Honeywell HT-900 Series TURBO FORCE User manual

OWNER'S MANUAL
G
R
A
D
E
C
O
M
M
E
R
C
I
A
L
COMMERCIALGRADE
OFFLOW
HIGHMED
COMMERCIAL GRADE
HIGH VELOCITY FAN
Model HV-140-/HV-180
G
R
A
D
E
C
O
M
M
E
R
C
I
A
L
COMMERCIALGRADE
OFFLO
W
HIGHMED

READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS BEFORE
USING THIS FAN.
When using electrical
appliances, basic safety
precautions should
always be followed,
including the following:
• Use this fan only as
described in this manual.
Other use not recom-
mended may cause fire,
electric shock or injury.
•This product is intend-
ed for household, indus-
trial and commercial use
ONLY. It is not intended
for outside use.
•High Velocity fans are
designed to create rapid
air movement; therefore,
make sure the fan is not
placed near drapes, cur-
tains, or any objects that
may be drawn into the
fan inlet.
•This fan requires a
grounded 120 Volt power
source (3 prong recepta-
cles). NEVER connect the
fan to any power source
other than a 120 volt
alternating current polar-
ized outlet.
•To protect against elec-
trical shock, do not place
fan in window, immerse
unit, plug or cord in
water or spray with liq-
uids.
•This fan is equipped
with a polarized alternat-
ing current line plug (a
plug having one blade
wider than the other).
This plug will fit into the
power outlet only one
way. This is a safety fea-
ture. If you are unable to
insert the plug fully into
the outlet, try reversing
the plug. If the plug
should still fail to fit, con-
tact an electrician to
replace the obsolete out-
let. Do not defeat the
safety purpose of the
polarized plug.
•Close supervision is
necessary when any
appliance is used by or
near children.
•Unplug the fan from the
outlet when not in use,
when moving fan from
one location to another
and before cleaning.
•Do not operate the fan
in the presence of explo-
sive and/or flammable
fumes.
•Do not place the fan or
any parts near an open
flame, cooking or other
heating appliance.
•Do not operate the fan
with a damaged cord,
INSTRUCTIONS F0R USE AND CARE
plug, after a malfunction
or if dropped or damaged
in any manner.
(See warranty.)
•Avoid contact with
moving fan parts.
•To disconnect, grip the
plug and pull it from the
wall outlet. Never yank
the cord.
•The use of attachments
not recommended by
Honeywell Consumer
Products may be
hazardous.
•Always use on a dry,
level surface.
•Do not hang or mount
fan on a wall or ceiling.
•Do not operate if the
fan housing is removed
or damaged.
•Do not operate without
fan grilles properly in
place.
•A loose fit between the
AC outlet and plug may
cause overheating of the
plug. Have a qualified
electrician replace the
outlet.
WARNING: To reduce the
risk of fire or electrical
shock, do not use this
fan with any solid state
speed control device.

ASSEMBLY INSTRUCTIONS
• Remove the packaging
material from the Fan
Control Box.
• Remove the holding
screw from the rear of
the Fan Control Box
(Fig. 1).
• Push the Fan Control
Box Extension through
the opening in the right
leg of the fan base
(Fig. 1).
Fig. 1
FAN
CONTROL
BOX
HOLDING
SCREW
•Replace the holding
screw and firmly tighten
the Fan Control Box onto
the base (Fig. 1).
NOTE: When installing
the Control Box, make
sure the electrical wires
are located on the out-
side of the base (Fig. 1).
OPERATION
•Set your fan on a level,
dry surface.
•Plug the power cord
into a polarized 120 volt
AC wall outlet.
•Select the desired
speed for your needs. For
maximum air circulation,
you may point the fan
towards the ceiling.
Using this method during
the summer and winter
will move the warm air
from the ceiling, dispers-
ing it and giving you a
more uniform room tem-
perature.
•Adjust the pivoting head
to direct the powerful
breeze where desired.
•Turn the Control to OFF
and UNPLUG THE FAN
BEFORE CLEANING.
•Use only a soft, damp
cloth to clean the fan.
•DO NOT immerse the
fan in water and never
allow water to drip into
the Motor Housing.
•DO NOT use gasoline,
paint thinner or other
chemicals to clean the
fan.
•To clean the Fan Blade,
use 2 screwdrivers to
disengage the 8 hooks
holding the Front Grille to
the Rear Grille (Fig. 2).
•Remove the Front Grille.
•Wipe the Blade and
Grilles.
CLEANING AND STORAGE
•Reassemble the fan by
snapping the Front Grille
into place.
DW-518 Fig. 2
Fig. 2

