – Good Read ............................................................................................28
Beeper Pitch – Good Read .................................................................................................29
Beeper Pitch – Error .............................................................................................................29
Beeper Duration – Good Read..........................................................................................30
LED – Good Read ..................................................................................................................30
Number of Beeps – Good Read........................................................................................30
Number of Beeps – Error....................................................................................................30
Good Read Delay ...................................................................................................................31
User-Specified Good Read Delay....................................................................................31
Trigger Modes ...............................................................................................................................32
Manual Trigger Mode ..........................................................................................................32

N4680 2D Decoded Scan Engine User Guide iii
LED Illumination - Manual Trigger ..........................................................................32
Trigger Toggle .........................................................................................................................33
Trigger Number................................................................................................................33
Trigger Toggle Timeout.................................................................................................34
Trigger Toggle Indicator ...............................................................................................34
Serial Trigger Mode...............................................................................................................34
Read Time-Out .................................................................................................................34
Snap & Ship Trigger Mode .................................................................................................35
Presentation Modes....................................................................................................................35
Presentation Mode................................................................................................................35
Streaming Presentation™ Mode ......................................................................................35
LED Illumination - Presentation Mode.........................................................................36
Idle Illumination - Presentation Mode..........................................................................37
Presentation LED Behavior after Decode....................................................................37
Presentation Sensitivity ......................................................................................................38
Presentation Centering.......................................................................................................38
CodeGate®.......................................................................................................................................40
Mobile Phone Read Mode ........................................................................................................40
Character Activation Mode.......................................................................................................41
Activation Character.............................................................................................................41
End Character Activation After Good Read .................................................................42
Character Activation Timeout...........................................................................................42
Character Deactivation Mode .................................................................................................43
Deactivation Character .......................................................................................................43
Poor Quality Codes......................................................................................................................43
Poor Quality 1D Codes ........................................................................................................43
Poor Quality PDF Bar Codes .............................................................................................44
Decode Security............................................................................................................................44
Decode Time-Out .........................................................................................................................45
Hands Free Time-Out .................................................................................................................45
Reread Delay ..................................................................................................................................45
User-Specified Reread Delay...................................................................................................46
2D Reread Delay...........................................................................................................................46

iv N4680 2D Decoded Scan Engine User Guide
Illumination Lights......................................................................................................................48
Aimer Delay ....................................................................................................................................48
User-Specified Aimer Delay ..............................................................................................49
Aimer Mode ....................................................................................................................................49
Centering ........................................................................................................................................49
Preferred Symbology..................................................................................................................51
High Priority Symbology ....................................................................................................51
Low Priority Symbology ......................................................................................................52
Preferred Symbology Time-out........................................................................................52
Preferred Symbology Default ...........................................................................................52
Output Sequence Overview .....................................................................................................52
Output Sequence Editor.....................................................................................................52
To Add an Output Sequence .............................................................................................53
Other Programming Selections.......................................................................................53
Output Sequence Example................................................................................................54
Output Sequence Editor.....................................................................................................55
Partial Sequence ...................................................................................................................55
Require Output Sequence .................................................................................................56
Multiple Symbols .........................................................................................................................56
No Read ...........................................................................................................................................57
Video Reverse ................................................................................................................................57
Working Orientation ...................................................................................................................58
Chapter 4 - Data Editing ............................................................................... 59
Prefix/Suffix Overview ...............................................................................................................59
Points to Keep In Mind........................................................................................................59
To Add a Prefix or Suffix:.....................................................................................................60
Example: Add a Tab Suffix to All Symbologies...........................................................60
To Clear One or All Prefixes or Suffixes.........................................................................61
To Add a Carriage Return Suffix to All Symbologies................................................61
Prefix Selections...........................................................................................................................61
Suffix Selections...........................................................................................................................62
Function Code Transmit............................................................................................................62

N4680 2D Decoded Scan Engine User Guide v
Intercharacter, Interfunction, and Intermessage Delays .............................................62
Intercharacter Delay.............................................................................................................63
User Specified Intercharacter Delay ..............................................................................63
Interfunction Delay...............................................................................................................64
Intermessage Delay..............................................................................................................64
Chapter 5 - Data Formatting.........................................................................65
Data Format Editor Introduction ...........................................................................................65
Add a Data Format.......................................................................................................................66
Other Programming Selections .......................................................................................67
Data Format Editor Commands .............................................................................................68
Send Commands ...................................................................................................................68
F1—Send All Characters ...............................................................................................68
F2—Send a number of characters ............................................................................68
F3—Send all characters up to a particular character .......................................69
B9—Send all characters up to a string....................................................................70
E9—Send all but the last characters .......................................................................70
F4—Insert a character multiple times.....................................................................71
BA—Insert a string ..........................................................................................................71
B3—Insert symbology name.......................................................................................72
B4—Insert bar code length..........................................................................................72
B5—Insert key strokes ...................................................................................................73
Move Commands...................................................................................................................73
F5—Move the cursor forward a number of characters.....................................73
F6—Move the cursor backward a number of characters.................................74
F7—Move the cursor to the beginning ...................................................................74
EA—Move the cursor to the end ................................................................................74
Search Commands................................................................................................................75

