Honeywell CT50 User manual

Dolphin™ CT50
with Windows®Embedded 8.1 Handheld
Quick Start Guide
CT50W8-ENUS-QS Rev B
9/15
*CT50W8-ENUS-QS*

Out of the Box
Make sure that your shipping box contains these items:
• Dolphin CT50 mobile computer (Models CT50L0N, CT50LUN, CT50LFN)
• Rechargeable 3.6 VDC Li-ion battery
• Quick start guide and other compliance documents
If you ordered accessories for your mobile computer, verify that they are also
included with the order. Be sure to keep the original packaging in case you
need to return the mobile computer for service.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD™ or microSDHC™ memory cards with Dolphin mobile computers
for maximum performance and durability. Contact a Honeywell sales
representative for additional information on qualified memory card options.
Accessories for the CT50
These accessories are available for the CT50:
• HomeBase (Model CT50-HB)
• Ethernet HomeBase (Model CT50-EB)
• ChargeBase (Model CT50-CB)
• NetBase (Model CT50-NB)
• Quad Battery Charger (Model CT50-QBC)
• Vehicle Power Adapter (Model CT50-MC)
• Vehicle Dock (Model CT50-MB)
• USB Adapter (Model CT50-USB)
• Scan Handle
• Holster

Front Features
Navigation panel
Touch panel
Speaker Good Read LED
Volume buttons
Battery status /
Notification LED
Microphone
Power
button
Scan buttons

Back Features
Camera
button
Camera lens
Battery door
latch
microSIM and microSD door
Battery

Install a microSIM Card

Install a microSD Card
Note: Format the microSD card before initial use.

Install the Battery
The CT50 mobile computers ship with a Li-ion 3.6 VDC, 14.6 watt-hour
battery manufactured for Honeywell International Inc.

32
Charge the Computer
The CT50 mobile computer ships with a partially charged battery. Charge the
battery with a CT50 charging device for a minimum of 4 hours. Using the
computer while charging the battery increases the time required to reach a
full charge.
Caution: We recommend the use of Honeywell accessories and power
adapters. Use of any non-Honeywell accessories or power adapters
may cause damage not covered by the warranty.
Mise en garde : Il est recommandé d'utiliser les périphériques, les
cordons d'alimentation et les adaptateurs secteur conçus par
Honeywell. L'utilisation de tout périphérique, cordon d'alimentation ou
adaptateur secteur d'une autre marque est susceptible de provoquer
des dommages non couverts par la garantie.
The CT50 mobile computers are designed for use with the following charging
accessories: HomeBase, Ethernet HomeBase, ChargeBase, NetBase, Quad
Battery Charger, Vehicle Power Adapter, Vehicle Dock, and USB Adapter.
Caution: Make sure that all components are dry prior to using the
computers and batteries with accessories. Using wet components may
cause damage not covered by the warranty.
Mise en garde : Assurez-vous que tous les composants sont secs avant
de connecter les terminaux/batteries à des périphériques. L'insertion de
composants humides risque de provoquer des dommages non couverts
par la garantie.

Power On the CT50 for the First Time
To learn about creating custom provisioning XML files, see the Windows
Embedded 8.1 Handheld Administrators Guide at https://
technet.microsoft.com/en-us/library/dn499757.aspx.
To quickly start the mobile computer for the first time, use one of these
options.
Option 1: Scan the quick start bar code
1. Press the Power button.
2. From the Welcome screen, select your language and then touch next.
3. Point the computer at the bar code below.
4. Press one of the Scan buttons.
The computer beeps twice and “configuration received” appears on the
screen under Barcode.
5. Touch next. “Configuration progress...” appears on the screen.
When the computer finishes starting up, the Start screen appears.
Option 2: Use the Consumer setup option
1. Press the Power button.
2. From the Welcome screen, select your language and then touch next.
3. On the Set up Your Handheld screen, touch More Options.