Item Part no. Part no. Price
Fan Blade HV-140-1 HV-180-1 $ 15.00
Control Box Holding Screw HV-140-2 HV-180-2 $ 4.00
Rubber Feet HV-140-3 HV-180-3 $ 3.00
Front Grille HV-140-4 HV-180-4 $ 10.00
Fan Stand HV-140-5 HV-180-5 $ 15.00
CUSTOMER RELATIONS/REPLACEMENT PARTS
To order by mail, please include $4.50 for shipping and handling and make check or
money order payable to Honeywell Consumer Products Business. Massachusetts
residents add 5% sales tax. Mail to:
Consumer Relations
Honeywell Consumer Products Business
250 Turnpike Road
Southborough, MA 01772
Note: Honeywell Consumer Products Business can not ship to P.O. Box numbers
To speak with a technical representative, or place an order, please call our
Consumer Relations Center, toll-free, at : 1-800-332-1110. Our technical
representatives are available to assist you weekdays from 8:00 am to 10 pm
and weekends from 8:30 am to 5:00 pm EST. Orders may be placed 24
hours a day, seven days a week with Master Card, Visa or Discover.

5 YEAR LIMITED WARRANTY
©1998 All rights reserved. Honeywell Inc. F1075.98 9/98
HV-140/HV-180
Commercial Grade High
Velocity Fan.
This product has been
engineered and crafted
with great care for your
status faction.
You should first read all
instructions before
attempting to use this
product.
The enclosed Customer
Response card should be
filled out and returned
within 7 days of purchase.
A.This 5 year limited war-
ranty applies to repair or
replacement of product
found to be defective in
material or workmanship
during the warranty peri-
od. This warranty does
not apply to damage
resulting from abusive,
unreasonable use or sup-
plemental damage.
Defects that are the
result of normal wear
and tear will not be con-
sidered manufacturing
defects under this war-
ranty. You should first
read the instruction man-
ual before attempting to
use this product.THE
MANUFACTURER IS NOT
LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL
DAMAGES OF ANY
NATURE. Any implied
warranty of mechantabil-
ity or fitness for a partic-
ular purpose on this
product is limited in dura-
tion to the duration of
this warranty. Some juris-
dictions do not allow the
exclusion or limitation of
incidental or consequen-
tial damages, or limita-
tions on how long an
implied warranty lasts, so
the above limitations or
exclusions may not apply
to you. This warranty
gives you specific legal
rights, and you also may
have other rights which
vary from jurisdiction to
jurisdiction. This warran-
ty applies only to the
original purchaser of this
product.
B. At its option, the man-
ufacturer will repair or
replace this product if it
is found to be defective
in material or workman-
ship within the warranty
period. Defective product
should be returned to the
place of purchase in
accordance with store
policy. Thereafter, while
within the warranty peri-
od, any defective product
should be returned to the
manufacturer.
C. This warranty does not
cover damage resulting
from any unauthorized
attempts to repair or from
any use not in accor-
dance with this manual.
D. Return defective prod-
uct, freight paid with
proof of purchase and
$10 for handling, return
packing and shipping
charges, to
manufacturer:
Attn: Repair Department
South Point Distribution
Center
4755 South Point Drive
Memphis TN 38118 USA