vi N4680 2D Decoded Scan Engine User Guide
F8—Search forward for a character.........................................................................75
F9—Search backward for a character.....................................................................75
B0—Search forward for a string ................................................................................75
B1—Search backward for a string ............................................................................76
E6—Search forward for a non-matching character..........................................76
E7—Search backward for a non-matching character......................................77
Miscellaneous Commands................................................................................................77
FB—Suppress characters.............................................................................................77
FC—Stop suppressing characters............................................................................78
E4—Replace characters ...............................................................................................78
E5—Stop replacing characters..................................................................................78
FE—Compare characters .............................................................................................79
B2—Compare string.......................................................................................................79
EC—Check for a number ..............................................................................................79
ED—Check for non-numeric character ..................................................................79
EF—Insert a delay ...........................................................................................................80
B8—Discard Data............................................................................................................80
Data Formatter..............................................................................................................................81
Data Format Non-Match Error Tone .............................................................................82
Primary/Alternate Data Formats ...........................................................................................82
Single Scan Data Format Change ..................................................................................83
Chapter 6 - Symbologies............................................................................... 85
All Symbologies ............................................................................................................................86
Message Length Description..................................................................................................86
Codabar ...........................................................................................................................................87
Codabar On/Off.....................................................................................................................87
Codabar Start/Stop Characters......................................................................................87
Codabar Check Character..................................................................................................87
Codabar Concatenation .....................................................................................................88
Codabar Message Length .................................................................................................89
Code 39............................................................................................................................................89
Code 39 On/Off .....................................................................................................................89
Code 39 Start/Stop Characters ......................................................................................89

N4680 2D Decoded Scan Engine User Guide vii
Code 39 Check Character ..................................................................................................90
Code 39 Message Length ..................................................................................................90
Code 39 Redundancy...........................................................................................................91
Code 39 Append.....................................................................................................................91
Code 32 Pharmaceutical (PARAF) ..................................................................................91
Full ASCII...................................................................................................................................92
Code 39 Code Page...............................................................................................................92
Code 39 Unconventional Inter-Character Gaps .......................................................93
Trioptic Code ..................................................................................................................................93
Trioptic Redundancy ............................................................................................................93
Interleaved 2 of 5..........................................................................................................................94
Interleaved 2 of 5 On/Off ...................................................................................................94
Check Digit...............................................................................................................................94
Interleaved 2 of 5 Message Length................................................................................95
FEBRABAN Decode .....................................................................................................................95
NEC 2 of 5 .......................................................................................................................................95
NEC 2 of 5 On/Off.................................................................................................................96
Check Digit...............................................................................................................................96
NEC 2 of 5 Message Length .............................................................................................96
NEC 2 of 5 Redundancy......................................................................................................97
Code 93 ............................................................................................................................................97
Code 93 On/Off......................................................................................................................97
Code 93 Message Length ..................................................................................................98
Code 93 Redundancy...........................................................................................................98
Code 93 Append.....................................................................................................................98
Code 93 Code Page...............................................................................................................99
Straight 2 of 5 Industrial (three-bar start/stop) ..............................................................99
Straight 2 of 5 Industrial On/Off.....................................................................................99
Straight 2 of 5 Industrial Message Length .................................................................99
Straight 2 of 5 Industrial Redundancy.......................................................................100
Straight 2 of 5 IATA (two-bar start/stop) .........................................................................100
Straight 2 of 5 IATA On/Off.............................................................................................100
Straight 2 of 5 IATA Message Length .........................................................................100
Straight 2 of 5 IATA Redundancy..................................................................................101

viii N4680 2D Decoded Scan Engine User Guide
Matrix 2 of 5................................................................................................................................ 101
Matrix 2 of 5 On/Off.......................................................................................................... 101
Matrix 2 of 5 Message Length ...................................................................................... 102
Matrix 2 of 5 Redundancy............................................................................................... 102
Code 11......................................................................................................................................... 102
Code 11 On/Off .................................................................................................................. 102
Check Digits Required...................................................................................................... 103
Code 11 Message Length............................................................................................... 103
Code 11 Redundancy ....................................................................................................... 103
Code 128...................................................................................................................................... 104
Code 128 On/Off................................................................................................................ 104
ISBT 128 Concatenation ................................................................................................. 104
Code 128 Message Length ............................................................................................ 105
Code 128 Append............................................................................................................... 105
Code 128 Code Page ........................................................................................................ 105
Code 128 Redundancy..................................................................................................... 106
GS1-128 ....................................................................................................................................... 106
GS1-128 On/Off................................................................................................................. 106
GS1-128 Message Length ............................................................................................. 106
GS1-128 Redundancy...................................................................................................... 107
Telepen.......................................................................................................................................... 107
Telepen On/Off ................................................................................................................... 107
Telepen Output.................................................................................................................... 107
Telepen Message Length ................................................................................................ 108
Telepen Redundancy ........................................................................................................ 108
UPC-A............................................................................................................................................ 108
UPC-A On/Off...................................................................................................................... 109
UPC-A Check Digit............................................................................................................. 109
UPC-A Number System ................................................................................................... 109
UPC-A Redundancy........................................................................................................... 109
UPC-A Addenda .................................................................................................................. 110
UPC-A Addenda Required............................................................................................... 110
Addenda Timeout............................................................................................................... 111
UPC-A Addenda Separator............................................................................................. 111

N4680 2D Decoded Scan Engine User Guide ix
UPC-A/EAN-13 with Extended Coupon Code ..............................................................111
Coupon GS1 DataBar Output...............................................................................................112
UPC-E0 .........................................................................................................................................112
UPC-E0 On/Off ...................................................................................................................112
UPC-E0 Expand ..................................................................................................................113
UPC-E0 Redundancy ........................................................................................................113
UPC-E0 Addenda Required............................................................................................113
UPC-E0 Addenda Separator ..........................................................................................114
UPC-E0 Check Digit ..........................................................................................................114
UPC-E0 Leading Zero.......................................................................................................114
UPC-E0 Addenda................................................................................................................115
UPC-E1 .........................................................................................................................................115
EAN/JAN-13................................................................................................................................115
EAN/JAN-13 On/Off .........................................................................................................116
Convert UPC-A to EAN-13..............................................................................................116
EAN/JAN-13 Check Digit ................................................................................................116
EAN/JAN-13 Redundancy ..............................................................................................116
EAN/JAN-13 Addenda......................................................................................................117
EAN/JAN-13 Addenda Required ..................................................................................117
EAN-13 Beginning with 290 Addenda Required...................................................117
EAN-13 Beginning with 378/379 Addenda Required.........................................118
EAN-13 Beginning with 414/419 Addenda Required.........................................119
EAN-13 Beginning with 434/439 Addenda Required.........................................119
EAN-13 Beginning with 977 Addenda Required...................................................120
EAN-13 Beginning with 978 Addenda Required...................................................121
EAN-13 Beginning with 979 Addenda Required...................................................121
EAN/JAN-13 Addenda Separator.................................................................................122
ISBN Translate .....................................................................................................................122
EAN/JAN-8 ..................................................................................................................................122
EAN/JAN-8 On/Off ............................................................................................................123
EAN/JAN-8 Check Digit ...................................................................................................123
EAN/JAN-8 Redundancy .................................................................................................123
EAN/JAN-8 Addenda.........................................................................................................124
EAN/JAN-8 Addenda Required.....................................................................................124

x N4680 2D Decoded Scan Engine User Guide
EAN/JAN-8 Addenda Separator................................................................................... 124
MSI.................................................................................................................................................. 125
MSI On/Off ........................................................................................................................... 125
MSI Check Character........................................................................................................ 125
MSI Message Length........................................................................................................ 126
MSI Redundancy ................................................................................................................ 126
GS1 DataBar Omnidirectional............................................................................................. 127
GS1 DataBar Omnidirectional On/Off ...................................................................... 127
GS1 DataBar Omnidirectional Redundancy ........................................................... 127
GS1 DataBar Limited .............................................................................................................. 127
GS1 DataBar Limited On/Off........................................................................................ 128
GS1 DataBar Limited Redundancy............................................................................. 128
GS1 DataBar Expanded ......................................................................................................... 128
GS1 DataBar Expanded On/Off ................................................................................... 128
GS1 DataBar Expanded Message Length................................................................ 129
GS1 DataBar Expanded Redundancy ........................................................................ 129
Codablock A ................................................................................................................................ 130
Codablock A On/Off.......................................................................................................... 130
Codablock A Message Length....................................................................................... 130
Codablock F ................................................................................................................................ 130
Codablock F On/Off.......................................................................................................... 131
Codablock F Message Length....................................................................................... 131
Label Code................................................................................................................................... 131
PDF417......................................................................................................................................... 132
PDF417 On/Off .................................................................................................................. 132
PDF417 Message Length............................................................................................... 132
PDF417 Code Page ........................................................................................................... 132
MacroPDF417............................................................................................................................ 133
MicroPDF417............................................................................................................................. 133
MicroPDF417 On/Off....................................................................................................... 133
MicroPDF417 Message Length ................................................................................... 133
MicroPDF417 Code Page ............................................................................................... 134
GS1 Composite Codes ............................................................................................................ 134

N4680 2D Decoded Scan Engine User Guide xi
UPC/EAN Version...............................................................................................................135
GS1 Composite Code Message Length.....................................................................135
GS1 Composite Code Code Page .................................................................................135
GS1 Emulation ...........................................................................................................................136
TCIF Linked Code 39 (TLC39)..............................................................................................137
QR Code ........................................................................................................................................137
QR Code On/Off..................................................................................................................137
QR Code Message Length ..............................................................................................137
QR Code Append.................................................................................................................138
QR Code Page ......................................................................................................................138
QR Code No Quiet Zone ...................................................................................................138
DotCode ........................................................................................................................................139
DotCode On/Off..................................................................................................................139
Poor Quality DotCodes .....................................................................................................139
DotCode Message Length ..............................................................................................140
Digimarc Barcode™ ..................................................................................................................140
Digimarc Decoder Attempts...........................................................................................140
Digimarc Barcode...............................................................................................................140
Data Matrix ..................................................................................................................................141
Data Matrix On/Off............................................................................................................141
Low Contrast Data Matrix Enhancements...............................................................142
Data Matrix Message Length ........................................................................................142
Data Matrix Append...........................................................................................................142
Data Matrix Code Page.....................................................................................................143
Grid Matrix ...................................................................................................................................143
Grid Matrix On/Off.............................................................................................................143
Grid Matrix Message Length .........................................................................................144
MaxiCode......................................................................................................................................144
MaxiCode On/Off ...............................................................................................................144
MaxiCode Message Format............................................................................................144
MaxiCode Message Length............................................................................................145
Aztec Code ...................................................................................................................................145
Aztec Code On/Off .............................................................................................................145
Aztec Code Message Length..........................................................................................146

xii N4680 2D Decoded Scan Engine User Guide
Aztec Append ....................................................................................................................... 146
Aztec Code Page ................................................................................................................. 146
Chinese Sensible (Han Xin) Code ...................................................................................... 147
Han Xin Code On/Off ....................................................................................................... 147
Han Xin Code Message Length.................................................................................... 147
Postal Codes - 2D ..................................................................................................................... 147
Single 2D Postal Codes:................................................................................................... 148
Combination 2D Postal Codes:..................................................................................... 149
Planet Code Check Digit.................................................................................................. 151
Postnet Check Digit........................................................................................................... 151
Australian Post Interpretation....................................................................................... 151
Postal Codes - Linear.............................................................................................................. 152
China Post (Hong Kong 2 of 5) ..................................................................................... 152
China Post (Hong Kong 2 of 5) On/Off............................................................... 152
China Post (Hong Kong 2 of 5) Message Length ........................................... 153
China Post Redundancy............................................................................................ 153
Korea Post ............................................................................................................................. 153
Korea Post On/Off....................................................................................................... 153
Korea Post Message Length ................................................................................... 154
Korea Post Check Digit .............................................................................................. 154
Chapter 7 - Imaging Commands ...............................................................155
Single-Use Basis....................................................................................................................... 155
Command Syntax ..................................................................................................................... 155
Image Snap - IMGSNP............................................................................................................ 156
IMGSNP Modifiers............................................................................................................. 156

N4680 2D Decoded Scan Engine User Guide xiii
P - Imaging Style..........................................................................................................156
B - Beeper........................................................................................................................156
T - Wait for Trigger .......................................................................................................157
L - LED State..................................................................................................................157
E - Exposure ...................................................................................................................157
G - Gain ............................................................................................................................158
W - Target White Value...............................................................................................158
D - Delta for Acceptance ...........................................................................................158
U - Update Tries ............................................................................................................159
% - Target Set Point Percentage............................................................................159
Image Ship - IMGSHP .............................................................................................................159
IMGSHP Modifiers .............................................................................................................160
A - Infinity Filter ............................................................................................................160
C - Compensation........................................................................................................160
D - Pixel Depth ..............................................................................................................160
E - Edge Sharpen .........................................................................................................161
F - File Format ...............................................................................................................161
H - Histogram Stretch................................................................................................162
I - Invert Image..............................................................................................................162
IF- Noise Reduction ....................................................................................................163
IR - Image Rotate..........................................................................................................163
J - JPEG Image Quality..............................................................................................164
K - Gamma Correction ...............................................................................................164
L, R, T, B, M - Image Cropping .................................................................................165
P - Protocol.....................................................................................................................165
S - Pixel Ship ..................................................................................................................166
U - Document Image Filter.......................................................................................166
V - Blur Image................................................................................................................167
W - Histogram Ship .....................................................................................................167
Image Size Compatibility.................................................................................................168
Intelligent Signature Capture - IMGBOX.........................................................................168
Signature Capture Optimize ..........................................................................................169
IMGBOX Modifiers .............................................................................................................170
RF Default Imaging Device ...................................................................................................173

xiv N4680 2D Decoded Scan Engine User Guide
Chapter 8 - Utilities......................................................................................175
To Add a Test Code I.D. Prefix to All Symbologies ........................................................ 175
Show Decoder Revision.......................................................................................................... 175
Show Scan Driver Revision.................................................................................................... 175
Show Software Revision......................................................................................................... 176
Show Data Format.................................................................................................................... 176
Test Menu .................................................................................................................................... 176
TotalFreedom.............................................................................................................................. 176
Application Plug-Ins (Apps) ................................................................................................. 177
EZConfig-Scanning Introduction....................................................................................... 177
EZConfig-Scanning Operations................................................................................... 178
Scan Data........................................................................................................................ 178
Configure ........................................................................................................................ 178
Imaging............................................................................................................................ 178
Installing EZConfig-Scanning from the Web.......................................................... 178
Resetting the Factory Defaults............................................................................................ 179
Chapter 9 - Serial Programming Commands..........................................181
Conventions................................................................................................................................ 181
Menu Command Syntax ........................................................................................................ 181
Serial Command Example .............................................................................................. 182
Query Commands..................................................................................................................... 182
:Name: Field Usage (Optional) ............................................................................... 182
Tag Field Usage ............................................................................................................ 183
SubTag Field Usage .................................................................................................... 183
Data Field Usage.......................................................................................................... 183
Concatenation of Multiple Commands .............................................................. 183
Responses ...................................................................................................................... 183
Trigger Commands................................................................................................................... 185
Setting the Custom Defaults................................................................................................ 185
Resetting the Custom Defaults........................................................................................... 185
Menu Commands ..................................................................................................................... 186

N4680 2D Decoded Scan Engine User Guide xv
Chapter 10 - Maintenance and Troubleshooting..................................211
Repairs...........................................................................................................................................211
Inspecting Cords and Connectors...............................................................................211
Troubleshooting.........................................................................................................................211
Appendix A - Reference Charts..................................................................213
Symbology Charts.....................................................................................................................213
Linear Symbologies...........................................................................................................213
2D Symbologies ..................................................................................................................215
Postal Symbologies ...........................................................................................................215
ASCII Conversion Chart (Code Page 1252) ....................................................................216
Lower ASCII Reference Table................................................................................................217
ISO 2022/ISO 646 Character Replacements ................................................................222
Keyboard Key References.......................................................................................................224
Sample Symbols........................................................................................................................225
Programming Chart .................................................................................................................227
Programming Chart .................................................................................................................229

xvi N4680 2D Decoded Scan Engine User Guide

N4680 2D Decoded Scan Engine User Guide xvii
Customer Support and Technical Assistance
For customer support, contact your local Honeywell Sales Representative or fill out
the support form at sensing.honeywell.com/contact-support-form.
For our latest contact information, see sensing.honeywell.com/contact.
Product Service and Repair
Honeywell International Inc. provides service for all of its products through service
centers throughout the world. To obtain warranty or non-warranty service, return
your product to Honeywell (postage paid) with a copy of the dated purchase
record. To learn more, go to www.honeywellaidc.com and select Service & Repair at
the bottom of the page.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources >
Product Warranty.

xviii N4680 2D Decoded Scan Engine User Guide